Improved oxidation resistance properties of Si3N4/O′-SiAlON composite ceramics by a repeated sintering method

被引：2
|
作者：
Ma, Haiqiang [1 ]
Bao, Chonggao [1 ]
机构：
[1] Xi An Jiao Tong Univ, State Key Lab Mech Behav Mat, Xian 710049, Shaanxi, Peoples R China
来源：
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY | 2022年 / 19卷 / 05期
基金：
中国国家自然科学基金;
关键词：
oxidation resistance; Si3N4/O '-SiAlON composites; two-time sintering; weight gain; SILICON-NITRIDE; MECHANICAL-PROPERTIES; FLEXURAL STRENGTH; LIQUID-PHASE; MICROSTRUCTURE; BEHAVIOR;
D O I：
10.1111/ijac.14102
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Si3N4/O'-SiAlON composite ceramics with superior oxidation resistance properties were fabricated by a repeated sintering method. The effects of sintering time on the phase evolution, microstructure, and oxidation resistance properties of the Si3N4/O'-SiAlON composite ceramics were investigated. The results indicated that the content of the O'-SiAlON phase and the densification of Si3N4/O'-SiAlON composite ceramics increased after two-time sintering. Furthermore, the thickness of the oxide layer of the Si3N4/O'-SiAlON composite ceramics after oxidation at 1100-1500 degrees C for 30 h was not significant. Compared to the oxidation weight gain after the one-time sintering process, the oxidation weight gain of Si3N4/O'-SiAlON composite ceramics was 0.432 mg/cm(2) after two-time sintering when oxidized at 1500 C for 30 h, which was reduced by 43.3%. The mechanism of the improved oxidation resistance properties was ascribed to the formation of more O'-SiAlON and the enhancement of the densification.
引用
收藏
页码：2905 / 2915
页数：11
相关论文
共 50 条
  • [31] Effect of holding time on microstructure and properties of dense α-Si3N4/Sialon composite coating on porous Si3N4 ceramic
    Wang, Chao
    Qiao, Ruiqing
    Xiao, Li
    Chen, Lijia
    CERAMICS INTERNATIONAL, 2016, 42 (15) : 17513 - 17517
  • [32] Mechanical, dielectric properties and thermal shock resistance of porous Si2N2O/Si3N4 composite ceramics
    Wei Liting
    Yu Yinhu
    Jiao Jiao
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2018, 19 (02): : 126 - 129
  • [33] Sintering Behavior and Properties of Si3N4 Ceramics with Yttrium Chloride Additive
    Lu, Du
    Ning, Xiaoshan
    Chen, Kexin
    Zhou, Heping
    HIGH-PERFORMANCE CERAMICS VII, PTS 1 AND 2, 2012, 512-515 : 841 - 848
  • [34] Effect of sintering additives on the oxidation behavior of Si3N4 ceramics at 1300°C
    Houjou, K
    Ando, K
    Chu, MC
    Liu, SP
    Sato, S
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2005, 25 (05) : 559 - 567
  • [35] Effects of sintering aids on mechanical and dielectric properties of Si3N4 ceramics
    Zhao, D. L.
    Zhang, Y. J.
    Gong, H. Y.
    Nie, L. F.
    Zhao, L.
    MATERIALS RESEARCH INNOVATIONS, 2010, 14 (04) : 338 - 341
  • [36] Influence of Sintering Additives and TiC on Properties of TiC/Si3N4 Ceramics
    Jiang, Yong
    Wu, Laner
    Sun, Wenzhou
    POWDERS AND GRAINS 2013, 2013, 1542 : 125 - 128
  • [37] Effects of sintering additives on mechanical properties and microstructure of Si3N4 ceramics by microwave sintering
    Xu, Weiwei
    Yin, Zengbin
    Yuan, Juntang
    Wang, Zhenhua
    Fang, Yihang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 684 : 127 - 134
  • [38] Fabrication and erosion resistance of dense α-Si3N4/Sialon coating on porous Si3N4 ceramic
    Wang, Chao
    Qiao, Ruiqing
    Chen, Lijia
    RSC ADVANCES, 2016, 6 (68) : 63801 - 63808
  • [39] Mechanical properties of Si3N4 + β-Si3N4 whisker reinforced ceramics
    Dusza, J.
    Sajgalik, P.
    Journal of the European Ceramic Society, 1992, 9 (01) : 9 - 17
  • [40] Mechanical properties of Si3N4 ceramics from an in-situ synthesized a-Si3N4/β-Si3N4 composite powder
    Xing, Hongyu
    Liu, Bingqiang
    Sun, Jing
    Zou, Bin
    CERAMICS INTERNATIONAL, 2017, 43 (02) : 2150 - 2154
12345