X-ray line profile study on shot/laser-peened stainless steel

被引：6
|
作者：
Kumagai, Masayoshi [1 ]
Akita, Koichi [2 ]
Imafuku, Muneyuki [1 ]
Ohya, Shin-ichi [1 ]
机构：
[1] Tokyo City Univ, Dept Mech Syst Engn, Tokyo, Japan
[2] Japan Atom Energy Agcy, Quantum Beam Sci Directorate, Mikazuki, Hyogo 6795148, Japan
来源：
RESIDUAL STRESSES IX | 2014年 / 996卷
关键词：
Shot peening; Laser peening; X-ray diffraction; Line profile analysis; Dislocations; FATIGUE BEHAVIOR; GRAIN-SIZE; LASER; DIFFRACTION; DISLOCATIONS; SURFACE;
D O I：
10.4028/www.scientific.net/AMR.996.39
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Microstructure and residual stress in AISI316 stainless steels processed via shot peening (SP) and laser peening (LP) were evaluated using X-ray line profile analysis and residual stress measurements. Although both specimens exhibited similar compressive residual stress profiles in the depth direction, the dislocation density in the SP specimen was greater than that in the LP specimen, while the crystallite size in the SP specimen was less than that of the LP specimen. Thus, the variation in the microstructural features in the samples subjected to the two processes differed.
引用
收藏
页码：39 / +
页数：2
相关论文
共 50 条
  • [21] Depth profiles of macro residual stresses in thin shot peened steel plates determined by X-ray and neutron diffraction
    Menig, R
    Pintschovius, L
    Schulze, V
    Vöhringer, O
    SCRIPTA MATERIALIA, 2001, 45 (08) : 977 - 983
  • [22] X-ray stress measurement of stainless steel
    Zhang, Yi-Liang
    Liu, Jin-Yan
    Xu, Xue-Dong
    Beijing Gongye Daxue Xuebao/Journal of Beijing University of Technology, 2010, 36 (09): : 1165 - 1173
  • [23] Microstructure thermostability of shot peened duplex stainless steel surface layer
    Feng, Q.
    Jiang, C. H.
    Xu, Z.
    Wu, X. Y.
    SURFACE ENGINEERING, 2013, 29 (05) : 351 - 355
  • [24] Contact fatigue damage analysis of shot peened gears by means of X-ray measurements
    Fernandez-Pariente, Ines
    Guagliano, Mario
    ENGINEERING FAILURE ANALYSIS, 2009, 16 (03) : 964 - 971
  • [25] X-RAY LINE-BROADENING STUDIES ON AUSTENITIC STAINLESS-STEEL FILINGS
    NAIR, PK
    VASUDEVAN, R
    JOURNAL OF APPLIED CRYSTALLOGRAPHY, 1977, 10 (OCT1) : 401 - 404
  • [26] Microstructure of Gear Steels Treated by Shot Peening by X-Ray Line Profile Analysis Method
    Zhu, Pengfei
    Yan, Hongzhi
    Zhou, Jibo
    Zhou, Youliang
    Zhang, Yin
    Chen, Zhi
    METALS AND MATERIALS INTERNATIONAL, 2023, 29 (10) : 2926 - 2939
  • [27] Microstructure of Gear Steels Treated by Shot Peening by X-Ray Line Profile Analysis Method
    Pengfei Zhu
    Hongzhi Yan
    Jibo Zhou
    Youliang Zhou
    Yin Zhang
    Zhi Chen
    Metals and Materials International, 2023, 29 : 2926 - 2939
  • [28] High-energy synchrotron X-ray analysis of residual plastic strains induced in shot-peened steel plates
    Zhang, S. Y.
    Venter, A.
    Vorster, W. J. J.
    Korsunsky, A. M.
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2008, 43 (04): : 229 - 241
  • [29] High-energy X-ray synchrotron radiation analysis of residual-stress distribution of shot-peened steel
    Tanaka, K
    Akiniwa, Y
    Suzuki, K
    Yanase, E
    Nishio, K
    Kusumi, Y
    Arai, K
    ECRS 6: PROCEEDINGS OF THE 6TH EUROPEAN CONFERENCE ON RESIDUAL STRESSES, 2002, 404-7 : 341 - 346
  • [30] Evaluation of Microstructural Characteristics in Low-Cycle Fatigued Austenitic Stainless Steel Using X-Ray Line Profile Analysis
    Kumagai, Masayoshi
    Kuroda, Masatoshi
    Akita, Koichi
    Kamaya, Masayuki
    Ohya, Shin-ichi
    THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 : 376 - 381
12345