Microstructure and mechanical performance of new Al0.5CrFe1.5MnNi0.5 high-entropy alloys improved by plasma nitriding

被引：50
|
作者：
Tang, Wei-Yeh [1 ]
Chuang, Ming-Hao [1 ]
Chen, Hsuan-You [1 ]
Yeh, Jien-Wei [1 ]
机构：
[1] Natl Tsing Hua Univ, Dept Mat Sci & Engn, Hsinchu 300, Taiwan
来源：
SURFACE & COATINGS TECHNOLOGY | 2010年 / 204卷 / 20期
关键词：
High-entropy alloys; Plasma nitriding; rho Phase; Sliding wear; WEAR-RESISTANCE; SYSTEM; FCC;
D O I：
10.1016/j.surfcoat.2010.02.045
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Effects of plasma nitriding at 525 degrees C on microstructure and mechanical performance of a brand-new Al0.5CrFe1.5MnNi0.5 high-entropy alloy (HEA) were investigated. This alloy exhibits a large age hardening effect at temperatures from 600 to 800 degrees C and can be well-nitrided in the as-cast condition or the homogenized and furnace-cooled state. The nitrided layer has a thickness around 75 mu m and a peak hardness level of Hv 1250 near the surface. The nitrided Al0.5CrFe1.5MnNi0.5 alloys exhibit superior adhesive wear resistance to conventional nitrided steels by 25-54 times due to their much thicker highly-hardened layer and higher peak hardness than that of conventional steels. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码：3118 / 3124
页数：7
相关论文
共 50 条
  • [31] Microstructure and mechanical properties of TiNbV0.5 Ta0.5Crx (x=0, 0.1, 0.2, 0.5) refractory high-entropy alloys
    Chen, Yuxiang
    Li, Mingyang
    Li, Ningyu
    Wang, Yijie
    Liu, Kang
    Chang, Yongqin
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2025, 211 : 254 - 266
  • [32] Microstructural, mechanical and electrochemical characterization of TiZrTaHfNb and Ti1.5ZrTa0.5Hf0.5Nb0.5 refractory high-entropy alloys for biomedical applications
    Motallebzadeh, Amir
    Peighambardoust, Naeimeh Sadat
    Sheikh, Saad
    Murakami, Hideyuki
    Guo, Sheng
    Canadinc, Demircan
    INTERMETALLICS, 2019, 113
  • [33] Development of novel CoCu0.5FeNiVTix (x=0.5, 1, 1.5, 2) high-entropy alloys
    Ye, Haimei
    Zhan, Yongzhong
    Nie, Na
    MATERIALS SCIENCE AND TECHNOLOGY, 2018, 34 (08) : 952 - 960
  • [34] Synthesis of Al0.5CoCrCuFeNi and Al0.5CoCrFeMnNi High-Entropy Alloys by Laser Melting
    Novak, Travis G.
    Vora, Hitesh D.
    Mishra, Rajiv S.
    Young, Marcus L.
    Dahotre, Narendra B.
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2014, 45 (05): : 1603 - 1607
  • [35] Microstructure, phase stability, and mechanical properties of (AlLiMg0.5Ti1.5)100-xScx lightweight high-entropy alloys
    Dong, Quan
    Li, Meng
    Liu, Xuejian
    Zhang, Yufei
    Zhang, Jing
    INTERMETALLICS, 2024, 164
  • [36] Synthesis of Al0.5CoCrCuFeNi and Al0.5CoCrFeMnNi High-Entropy Alloys by Laser Melting
    Travis G. Novak
    Hitesh D. Vora
    Rajiv S. Mishra
    Marcus L. Young
    Narendra B. Dahotre
    Metallurgical and Materials Transactions B, 2014, 45 : 1603 - 1607
  • [37] Microstructure and Mechanical Performance of AlxCoCrCuFeNi High-Entropy Alloys
    Liu Yuan
    Chen Min
    Li Yanxiang
    Chen Xiang
    RARE METAL MATERIALS AND ENGINEERING, 2009, 38 (09) : 1602 - 1607
  • [38] Microstructure and mechanical performance of AlxCoCrCuFeNi high-entropy alloys
    Liu, Yuan
    Chen, Min
    Li, Yanxiang
    Chen, Xiang
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2009, 38 (09): : 1602 - 1607
  • [39] Microstructure and mechanical properties of refractory HfMo0.5NbTiV0.5Six high-entropy composites
    Liu, Yuan
    Zhang, Yan
    Zhang, Heng
    Wang, Naijuan
    Chen, Xiang
    Zhang, Huawei
    Li, Yanxiang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 694 : 869 - 876
  • [40] Effect of Aluminum Content on Microstructure and Mechanical Properties of AlxCoCrFeMo0.5Ni High-Entropy Alloys
    Chin-You Hsu
    Chien-Chang Juan
    Tsing-Shien Sheu
    Swe-Kai Chen
    Jien-Wei Yeh
    JOM, 2013, 65 : 1840 - 1847
12345