Doping and processing epitaxial GexSi1-x films on Si(100) by ion implantation for Si-based heterojunction devices applications

The question of whether one can effectively dope or process epitaxial Si(100)/ GeSi heterostructures by ion implantation for the fabrication of Si-based heterojunction devices is experimentally investigated. Results that cover several different ion species (B, C, Si, P, Ge, As, BF,, and Sb), doses (10(13) to 10(16)/cm(2)), implantation temperatures (room temperature to 150 degrees C), as well as annealing techniques (steady-state and rapid thermal annealing) are included in this minireview, and the data are compared with those available in the literature whenever possible. Implantation-induced damage and strain and their annealing behavior for both strained and relaxed GeSi are measured and contrasted with those in Si and Ge. The damage and strain generated in pseudomorphic GeSi by room-temperature implantation are considerably higher than the values interpolated from those of Si and Ge. Implantation at slightly elevated substrate temperatures (e.g., 100 degrees C) can very effectively suppress the implantation-induced damage and strain in GeSi. The fractions of electrically active dopants in both Si and GeSi are measured and compared for several doses and under various annealing conditions. Solid-phase epitaxial regrowth of GeSi amorphized by implantation has also been studied and compared with regrowth in Si and Ge. For the case of metastable epi-GeSi amorphized by implantation, the pseudomorphic strain in the regrown GeSi is always lost and the layer contains a high density of defects, which is very different from the clean regrowth of Si(100). Solid-phase epitaxy, however, facilitates the activation of dopants in both GeSi and Si, irrespective of the annealing techniques used. For metastable GeSi films that are not amorphized by implantation, rapid thermal annealing is shown to outperform steady-state annealing for the preservation of pseudomorphic strain and the activation of dopants. In general, defects generated by ion implantation can enhance the strain relaxation process of strained GeSi during post-implantation annealing. The processing window that is optimized for ion-implanted Si, therefore, has to be modified considerably for ion-implanted GeSi. However, with these modifications, the mature ion implantation technology can be used to effectively dope and process Si/GeSi heterostructures for device applications. Possible impacts of implantation-induced damage on the reliability of Si/GeSi heterojunction devices are briefly discussed.