Analysis of the creep response of the AE44 magnesium alloy between 100 and 150°C

被引:0
|
作者
Spigarelli, S. [1 ]
Evangelista, E. [1 ]
Cabibbo, M. [1 ]
El Mehtedi, M. [1 ]
机构
[1] Unic Politecn Marche, Dipartimento Meccan, I-60131 Ancona, Italy
来源
关键词
creep; minimum creep rate; composite model; rare Earths;
D O I
暂无
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The creep response of the AE44 magnesium alloy was investigated by means of constant load creep tests carried out between 100 and 150 degrees C. The minimum creep rate dependence on applied stress was described by a conventional power law, with a stress exponent n larger than 30 at the highest temperature. The minimum creep rate in the low stress regime was thus about two orders of magnitude lower in AE44 than in AM50. This large difference in creep response has been attributed to the presence and evolution of rare earths (RE) intermetallic phases mainly distributed in the grain boundary zone in form of an almost continuous network of dispersoids, that were observed by means of optical and scanning electron microscopy.
引用
收藏
页码:401 / +
页数:2
相关论文
共 50 条
  • [21] The Characterization of Stress Corrosion Cracking in the AE44 Magnesium Casting Alloy Using Quantitative Fractography Methods
    Sozanska, Maria
    Moscicki, Adrian
    Czujko, Tomasz
    MATERIALS, 2019, 12 (24)
  • [22] Interaction between AE44 magnesium alloy and SiC-Al2O3-SiO2 ceramic foam
    Steinacher, Matej
    Mrvar, Primoz
    Zupanic, Franc
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2015, 25 (03) : 1011 - 1019
  • [23] Validated numerical modelling of galvanic corrosion for couples: Magnesium alloy (AE44)-mild steel and AE44-aluminium alloy (AA6063) in brine solution
    Deshpande, Kiran B.
    CORROSION SCIENCE, 2010, 52 (10) : 3514 - 3522
  • [24] A comparative study of the microstructures and creep behavior of AE42 and AE44 die-casting alloys
    Zhu, S. M.
    Gibson, M. A.
    Nie, J. F.
    Easton, M. A.
    Bakke, Per
    MAGNESIUM TECHNOLOGY 2008, 2008, : 437 - +
  • [25] Comparison of corrosion pitting under immersion and salt-spray environments on an as-cast AE44 magnesium alloy
    Martin, Holly J.
    Horstemeyer, M. F.
    Wang, Paul T.
    CORROSION SCIENCE, 2010, 52 (11) : 3624 - 3638
  • [26] The effect of different high pressure die casting parameters on 3D microstructure and mechanical properties of AE44 magnesium alloy
    Tong-tong Zhang
    Wen-bo Yu
    Chao-sheng Ma
    Wan-tong Chen
    Lin Zhang
    Shou-mei Xiong
    Journal of Magnesium and Alloys, 2023, (09) : 3141 - 3150
  • [27] Uncovering Ce-rich clusters and their role in precipitation strengthening of an AE44 alloy
    Schwarz, Tim M.
    Zhan, Hongyi
    Gault, Baptist
    Gourlay, Christopher M.
    McCarroll, Ingrid
    SCRIPTA MATERIALIA, 2023, 232
  • [28] Time Dependent Analysis of Galvanic Corrosion on Mild Steel with Magnesium Alloy (AE44) Rivet-Plate Joint System Using COMSOL Multiphysics Simulation
    Gupta D.
    Kumar Y.
    Prajapati V.
    Kalam A.
    Dubey M.
    Journal of Bio- and Tribo-Corrosion, 2022, 8 (04)
  • [29] The effect of different high pressure die casting parameters on 3D microstructure and mechanical properties of AE44 magnesium alloy
    Zhang, Tong-tong
    Yu, Wen-bo
    Ma, Chao-sheng
    Chen, Wan-tong
    Zhang, Lin
    Xiong, Shou-mei
    JOURNAL OF MAGNESIUM AND ALLOYS, 2023, 11 (09) : 3141 - 3150
  • [30] The effect of different high pressure die casting parameters on 3D microstructure and mechanical properties of AE44 magnesium alloy
    Tongtong Zhang
    Wenbo Yu
    Chaosheng Ma
    Wantong Chen
    Lin Zhang
    Shoumei Xiong
    Journal of Magnesium and Alloys, 2023, 11 (09) : 3141 - 3150