Characterization of Polylactic Acid Parts Produced Using the Fused Deposition Modelling

被引：0
|
作者：
E. Zīle
D. Zeleniakiene
A. Aniskevich
机构：
[1] Institute for Mechanics of Materials,Department of Mechanical Engineering
[2] University of Latvia,undefined
[3] Kaunas University of Technology,undefined
来源：
Mechanics of Composite Materials | 2022年 / 58卷
关键词：
fused deposition modelling; laminate; voids; fiber;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
This work is devoted to studying the mechanical behavior of a polylactic acid (PLA) material produced by the fused deposition modelling. The influence of mesostructure on their macro-scale mechanical properties is characterized by porosity. The dependence of its longitudinal and transverse properties on the porosity is found experimentally. It is shown that, due to the crystallization after melting and extrusion, the properties of a single PLA fiber increase in time. The results obtained show that the classical lamination theory and the Tsai–Hill failure criterion can predict the modulus and strength of PLA printed materials.
引用
收藏
页码：169 / 180
页数：11
相关论文
共 50 条
  • [21] Enhancing Polylactic Acid (PLA) Performance: A Review of Additives in Fused Deposition Modelling (FDM) Filaments
    Plamadiala, Ioan
    Croitoru, Catalin
    Pop, Mihai Alin
    Roata, Ionut Claudiu
    POLYMERS, 2025, 17 (02)
  • [22] Mechanical characterization of polylactic acid, polycaprolactone and Lay-Fomm 40 parts manufactured by fused deposition modeling, as a function of the printing parameters
    Zuleima Parrado-Agudelo, Jessica
    Narvaez-Tovar, Carlos
    REVISTA ITECKNE, 2019, 16 (02): : 111 - 117
  • [23] A review on the potential of polylactic acid based thermoplastic elastomer as filament material for fused deposition modelling
    Musa, Luqman
    Krishna Kumar, Nitiyah
    Abd Rahim, Shayfull Zamree
    Mohamad Rasidi, Mohamad Syahmie
    Watson Rennie, Allan Edward
    Rahman, Rozyanty
    Yousefi Kanani, Armin
    Azmi, Ahmad Azrem
    Journal of Materials Research and Technology, 2022, 20 : 2841 - 2858
  • [24] Residual stress measurement in Fused Deposition Modelling parts
    Casavola, Caterina
    Cazzato, Alberto
    Moramarco, Vincenzo
    Pappalettera, Giovanni
    POLYMER TESTING, 2017, 58 : 249 - 255
  • [25] Microstructure and mechanical properties of filament and fused deposition modelling printed polylactic-acid and carbon-fiber reinforced polylactic-acid
    Shah, Adarsh K.
    Jain, Atul
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2024, 43 (9-10) : 516 - 531
  • [26] ASSESSMENT OF ASSEMBLY PROCEDURES IN FUSED DEPOSITION MODELLING PARTS
    Suarez, Luis
    del Mar Espinosa, Maria
    Dominguez, Manuel
    DYNA, 2021, 96 (01):
  • [27] A study of creep in polycarbonate fused deposition modelling parts
    Salazar-Martin, Antonio G.
    Perez, Marco A.
    Garcia-Granada, Andres-Amador
    Reyes, Guillermo
    Puigoriol-Forcada, Josep M.
    MATERIALS & DESIGN, 2018, 141 : 414 - 425
  • [28] Identification of tensile behaviour of polylactic acid parts manufactured by fused deposition modelling under heat-treated conditions using nonlinear autoregressive with exogenous and transfer function models
    Karabeyoglu, Sencer Sureyya
    Eksi, Olcay
    Istif, Ilyas
    Feratoglu, Kamil
    JOURNAL OF POLYMER ENGINEERING, 2022, 42 (10) : 1004 - 1016
  • [29] Modeling of the chemical finishing process for polylactic acid parts in fused deposition modeling and investigation of its tensile properties
    Jin, Yifan
    Wan, Yi
    Zhang, Bing
    Liu, Zhanqiang
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2017, 240 : 233 - 239
  • [30] Optimization of Fused Deposition Modeling Parameters for Mechanical Properties of Polylactic Acid Parts Based on Kriging and Cuckoo Search
    Yang, Yuan
    Wang, Yiyang
    Xue, Bowen
    Wang, Changxu
    Yang, Bo
    AEROSPACE, 2025, 12 (01)
12345