A Comparative Study on the Effect of Milling and Abrasive Water Jet Cutting Technologies on the Tensile Behavior of Composite Carbon/Epoxy Laminates

被引：0
|
作者：
A. Abidi
S. Ben Salem
A. Bezazi
H. Boumediri
机构：
[1] Tunis El Manar University,Laboratory of Applied Mechanics and Engineering (LR
[2] Preparatory Institute of Engineering Mrezka Nabeul (IPEIN),MAI), National School of Engineers of Tunis (ENIT)
[3] Carthage University,Laboratoire de Mécanique Appliquée des Nouveaux Matériaux (LMANM)
[4] Université 8 Mai 1945,undefined
来源：
Mechanics of Composite Materials | 2021年 / 57卷
关键词：
CFRP; high-speed milling; abrasive water jet; tension; cutting process;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Tensile tests of composite materials based on carbonfiber reinforced plastics (CFRPs) have been performed to benchmark the impact of action of abrasive water jet (AWJ) and high-speed milling (HSM) on the stiffness and strength of CFRP laminates. CFRP specimens were tested according to the ASTM D3039 and ASTM D5766. The drilled specimens exhibited a linear behavior up to failure, but their stress–strain relation was pronouncedly nonlinear, with higher tensile strains than nondrilled ones. Results showed that ultimate the stress–strain relation and Young’s modulus were affected by the machining process. The stress and strain limits for samples prepared using the AWJ method were higher than for those machined by HSM, but the opposite effect was observed for Young’s modulus.
引用
收藏
页码：539 / 550
页数：11
相关论文
共 50 条
  • [31] Experimental study on hole quality and its impact on tensile behavior following pure and abrasive waterjet cutting of plain woven CFRP laminates
    Li, Maojun
    Huang, Mingjie
    Yang, Xujing
    Li, Shuo
    Wei, Kai
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 99 (9-12): : 2481 - 2490
  • [32] Effect of abrasive water-jet treatment on surface characteristics and epoxy adhesive bonding performance of carbon steel
    Park, Sanghong
    Kim, Aran
    Kainuma, Shigenobu
    Ikeda, Tatsuya
    Toyota, Yusuke
    Arakawa, Takehiko
    PROGRESS IN ORGANIC COATINGS, 2025, 201
  • [33] Effect of high through-thickness compressive stress on fibre direction tensile strength of carbon/epoxy composite laminates
    Gan, Khong Wui
    Wisnom, Michael R.
    Hallett, Stephen R.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2014, 90 : 1 - 8
  • [34] Effect of patch hybridization on the tensile behavior of patch repaired glass/epoxy composite laminates using acoustic emission monitoring
    Andrew, J. Jefferson
    Arumugam, V.
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2017, 74 : 155 - 166
  • [35] Evaluation of hole quality to explore the influence of graphene nanoplatelets embedded in epoxy/carbon composite during abrasive water jet drilling
    Thakur, Raju Kumar
    Singh, Kalyan Kumar
    JOURNAL OF MANUFACTURING PROCESSES, 2023, 85 : 569 - 583
  • [36] Flexural Strength and Failure Behavior of Glass Laminate Aluminum Reinforced Epoxy and Aluminum-Lithium Laminates in Abrasive Water Jet Peening Under Contamination
    Qutaba, Syed
    Sandy, Galang
    Ahmed, Sajjad
    Azhari, Azmir
    INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2025, 22 (01) : 12000 - 12015
  • [37] Effect of Water Absorption on the Tensile Properties of Carbon-Glass/Epoxy Hybrid Composite in Low Temperature
    Jung, Hana
    Kim, Yonjig
    KOREAN JOURNAL OF METALS AND MATERIALS, 2012, 50 (10): : 729 - 734
  • [38] The Abrasive Water Jet Cutting Process of Carbon-Fiber-Reinforced Polylactic Acid Samples Obtained by Additive Manufacturing: A Comparative Analysis
    de la Rosa, Sergio
    Rodriguez-Parada, Lucia
    Ponce, Moises Batista
    Ares, Pedro F. Mayuet
    JOURNAL OF COMPOSITES SCIENCE, 2024, 8 (10):
  • [39] Effect of multiphase fiber system and stacking sequence on low-velocity impact and residual tensile behavior of glass/epoxy composite laminates
    Jefferson, Andrew J.
    Srinivasan, Sivakumar M.
    Arockiarajan, A.
    POLYMER COMPOSITES, 2019, 40 (04) : 1450 - 1462
  • [40] Experimental and numerical study of tensile behavior of carbon nanotube reinforced glass-epoxy composite: The multiscale approach
    Allahdadian, AliAkbar
    Mashayekhi, Mohammad
    COMPOSITE STRUCTURES, 2023, 304
12345