Macro-alloying Effects of Al and Ag on the Age-Hardening Behavior and Precipitates Microstructure of a Mg-4Sn Alloy

被引:1
|
作者
Xuefei Huang
Shuhai Huang
机构
[1] Sichuan University,College of Materials Science and Engineering
[2] Southwest Technology and Engineering Research Institute,undefined
来源
JOM | 2020年 / 72卷
关键词
D O I
暂无
中图分类号
学科分类号
摘要
The effects of macro-alloying of Al and Ag on the age-hardening behavior and precipitates microstructure of a Mg-4Sn alloy aged at 160°C were investigated. All the alloys exhibited a similar hardening trend, and achieved the peak-aged state around 230 h. The peak-aged Mg-4Sn alloy contained several thin basal plates and a few Mg2Sn laths heterogeneously distributed within the matrix, which resulted in a poor hardening response. The Mg-4Sn-4Al alloy exhibited an improved age-hardening response by the enhanced precipitation process and an increased volume fraction of the Mg2Sn precipitates. An addition of 1.5 wt.% Ag to the ternary alloy significantly refined the Mg2Sn precipitates. In the peak-aged Mg-4Sn-4Al-1.5Ag alloy, Al and Ag solute atoms still supersaturated the α-Mg matrix, thus further improving the hardness by the solid-solution strengthening effect. Some Ag atoms segregated with the Mg2Sn precipitates, and minor Ag-enriched particles were also formed. In contrast, Al distributed more uniformly in the matrix.
引用
收藏
页码:1384 / 1394
页数:10
相关论文
共 50 条
  • [31] Effects of substituting ytterbium for scandium on the microstructure and age-hardening behaviour of Al-Sc alloy
    Tuan, N. Q.
    Pinto, A. M. P.
    Puga, H.
    Rocha, L. A.
    Barbosa, J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 601 : 70 - 77
  • [32] Effect of the natural aging time on the age-hardening response and precipitation behavior of the Al-0.4Mg-1.0Si-(Sn) alloy
    Tu, Wenbin
    Tang, Jianguo
    Ye, Lingying
    Cao, Lingfei
    Zeng, Yu
    Zhu, Qianqian
    Zhang, Yong
    Liu, Shengdan
    Ma, Lehang
    Lu, Jinkun
    Yang, Bing
    MATERIALS & DESIGN, 2021, 198 (198)
  • [33] Effects of Pb/Sn additions on the age-hardening behaviour of Mg-4Zn alloys
    Wei, Shanghai
    Zhu, Tianping
    Hou, Haibo
    Kim, JaeHwang
    Kobayashi, Equo
    Sato, Tatsuo
    Hodgson, Michael
    Gao, Wei
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 597 : 52 - 61
  • [34] On the age-hardening of an Al-Zn-Mg-Cu alloy: A vacancy perspective
    Liu, M.
    Klobes, B.
    Maier, K.
    SCRIPTA MATERIALIA, 2011, 64 (01) : 21 - 24
  • [35] Microstructure, Mechanical Properties, and Age-Hardening Behavior of an Al-Si-Fe-Mn-Cu-Mg Alloy Produced by Spray Deposition
    Wang Feng
    Zhang Jishan
    Xiong Baiqing
    Zhang Yongan
    Journal of Materials Engineering and Performance, 2011, 20 : 155 - 159
  • [36] Age-hardening behavior of cast Al-Si base alloy
    Li, RX
    Li, RD
    Zhao, YH
    He, LZ
    Li, CX
    Guan, HR
    Hu, ZQ
    MATERIALS LETTERS, 2004, 58 (15) : 2096 - 2101
  • [37] Microstructure, Mechanical Properties, and Age-Hardening Behavior of an Al-Si-Fe-Mn-Cu-Mg Alloy Produced by Spray Deposition
    Wang Feng
    Zhang Jishan
    Xiong Baiqing
    Zhang Yongan
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2011, 20 (01) : 155 - 159
  • [38] Effects of Fe Addition on Rolling and Age-Hardening Behavior in Al-Si-Mg Alloys
    Kim, DaeHwan
    Kim, JaeHwang
    Son, HyeonTaek
    Woo, KeeDo
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2017, 17 (06) : 4165 - 4168
  • [39] Remarkable age-hardening response and microstructural evolution of Mg-7Sn alloy
    Tong, Lin
    Jiang, Jing
    Bi, Guangli
    Xu, Zuocheng
    Li, Yuandong
    Chen, Tijun
    Zhang, Xiaoru
    Fu, Wei
    Fang, Daqing
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 1442 - 1453
  • [40] Effect of Sn addition on age-hardening and precipitation behavior of Al-Mg-Si alloys with different Mg/Si ratios
    Tu, Wenbin
    Tang, Jianguo
    Wang, Shanlin
    Ma, Lehang
    Zhao, Yan
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2023, 51 (10): : 68 - 75