Study on a new mooring system integrating catenary with taut mooring

被引:0
|
作者
Chun-yan Ji
Zhi-ming Yuan
Ming-lu Chen
机构
[1] Jiangsu University of Science and Technology,Institute of Naval Architecture and Ocean Engineering
来源
China Ocean Engineering | 2011年 / 25卷
关键词
catenary; taut mooring system; semi-submersible platform; lumped mass; coupled analysis;
D O I
暂无
中图分类号
学科分类号
摘要
Analyzed are the merits and demerits of catenary mooring system and taut mooring system, which are commonly used nowadays. As falling somewhere between these two systems, a new mooring system integrating catenary with taut mooring is proposed. In order to expound and prove the advantages of this new system, the motion performance of a semi-submersible platform is simulated by employing full time domain coupled analysis method. A comparison of the result of new mooring system with that of taut mooring system shows that the movement of the platform using the new type mooring system is smaller than that using the taut mooring system, which ensures a better working condition. Furthermore, the new mooring system is also compatible with the characteristics of catenary mooring system, which eliminates the requirement of anti-uplift capacity of the anchors.
引用
收藏
页码:427 / 440
页数:13
相关论文
共 50 条
  • [11] ANALYSIS OF CATENARY MOORING SYSTEMS BASED ON TRUNCATED MOORING EXPERIMENTS
    Xu, Sheng
    Ji, Chunyan
    Guedes Soares, C.
    PROCEEDINGS OF THE ASME 37TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2018, VOL 11A, 2018,
  • [12] Experimental study on a spread catenary mooring for FPSO
    Codiglia, R
    Contento, G
    D'Este, F
    Galeazzi, F
    Sole, V
    Coan, A
    Spezzati, M
    PROCEEDINGS OF THE TWELFTH (2002) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 1, 2002, : 132 - 141
  • [13] Analysis of snap loading of a taut mooring system in the slack-taut process
    Qiao D.
    Qi X.
    Yan J.
    Liang H.
    Suo Y.
    Ning D.
    Ou J.
    Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University, 2020, 41 (02): : 206 - 211
  • [14] Equivalent truncation design of catenary mooring and riser system
    Wang H.-W.
    Luo Y.
    Su Y.-M.
    Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University, 2010, 31 (12): : 1565 - 1572
  • [15] CASALM (catenary and single anchor leg mooring) single point mooring
    Flory, JF
    PROCEEDINGS OF THE SIXTH (1996) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL I, 1996, 1996, : 255 - 261
  • [16] Snap tension induced by slack-taut in a mooring system
    School of Civil Engineering, Tianjin University, Tianjin 300072, China
    Zhendong yu Chongji/Journal of Vibration and Shock, 2008, 27 (04): : 70 - 72
  • [17] Extreme loads in taut mooring lines and mooring line induced damping: an asymptotic approach
    Nielsen, FG
    Bindingbo, AU
    APPLIED OCEAN RESEARCH, 2000, 22 (02) : 103 - 118
  • [18] SINGLE LEG CATENARY MOORING AND ANCHORS
    SHIPP, JG
    JOURNAL OF THE WATERWAY PORT COASTAL AND OCEAN DIVISION-ASCE, 1977, 103 (04): : 537 - 546
  • [19] SINGLE LEG CATENARY MOORING AND ANCHORS
    SHIPP, JG
    JOURNAL OF THE WATERWAY PORT COASTAL AND OCEAN DIVISION-ASCE, 1979, 105 (02): : 204 - 204
  • [20] CALIBRATION OF PARTIAL SAFETY FACTORS FOR SUCTION CAISSONS IN CONNECTION TO CATENARY AND TAUT-LEG MOORING SYSTEMS
    Silva-Gonzalez, Francisco L.
    Heredia-Zavoni, Ernesto
    Valle-Molina, Celestino
    Sanchez-Moreno, Jorge
    Gilbert, Robert B.
    PROCEEDINGS OF THE ASME 31ST INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2012, VOL 2, 2012, : 243 - 250