Additive Manufacturing of Pure Mo and Mo + TiC MMC Alloy by Electron Beam Powder Bed Fusion

被引：0
|
作者：
Christopher Rock
Edgar Lara-Curzio
Betsy Ellis
Christopher Ledford
Donovan N. Leonard
Rangasayee Kannan
Michael Kirka
Timothy Horn
机构：
[1] Center for Additive Manufacturing and Logistics,Manufacturing Science Division
[2] North Carolina State University,Manufacturing Demonstration Facility
[3] Oak Ridge National Laboratory,Department of Mechanical and Aerospace Engineering
[4] Oak Ridge National Laboratory,undefined
[5] North Carolina State University,undefined
来源：
JOM | 2020年 / 72卷
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A metal matrix composite powder of molybdenum (Mo) + TiC was produced by mechanical alloying (MA) and used in additive manufacturing by electron beam powder bed fusion along with pure Mo powder to form sandwich structures. The Mo + TiC solid layers formed mixed structures of Mo with discrete TiC particles, eutectic Mo + TiC, and Mo dendrites. Thermodynamic modeling showed that the system contained an invariant eutectic reaction in the composition range used and indicated that the system was highly sensitive to changes in composition and temperature.
引用
收藏
页码：4202 / 4213
页数：11
相关论文
共 50 条
  • [41] Tailoring the thermal conductivity of the powder bed in Electron Beam Melting (EBM) Additive Manufacturing
    Smith, C. J.
    Tammas-Williams, S.
    Hernandez-Nava, E.
    Todd, I.
    SCIENTIFIC REPORTS, 2017, 7
  • [42] Tailoring the thermal conductivity of the powder bed in Electron Beam Melting (EBM) Additive Manufacturing
    C. J. Smith
    S. Tammas-Williams
    E. Hernandez-Nava
    I. Todd
    Scientific Reports, 7
  • [43] Mitigation of lack of fusion defects in powder bed fusion additive manufacturing
    Mukherjee, T.
    DebRoy, T.
    JOURNAL OF MANUFACTURING PROCESSES, 2018, 36 : 442 - 449
  • [44] Fatigue properties of a Ti-5Al-5Mo-5 V-3Cr alloy manufactured by electron beam powder bed fusion
    Hendl, J.
    Zeuner, A. T.
    Schettler, S.
    Marquardt, A.
    Leyens, C.
    Zimmermann, M.
    PROGRESS IN ADDITIVE MANUFACTURING, 2024,
  • [45] Changes in Powder Surface Chemistry During Reuse of Pure Copper in Powder Bed Fusion - Electron Beam
    Kazi, Sofia
    Mahoney, Phillip
    Hryha, Eduard
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2025, 72
  • [46] Laser powder bed fusion of Ti15Mo
    Dzogbewu, Thywill Cephas
    RESULTS IN ENGINEERING, 2020, 7
  • [47] Fatigue-based process window for laser beam powder bed fusion additive manufacturing
    Reddy, Tharun
    Ngo, Austin
    Miner, Justin P.
    Gobert, Christian
    Beuth, Jack L.
    Rollett, Anthony D.
    Lewandowski, John J.
    Narra, Sneha P.
    INTERNATIONAL JOURNAL OF FATIGUE, 2024, 187
  • [48] Additive manufacturing of NdFeB magnets by synchronized three-beam laser powder bed fusion
    Yu, Kai-Sheng
    Cheng, Chung-Wei
    Lee, An-Chen
    Jian, Wei-You Jhang
    Chang, Wen-Cheng
    Chang, Tsung-Wei
    Tsai, Mi-Ching
    OPTICS AND LASER TECHNOLOGY, 2022, 146
  • [49] Keyhole pores reduction in laser powder bed fusion additive manufacturing of nickel alloy 625
    Yeung, H.
    Kim, F. H.
    Donmez, M. A.
    Neira, J.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2022, 183
  • [50] Additive manufacturing of dense WE43 Mg alloy by laser powder bed fusion
    Hyer, Holden
    Zhou, Le
    Benson, George
    McWilliams, Brandon
    Cho, Kyu
    Sohn, Yongho
    ADDITIVE MANUFACTURING, 2020, 33
12345