Contribution to the Modelling of the Structural Behavior of Reinforced Concrete Walls Under ISO Fire Exposure

被引:0
|
作者
Mohsen Roosefid
Marie-Hélène Bonhomme
Pierre Pimienta
机构
[1] IRSN,Nuclear Safety Division, Equipement and Structure Assessment Departement, Civil Engineering Assessment Section
[2] CSTB,Fire Studies and Tests Division, Safety, Structures and Fire Direction
来源
Fire Technology | 2023年 / 59卷
关键词
Concrete structures; Finite element modelling; Damage model; Reinforced concrete walls; Load induced thermal strain;
D O I
暂无
中图分类号
学科分类号
摘要
In the framework of the international benchmark “Vulcain tests on 3 Walls”, three full scale ISO fire tests on a reinforced concrete wall, simultaneously subjected to a constant uniaxial compressive load, were conducted in CSTB in Paris, France. The duration of these tests exceeded 120 min. In order to assess the capability of available finite elements (FE) models to represent reinforced concrete structural behaviour under fire exposure, IRSN, within the scope of the Vulcain benchmark, set up a modelling with help of Mazars isotropic continuum damage mechanical model (Mazars Application de la mécanique de l’endommagement au comportement non linéaire et à la rupture du béton de structure. PhD Thesis, Univ. Paris 6, ENS Cachan, France, 1984) ran with the CAST3M software (Verpeaux et al. in Fouet, Ladevèze and Ohayon (eds), Calcul des Structures et Intelligence Artificielle, Pluralis, 1988), while a user-defined procedure was used to calculate the concrete properties taking into account load induced thermal strains (LITS). The effect of LITS according to the model of Anderberg and Thelandersson (Stress and deformation characteristics of concrete at high temperatures: 2 experimental investigation and material behavior model, Bulletin 54, Lund Institute of Technology, Lund, 1976) was considered by an explicit term in the strain decomposition. Also, the numerical simulation of three full scale ISO fire tests of Vulcain was carried out with the help of a FE model that takes into account the values of the concrete thermomechanical parameters identified. The numerical model is composed of two different parts, one for heat transfer analysis and the other one for structural analysis based on a three-dimensional FE model including concrete and reinforcing steel meshes. It is illustrated through this numerical investigation that the proposed model can predict the thermomechanical behaviour of reinforced concrete walls under fire exposure.
引用
收藏
页码:3185 / 3201
页数:16
相关论文
共 50 条
  • [21] Structural Failure of Reinforced Concrete Bearing Walls under Fire: A Full-Scale Experimental Investigation
    Mueller, Kevin A.
    Kurama, Yahya C.
    RESPONSE OF STRUCTURES UNDER EXTREME LOADING, 2015, : 677 - 685
  • [22] Evaluation of post-earthquake fire capacity of a reinforced concrete one bay plane frame under ISO fire exposure
    Vitorino, Hugo
    Rodrigues, Hugo
    Couto, Carlos
    STRUCTURES, 2020, 23 : 602 - 611
  • [23] Fire resistance of reinforced concrete bearing walls subjected to all-sided fire exposure
    Lee, S.
    Lee, C.
    MATERIALS AND STRUCTURES, 2013, 46 (06) : 943 - 957
  • [24] Fire resistance of reinforced concrete bearing walls subjected to all-sided fire exposure
    S. Lee
    C. Lee
    Materials and Structures, 2013, 46 : 943 - 957
  • [25] The Seismic Behavior of Reinforced Concrete Structural Walls: Experiments and Modeling
    Kotronis, P.
    Mazars, J.
    Nguyen, X. H.
    Ile, N.
    Reynouard, J. M.
    Bisch, P.
    Coin, A.
    1755 LISBON EARTHQUAKE: REVISITED, 2009, 7 : 363 - +
  • [26] Performance of reinforced concrete slabs under hydrocarbon fire exposure
    Hawileh, R. A.
    Kodur, V. K. R.
    TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY, 2018, 77 : 177 - 187
  • [27] Design of reinforced concrete beams under fire exposure conditions
    Dep of the Environment, London, United Kingdom
    Mag Concr Res, 1 (75-83):
  • [28] Design of reinforced concrete beams under fire exposure conditions
    Desai, SB
    MAGAZINE OF CONCRETE RESEARCH, 1998, 50 (01) : 75 - 83
  • [29] EPOXY-REPAIRED CONCRETE WALLS UNDER FIRE EXPOSURE.
    Plecnik, Joseph M.
    Bresler, Boris
    Chan, Hon M.
    Pham, M.
    Chao, James
    Journal of the Structural Division, 1982, 108 (ST8): : 1894 - 1908
  • [30] Experimental research on seismic behavior of reinforced concrete shear walls after fire
    Liu, Gui-Rong
    Song, Yu-Pu
    Qu, Fu-Lai
    Dalian Ligong Daxue Xuebao/Journal of Dalian University of Technology, 2011, 51 (04): : 555 - 560