A comparative study on tripod units for machine tools

被引：28
|
作者：
Xi, F [1 ]
Zhang, D
Xu, Z
Mechefske, CM
机构：
[1] Ryerson Univ, Dept Mech Aerosp & Ind Engn, Toronto, ON M5B 2K3, Canada
[2] Natl Res Council Canada, Integrated Mfg Technol Inst, London, ON N6G 4X8, Canada
[3] Univ Western Ontario, Dept Mech & Mat Engn, London, ON N6A 5B9, Canada
[4] Queens Univ, Dept Mech Engn, Kingston, ON K7L 3N6, Canada
来源：
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2003年 / 43卷 / 07期
关键词：
D O I：
10.1016/S0890-6955(03)00024-5
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Since most machining operations require a maximum of five axes, the tripod design is becoming popular for development of parallel kinematic machines. Combination of a tripod with a gantry system forms a five-axis machine with both large workspace and dexterity. In this paper, a comparative study is carried out on various tripod units proposed in the literature including Tricept, Z(3) Head, Georg V and Parawrist. For this purpose, a parametric model is developed that applies to a class of tripod units. Based on this model, four different types of tripods are compared, and their differences are analyzed. (C) 2003 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：721 / 730
页数：10
相关论文
共 50 条
  • [21] Comparative Study of DSL Tools
    Vasudevan, Naveneetha
    Tratt, Laurence
    ELECTRONIC NOTES IN THEORETICAL COMPUTER SCIENCE, 2011, 264 (05) : 103 - 121
  • [22] Classifier Tools: A Comparative Study
    Mirza, Heera Begum
    Ratnaparkhe, Varsha R.
    PROCEEDINGS OF THE 2018 SECOND INTERNATIONAL CONFERENCE ON INTELLIGENT COMPUTING AND CONTROL SYSTEMS (ICICCS), 2018, : 1543 - 1547
  • [23] Comparative analysis of tripod offshore structure
    Gucuyen, Engin
    Yigit, M. Ensar
    Erdem, R. Tugrul
    Gokkus, Umit
    GRADEVINAR, 2020, 72 (11): : 1021 - 1030
  • [24] Study on quality improvement of machine tools
    Fujishima, Makoto
    Mori, Masahiko
    Nishimura, Kimiyuki
    Ohno, Katsuhiko
    PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE IN THROUGH-LIFE ENGINEERING SERVICES, 2017, 59 : 156 - 159
  • [25] Study of sensing technologies for machine tools
    Fujishima, Makoto, III
    Ohno, Katsuhiko
    Nishikawa, Shizuo
    Nishimura, Kimiyuki
    Sakamoto, Masataka
    Kawai, Kengo
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2016, 14 : 71 - 75
  • [26] A toolbox for tripod machine design, simulation, and monitoring
    Bi, Z. M.
    Lang, S. Y. T.
    Orban, Peter E.
    Verner, Marcel
    PROCEEDINGS OF THE ASME COMPUTERS AND INFORMATION IN ENGINEERING DIVISION, 2005, : 115 - 122
  • [27] Measurement data acquisition and processing with microcomputer at the testing of partial units of machine tools
    Molnar, L.
    Terstyanszky, G.
    Meres es Automatika, 1991, 39 (03):
  • [28] AUTOMATING THE SELECTION OF THE PRINCIPAL DESIGN PARAMETERS FOR THE SPINDLE UNITS OF MACHINE-TOOLS
    LIZOGUB, VA
    SILAEV, SI
    SOVIET ENGINEERING RESEARCH, 1982, 2 (01): : 80 - 82
  • [29] A power management system for thermoelectric generators used on spindle units of machine tools
    Zeng, Qinghui
    Li, Sheng
    Yao, Xinhua
    Fu, Jianzhong
    MACHINE DESIGN AND MANUFACTURING ENGINEERING II, PTS 1 AND 2, 2013, 365-366 : 955 - 958
  • [30] HIGH-SPEED SPINDLE UNITS IN HEAVY MULTIPURPOSE MACHINE-TOOLS
    BOLOTNIKOV, MA
    SOVIET ENGINEERING RESEARCH, 1985, 5 (05): : 48 - 50
12345