A Comparative Study on the Effect of Milling and Abrasive Water Jet Cutting Technologies on the Tensile Behavior of Composite Carbon/Epoxy Laminates

被引：0
|
作者：
A. Abidi
S. Ben Salem
A. Bezazi
H. Boumediri
机构：
[1] Tunis El Manar University,Laboratory of Applied Mechanics and Engineering (LR
[2] Preparatory Institute of Engineering Mrezka Nabeul (IPEIN),MAI), National School of Engineers of Tunis (ENIT)
[3] Carthage University,Laboratoire de Mécanique Appliquée des Nouveaux Matériaux (LMANM)
[4] Université 8 Mai 1945,undefined
来源：
Mechanics of Composite Materials | 2021年 / 57卷
关键词：
CFRP; high-speed milling; abrasive water jet; tension; cutting process;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Tensile tests of composite materials based on carbonfiber reinforced plastics (CFRPs) have been performed to benchmark the impact of action of abrasive water jet (AWJ) and high-speed milling (HSM) on the stiffness and strength of CFRP laminates. CFRP specimens were tested according to the ASTM D3039 and ASTM D5766. The drilled specimens exhibited a linear behavior up to failure, but their stress–strain relation was pronouncedly nonlinear, with higher tensile strains than nondrilled ones. Results showed that ultimate the stress–strain relation and Young’s modulus were affected by the machining process. The stress and strain limits for samples prepared using the AWJ method were higher than for those machined by HSM, but the opposite effect was observed for Young’s modulus.
引用
收藏
页码：539 / 550
页数：11
相关论文
共 50 条
  • [41] Effect of notch and environment on tensile strength of bi-directional carbon/epoxy composite - An experimental study
    Dash, P.K.
    Satish, K.
    Chatterjee, A.K.
    Journal of the Institution of Engineers (India): Aerospace Engineering Journal, 2001, 82 (01): : 7 - 15
  • [42] Study of post-impact behaviour of thin hybrid carbon/epoxy and glass/epoxy woven composite laminates under fatigue tensile loading - Part II: Numerical study
    Rogani, A.
    Navarro, P.
    Marguet, S.
    Ferrero, J-F.
    Lanouette, C.
    COMPOSITE STRUCTURES, 2021, 260
  • [43] Study of the surface quality of carbon fiber–reinforced thermoplastic matrix composite (CFRTP) machined by abrasive water jet (AWJM)
    Fermin Bañon
    Alejandro Sambruno
    Moises Batista
    Bartolome Simonet
    Jorge Salguero
    The International Journal of Advanced Manufacturing Technology, 2020, 107 : 3299 - 3313
  • [44] Study of post-impact behaviour of thin hybrid carbon/epoxy and glass/epoxy woven composite laminates under fatigue tensile loading-Part I : Experimental study
    Rogani, A.
    Navarro, P.
    Marguet, S.
    Ferrero, J-F.
    Lanouette, C.
    COMPOSITE STRUCTURES, 2021, 260
  • [45] Study of the surface quality of carbon fiber-reinforced thermoplastic matrix composite (CFRTP) machined by abrasive water jet (AWJM)
    Banon, Fermin
    Sambruno, Alejandro
    Batista, Moises
    Simonet, Bartolome
    Salguero, Jorge
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 107 (7-8): : 3299 - 3313
  • [46] Post fire behavior of carbon fibers Polyphenylene Sulfide- and epoxy-based laminates for aeronautical applications: A comparative study
    Vieille, Benoit
    Lefebvre, Cedric
    Coppalle, Alexis
    MATERIALS & DESIGN, 2014, 63 : 56 - 68
  • [47] Progressive failure analysis of carbon-fibre/epoxy composites laminates to study the effect of stitch densities under in-plane tensile loading
    Joshi, Prabij
    Kondo, Atsushi
    Watanabe, Naoyuki
    PLASTICS RUBBER AND COMPOSITES, 2017, 46 (04) : 147 - 154
  • [48] A STUDY ON TRAVERSE RATE OF SEPARATION CUT IN ABRASIVE WATER JET CUTTING OF CARBON STEEL S275JR USING REGRESSION ANALYSIS METHOD
    Miroslav, Radovanovic
    Milos, Madic
    PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND EDUCATION (MSE 2011), VOL I, 2011, : 227 - 230
  • [49] Study of environmental behavior and its effect on solid particle erosion behavior of hierarchical porous activated carbon-epoxy composite
    Panchal, Manoj
    Minugu, Om Prakash
    Gujjala, Raghavendra
    Ojha, Shakuntala
    Chowdary, Somaiah Mallampati
    Mohammad, Alamgir
    POLYMER COMPOSITES, 2022, 43 (04) : 2276 - 2287
  • [50] The Effect of Single and Double-wefted Styles on the In-plane Impact Behavior of Fabric Carbon-aramid/Epoxy Intralayer Hybrid Composite Laminates
    Xi, Jiaojiao
    Yu, Jingyun
    Yu, Zhiqiang
    FIBERS AND POLYMERS, 2019, 20 (06) : 1301 - 1310
12345