Microstructure and mechanical performance of new Al0.5CrFe1.5MnNi0.5 high-entropy alloys improved by plasma nitriding

被引：50
|
作者：
Tang, Wei-Yeh [1 ]
Chuang, Ming-Hao [1 ]
Chen, Hsuan-You [1 ]
Yeh, Jien-Wei [1 ]
机构：
[1] Natl Tsing Hua Univ, Dept Mat Sci & Engn, Hsinchu 300, Taiwan
来源：
SURFACE & COATINGS TECHNOLOGY | 2010年 / 204卷 / 20期
关键词：
High-entropy alloys; Plasma nitriding; rho Phase; Sliding wear; WEAR-RESISTANCE; SYSTEM; FCC;
D O I：
10.1016/j.surfcoat.2010.02.045
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Effects of plasma nitriding at 525 degrees C on microstructure and mechanical performance of a brand-new Al0.5CrFe1.5MnNi0.5 high-entropy alloy (HEA) were investigated. This alloy exhibits a large age hardening effect at temperatures from 600 to 800 degrees C and can be well-nitrided in the as-cast condition or the homogenized and furnace-cooled state. The nitrided layer has a thickness around 75 mu m and a peak hardness level of Hv 1250 near the surface. The nitrided Al0.5CrFe1.5MnNi0.5 alloys exhibit superior adhesive wear resistance to conventional nitrided steels by 25-54 times due to their much thicker highly-hardened layer and higher peak hardness than that of conventional steels. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码：3118 / 3124
页数：7
相关论文
共 50 条
  • [41] Microstructure and properties of Al0.5CoCrCuFeNiTix (x=0-2.0) high-entropy alloys
    Chen, Min-Rui
    Lin, Su-Jien
    Yeh, Jien-Wei
    Chen, Swe-Kai
    Huang, Yuan-Sheng
    Tu, Chin-Pang
    MATERIALS TRANSACTIONS, 2006, 47 (05) : 1395 - 1401
  • [42] Evolution of Microstructure of AlCoCrFeNiTi0.5 High-Entropy Alloys in the Process of Solidification
    Wang Yifei
    Yang Haiyu
    RARE METAL MATERIALS AND ENGINEERING, 2014, 43 (10) : 2459 - 2462
  • [43] Microstructure and Mechanical Properties of the Plasma-Sprayed and Cold-Sprayed Al0.5CoCrFeNi2Ti0.5 High-Entropy Alloy Coatings
    Rotich Sammy Kiplangat
    Tzu-Tang Lin
    Ngetich Gilbert Kipkirui
    Shih-Hsun Chen
    Journal of Thermal Spray Technology, 2022, 31 : 1207 - 1221
  • [44] Microstructure and Mechanical Properties of the Plasma-Sprayed and Cold-Sprayed Al0.5CoCrFeNi2Ti0.5 High-Entropy Alloy Coatings
    Kiplangat, Rotich Sammy
    Lin, Tzu-Tang
    Kipkirui, Ngetich Gilbert
    Chen, Shih-Hsun
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2022, 31 (04) : 1207 - 1221
  • [45] Direct active soldering of Al0.3CrFe1.5MnNi0.5 high entropy alloy to 6061-Al using Sn-Ag-Ti active solder
    Tsao, L. C.
    Chang, S. Y.
    Yu, Y. C.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2018, 28 (04) : 748 - 756
  • [46] Microstructure and corrosion properties of AlxCuFeNiCoCr(x=0.5, 1.0, 1.5, 2.0) high entropy alloys with Al content
    Hu, Rong
    Du, Jinghong
    Zhang, Yijie
    Ji, Quanxin
    Zhang, Rongrong
    Chen, Jiaxing
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 921
  • [47] High-temperature Mechanical Properties and Microstructure of ZrTiHfNbMox (x=0.5, 1.0, 1.5) Refractory High Entropy Alloys
    Chen, Y. W.
    Li, Y. K.
    Cheng, X. W.
    Wu, C.
    Cheng, B.
    INTERNATIONAL CONFERENCE ON COMPUTER INFORMATION AND AUTOMATION ENGINEERING, 2018, 359
  • [48] Microstructure and tensile properties of Al0.5CoCrCuFeNi high-entropy alloy
    Sheng, Hong Fei
    Peng, Liang Ming
    RESEARCH IN MECHANICAL ENGINEERING AND MATERIAL SCIENCE, 2014, 456 : 494 - 497
  • [49] Computational exploration of biomedical HfNbTaTiZr and Hf0.5Nb0.5Ta0.5Ti1.5Zr refractory high-entropy alloys
    Bhandari, Uttam
    Ghadimi, Hamed
    Zhang, Congyan
    Gao, Feng
    Yang, Shizhong
    Guo, Shengmin
    MATERIALS RESEARCH EXPRESS, 2021, 8 (09)
  • [50] Microstructure, mechanical and corrosion performance of magnetron sputtered (Al0.5CoCrFeNi)Nx high-entropy alloy nitride films
    Zhang, Fanyong
    Ma, Honglu
    Zhao, Ruibin
    Yu, Guangxing
    Chen, Jiawen
    Yin, Fuxing
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 968
12345