X-ray line profile study on shot/laser-peened stainless steel

被引：6
|
作者：
Kumagai, Masayoshi [1 ]
Akita, Koichi [2 ]
Imafuku, Muneyuki [1 ]
Ohya, Shin-ichi [1 ]
机构：
[1] Tokyo City Univ, Dept Mech Syst Engn, Tokyo, Japan
[2] Japan Atom Energy Agcy, Quantum Beam Sci Directorate, Mikazuki, Hyogo 6795148, Japan
来源：
RESIDUAL STRESSES IX | 2014年 / 996卷
关键词：
Shot peening; Laser peening; X-ray diffraction; Line profile analysis; Dislocations; FATIGUE BEHAVIOR; GRAIN-SIZE; LASER; DIFFRACTION; DISLOCATIONS; SURFACE;
D O I：
10.4028/www.scientific.net/AMR.996.39
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Microstructure and residual stress in AISI316 stainless steels processed via shot peening (SP) and laser peening (LP) were evaluated using X-ray line profile analysis and residual stress measurements. Although both specimens exhibited similar compressive residual stress profiles in the depth direction, the dislocation density in the SP specimen was greater than that in the LP specimen, while the crystallite size in the SP specimen was less than that of the LP specimen. Thus, the variation in the microstructural features in the samples subjected to the two processes differed.
引用
收藏
页码：39 / +
页数：2
相关论文
共 50 条
  • [31] Determination of surface mechanical property and residual stress stability for shot-peened SAF2507 duplex stainless steel by in situ X-ray diffraction stress analysis
    Chen, Ming
    Xing, Shilong
    Liu, Huabing
    Jiang, Chuanhai
    Zhan, Ke
    Ji, Vincent
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (04): : 7644 - 7654
  • [32] AUTOMATIZED X-RAY LINE PROFILE ANALYSIS
    KELLER, H
    SEGMULLER, A
    REVIEW OF SCIENTIFIC INSTRUMENTS, 1963, 34 (06): : 684 - &
  • [33] Comparison Research on Mechanical Properties of Stainless Steel after Laser Peened and Ultrasonically Peened
    Wang, Cheng
    Lai, Zhilin
    Sun, Dong
    Zhou, Liucheng
    An, Zhibin
    MATERIAL DESIGN, PROCESSING AND APPLICATIONS, PARTS 1-4, 2013, 690-693 : 2107 - 2111
  • [34] Accuracy of X-ray diffraction measurement of residual stresses in shot peened titanium alloy samples
    Fu, Xuesong
    Niu, Zhiqiang
    Deng, Ying
    Zhang, Jie
    Liu, Chongyuan
    Chen, Guoqing
    Li, Zhiqiang
    Zhou, Wenlong
    NONDESTRUCTIVE TESTING AND EVALUATION, 2019, 34 (02) : 164 - 177
  • [35] Cross-sectional TEM and X-ray examination of radiation-induced stress relaxation of peened stainless steel surfaces
    Sencer, BH
    Was, GS
    Yuya, H
    Isobe, Y
    Sagisaka, M
    Garner, FA
    JOURNAL OF NUCLEAR MATERIALS, 2005, 336 (2-3) : 314 - 322
  • [36] Oxidation Resistance of Shot Peened Austenitic Stainless Steel Superheater Tubes in Steam
    Tossey, Brett M.
    Khan, Hassan
    Andress, Tom
    ADVANCES IN MATERIALS TECHNOLOGY FOR FOSSIL POWER PLANTS: PROCEEDINGS FROM THE EIGHTH INTERNATIONAL CONFERENCE, 2016, 2016, : 855 - 866
  • [37] In situ x-ray reflectivity study of oxidation kinetics in iron and stainless steel
    Kim, DH
    Kim, SS
    Lee, HH
    Jang, HW
    Kim, JW
    Tang, M
    Liang, KS
    Sinha, SK
    Noh, DY
    Neutron and X-Ray Scattering as Probes of Multiscale Phenomena, 2005, 840 : 97 - 104
  • [38] X-ray diffraction study of σ-phase formation in super duplex stainless steel
    Garin, Jorge
    Mannheim, Rodolfo
    Camus, Manuel
    ACTA CRYSTALLOGRAPHICA A-FOUNDATION AND ADVANCES, 2010, 66 : S182 - S182
  • [39] Oxidation kinetics in iron and stainless steel: An in situ X-ray reflectivity study
    Kim, DH
    Kim, SS
    Lee, HH
    Jang, HW
    Kim, JW
    Tang, M
    Liang, KS
    Sinha, SK
    Noh, DY
    JOURNAL OF PHYSICAL CHEMISTRY B, 2004, 108 (52): : 20213 - 20218
  • [40] Study of stacking faults in deformed austenitic stainless steel by x-ray diffraction
    Teng, Feng-En
    Yang, Benwei
    Wang, Yuming
    Metallurgical transactions. A, Physical metallurgy and materials science, 1992, 23 A (10): : 2859 - 2861
12345