Changes in surface properties of nitrogen-implanted AISI316L stainless steel

被引：0

作者：

P. Budzynski

K. Polanski

A. P. Kobzev

机构：

[1] Mechanical Faculty of Lublin University of Technology,Department of Solid State Physics

[2] University of Lodz,Frank Laboratory of Neutron Physics

[3] Joint Institute for Nuclear Research,undefined

来源：

Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques | 2008年 / 2卷

关键词：

Austenite; Wear Resistance; Surface Investigation; Neutron Technique; Tribological Test;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The effect of nitrogen ion implantation with an energy of 125 keV and doses of 1 × 1017–1 × 1018 at/cm2 on such tribological characteristics of AISI316L stainless steel as the friction coefficient, wear resistance, and microhardness was studied. The steel surface layer composition was studied by the methods of RBS, XRD, GXRD, SEM, and EDX. The friction coefficient and abrasion resistance of AISI316L stainless steel were measured in air, oxygen and argon atmospheres, and in vacuum. An increase in the abrasion resistance after implantation was detected, which was different for various media. The largest increase in the wear resistance was observed during testing in air. The largest decrease in the friction coefficient was observed for all implanted samples in argon atmosphere. Tribological tests resulted in an increase in nitrogen, carbon, and oxygen concentrations in worn sample fragments in comparison with their concentrations in surface layers immediately after implantation.

引用

页码：657 / 662

页数：5

共 50 条

[41] Influences of Pulse Shaping on Single-Track Clad of AISI316L Stainless Steel by Laser Material Deposition
Wang, Xinlin
Yu, Han
Jiang, Jinkun
Xia, Chengui
Zhang, Zengxia
COATINGS, 2022, 12 (02)
[42] Effect of surface treatment on surface characteristics and biocompatibility of aisi 316L stainless steel
Selvaduray, Guna
Trigwell, Steve
Proceedings of the Frontiers in Biomedical Devices Conference, 2007, : 27 - 28
[43] Features of Local Corrosion of AISI316L Steel Manufactured by Selective Laser Melting
P. A. Kuznetsov
A. V. Krasikov
M. V. Staritsyn
S. Yu. Mushnikova
O. N. Parmenova
Protection of Metals and Physical Chemistry of Surfaces, 2018, 54 : 484 - 489
[44] Dose effect on mechanical properties of high-energy nitrogen implanted 316L stainless steel
Pelletier, H
Müller, D
Mille, P
Cornet, A
Grob, JJ
SURFACE & COATINGS TECHNOLOGY, 2002, 151 : 377 - 382
[45] Features of Local Corrosion of AISI316L Steel Manufactured by Selective Laser Melting
Kuznetsov, P. A.
Krasikov, A. V.
Staritsyn, M. V.
Mushnikova, S. Yu.
Parmenova, O. N.
PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES, 2018, 54 (03) : 484 - 489
[46] Surface hardening of AISI 316L stainless steel using plasma carburizing
Suh, BS
Lee, WJ
THIN SOLID FILMS, 1997, 295 (1-2) : 185 - 192
[47] Effects of Surface Softening on the Mechanical Properties of an AISI 316L Stainless Steel under Cyclic Loading
Fang, Tiehui
Cai, Feng
METALS, 2021, 11 (11)
[48] Conductive and convective heat transfer during welding of AISI316L stainless steel using pulsed Nd: YAG laser
Jayanthi, A.
Venkatramanan, K.
Kumar, K. Suresh
MATERIALS TODAY-PROCEEDINGS, 2020, 22 : 465 - 472
[49] INTEGRAL IMPROVEMENT OF MECHANICAL AND SURFACE PROPERTIES OF AISI 316L STAINLESS STEEL BY LASER SHOCK PROCESSING
Ocana, Jose L.
Diaz, Marcos
Ruiz de lara, Leonardo
Porro, Juan A.
Peral, David
Santiago, J. A.
IRF2016: 5TH INTERNATIONAL CONFERENCE INTEGRITY-RELIABILITY-FAILURE, 2016, : 419 - 420
[50] Influence of low-temperature carburising on metal release from AISI316L austenitic stainless steel in acetic acid
Chiavari, C.
Bernardi, E.
Balijepalli, S. K.
Kaciulis, S.
Ceschini, L.
Martini, C.
JOURNAL OF FOOD ENGINEERING, 2014, 137 : 7 - 15

← 1 2 3 4 5 →