Changes in surface properties of nitrogen-implanted AISI316L stainless steel

被引：0

作者：

P. Budzynski

K. Polanski

A. P. Kobzev

机构：

[1] Mechanical Faculty of Lublin University of Technology,Department of Solid State Physics

[2] University of Lodz,Frank Laboratory of Neutron Physics

[3] Joint Institute for Nuclear Research,undefined

来源：

Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques | 2008年 / 2卷

关键词：

Austenite; Wear Resistance; Surface Investigation; Neutron Technique; Tribological Test;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The effect of nitrogen ion implantation with an energy of 125 keV and doses of 1 × 1017–1 × 1018 at/cm2 on such tribological characteristics of AISI316L stainless steel as the friction coefficient, wear resistance, and microhardness was studied. The steel surface layer composition was studied by the methods of RBS, XRD, GXRD, SEM, and EDX. The friction coefficient and abrasion resistance of AISI316L stainless steel were measured in air, oxygen and argon atmospheres, and in vacuum. An increase in the abrasion resistance after implantation was detected, which was different for various media. The largest increase in the wear resistance was observed during testing in air. The largest decrease in the friction coefficient was observed for all implanted samples in argon atmosphere. Tribological tests resulted in an increase in nitrogen, carbon, and oxygen concentrations in worn sample fragments in comparison with their concentrations in surface layers immediately after implantation.

引用

页码：657 / 662

页数：5

共 50 条

[31] Tribological Properties of AISI 316L Steel Surface Layer Implanted with Rare Earth Element
Sartowska, B.
Barlak, M.
Walis, L.
Starosta, W.
Senatorski, J.
Kosinska, A.
ACTA PHYSICA POLONICA A, 2015, 128 (05) : 923 - 926
[32] Effect of surface treatment on the surface characteristics of AISI 316L stainless steel
Trigwell, Steve
Selvaduray, Guna
MEDICAL DEVICE MATERIALS III: PROCEEDINGS FROM THE MATERIALS & PROCESSES FOR MEDICAL DEVICES CONFERENCE 2005, 2006, : 208 - +
[33] SLIDING PROPERTIES OF COEVAPORATED AND NITROGEN-IMPLANTED PT50TI50 FILMS ON AISI-304 STAINLESS-STEEL
ZHENG, LR
HUNG, LS
MAYER, JW
JOURNAL OF MATERIALS SCIENCE LETTERS, 1988, 7 (09) : 1014 - 1017
[34] Experimental investigation on corrosion and hardness of ion implanted AISI 316L stainless steel
Muthukumaran, V.
Selladurai, V.
Nandhakumar, S.
Senthilkumar, M.
MATERIALS & DESIGN, 2010, 31 (06) : 2813 - 2817
[35] Tribological behavior and corrosion resistance of kolsterized AISI316L austenitic stainless steel: Existing applications in the automotive industry
Institute of Metallurgy, University of Bologna, Italy
不详
不详
J. ASTM Int., 2006, 2
[36] MICROSTRUCTURE OF ULTRAHIGH DOSE NITROGEN-IMPLANTED IRON AND STAINLESS-STEEL
WILLIAMSON, DL
OZTURK, O
GLICK, S
WEI, R
WILBUR, PJ
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 1991, 59 : 737 - 741
[37] MECHANICAL PROPERTIES OF DUPLEX TREATED AISI 316L STAINLESS STEEL
Joska, Zdenek
Kadlec, Jaromir
Hruby, Vojtech
Svoboda, Emil
METAL 2011: 20TH ANNIVERSARY INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2011, : 724 - 728
[38] Cryogenic mechanical properties and tribological behaviors of AISI stainless 316L steel cooled by liquid nitrogen
Xu, Jimin
He, Longgui
Cheng, Shuo
Fang, Xiaoliang
Cryogenics, 2025, 147
[39] Studies on Electron Beam Surface Melting of AISI 316 Stainless Steel and AISI 347 Stainless Steel
Basak, Soumyabrata
Sahu, Kisor K.
Sharm, Sumit K.
Majumdar, J. Dutta
INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS PROCESSING AND MANUFACTURING (SMPM 2017), 2016, 7 : 647 - 653
[40] Electrochemical deposition of black nickel solar absorber coatings on stainless steel AISI316L for thermal solar cells
Lira-Cantú, M
Sabio, AM
Brustenga, A
Gómez-Romero, P
SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2005, 87 (1-4) : 685 - 694

← 1 2 3 4 5 →