Additive Manufacturing of Pure Mo and Mo + TiC MMC Alloy by Electron Beam Powder Bed Fusion

被引：0
|
作者：
Christopher Rock
Edgar Lara-Curzio
Betsy Ellis
Christopher Ledford
Donovan N. Leonard
Rangasayee Kannan
Michael Kirka
Timothy Horn
机构：
[1] Center for Additive Manufacturing and Logistics,Manufacturing Science Division
[2] North Carolina State University,Manufacturing Demonstration Facility
[3] Oak Ridge National Laboratory,Department of Mechanical and Aerospace Engineering
[4] Oak Ridge National Laboratory,undefined
[5] North Carolina State University,undefined
来源：
JOM | 2020年 / 72卷
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A metal matrix composite powder of molybdenum (Mo) + TiC was produced by mechanical alloying (MA) and used in additive manufacturing by electron beam powder bed fusion along with pure Mo powder to form sandwich structures. The Mo + TiC solid layers formed mixed structures of Mo with discrete TiC particles, eutectic Mo + TiC, and Mo dendrites. Thermodynamic modeling showed that the system contained an invariant eutectic reaction in the composition range used and indicated that the system was highly sensitive to changes in composition and temperature.
引用
收藏
页码：4202 / 4213
页数：11
相关论文
共 50 条
  • [21] Electron beam powder bed fusion manufacturing of a Ti-5Al-5Mo-5V-3Cr alloy: a microstructure and mechanical properties’ correlation study
    Julius Hendl
    Axel Marquardt
    Christoph Leyens
    Progress in Additive Manufacturing, 2023, 8 : 459 - 475
  • [22] Electron beam powder bed fusion manufacturing of a Ti-5Al-5Mo-5V-3Cr alloy: a microstructure and mechanical properties' correlation study
    Hendl, Julius
    Marquardt, Axel
    Leyens, Christoph
    PROGRESS IN ADDITIVE MANUFACTURING, 2023, 8 (03) : 459 - 475
  • [23] Manipulating local heat accumulation towards controlled quality and microstructure of a Co-Cr-Mo alloy in powder bed fusion with electron beam
    Zhao, Yufan
    Koizumi, Yuichiro
    Aoyagi, Kenta
    Yamanaka, Kenta
    Chiba, Akihiko
    MATERIALS LETTERS, 2019, 254 : 269 - 272
  • [24] Processing, microstructures and mechanical response of a 8-metastable Ti-14Mo alloy fabricated by Electron Beam Powder Bed Fusion
    Duport, Mathis
    Lhuisser, Pierre
    Blandin, Jean-Jacques
    Dendievel, Remy
    Veron, Muriel
    Prima, Frederic
    Martin, Guilhem
    ADDITIVE MANUFACTURING, 2023, 61
  • [25] Comprehensive study on mechanisms for grain morphology evolution and texture development in powder bed fusion with electron beam of Co-Cr-Mo alloy
    Zhao, Yufan
    Koizumi, Yuichiro
    Aoyagi, Kenta
    Wei, Daixiu
    Yamanaka, Kenta
    Chiba, Akihiko
    MATERIALIA, 2019, 6
  • [26] Investigation of novel metal additive manufacturing process using plasma electron beam based on powder bed fusion
    Ahn, Dong-Gyu
    Lee, Ho-Jin
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2019, 68 (01) : 245 - 248
  • [27] A review of powder deposition in additive manufacturing by powder bed fusion
    Avrampos, Panagiotis
    Vosniakos, George-Christopher
    JOURNAL OF MANUFACTURING PROCESSES, 2022, 74 : 332 - 352
  • [28] Measurement of powder bed density in powder bed fusion additive manufacturing processes
    Jacob, G.
    Donmez, A.
    Slotwinski, J.
    Moylan, S.
    MEASUREMENT SCIENCE AND TECHNOLOGY, 2016, 27 (11)
  • [29] Co-Cr-Mo Alloy Produced via Powder Bed Laser Fusion
    Khimich, Margarita A.
    Ibragimov, Egor A.
    Saprykin, Natalia A.
    Sharkeev, Yurii P.
    Saprykin, Alexander A.
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS. MATERIALS WITH MULTILEVEL HIERARCHICAL STRUCTURE AND INTELLIGENT MANUFACTURING TECHNOLOGY, 2020, 2310
  • [30] Research progress on powder bed fusion additive manufacturing of TiAl-based alloy
    Jiang, Lulu
    Lan, Liang
    Bai, Chengyan
    Wang, Haoyu
    Gao, Shuang
    He, Bo
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 133 (3-4): : 1045 - 1061
12345