Fabrication of ultra-fine TiO2 ceramics by a high-frequency induction heated sintering method

被引：0
|
作者：
Kim, Hwan-Cheol [1 ]
Park, Hyun-Kuk [1 ]
Shon, In-Jin [1 ]
Ko, In-Yong [1 ]
机构：
[1] Chonbuk Natl Univ, Res Ctr Adv Mat Dev, Jeonju 560756, Jeonbuk, South Korea
来源：
JOURNAL OF CERAMIC PROCESSING RESEARCH | 2006年 / 7卷 / 04期
关键词：
rapid sintering; high-frequency induction heated sintering; TiO2; hardness; fracture toughness;
D O I：
暂无
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
High-frequency induction heated sintering (HFIHS) is utilized to consolidate ultra-fine rutile TiO2 ceramics. Densification to near theoretical density in a relatively short time can be accomplished using this method. Samples of TiO2 with a relative density of up to 98% and an average grain size of about 160 nm could be obtained by sintering at 830 degrees C for 5 minutes under a pressure of 100 MPa. The influence of sintering temperature and mechanical pressure on the final density and grain size of the sintered products was investigated. The sintered materials had fracture toughness and hardness values of 12.8 GPa and 3.1 MPa center dot ml(1/2), respectively.
引用
收藏
页码：327 / 331
页数：5
相关论文
共 50 条
  • [41] Mechanical wet-milling and subsequent consolidation of ultra-fine Al2O3-(ZrO2+3%Y2O3) bioceramics by using high-frequency induction heat sintering
    Khalil, Khalil Abdelrazek
    Kim, Sug Won
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2007, 17 (01) : 21 - 26
  • [42] Fabrication of Ultra-Fine Ag NPs on TiO2 Thin Films by Alcohol-Assisted Photodeposition Process for Photocatalysis-Related Applications
    Veziroglu, Salih
    MATERIALS, 2024, 17 (06)
  • [43] Effect of processing parameters on the mechanical and microstructural behavior of ultra-fine Al2O3-(ZrO2+8%Mol Y2O3) bioceramic, densified by high-frequency induction heat sintering
    Khalil, Khalil Abdelrazek
    Kim, Sug Won
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2006, 3 (04) : 322 - 330
  • [44] Simultaneous Synthesis and Consolidation of Nanostructured MoSi2-NbSi2 Composite by High-Frequency Induction Heated Sintering and Its Mechanical Properties
    Kang, Hyun-Su
    Shon, In-Jin
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2014, 24 (04): : 180 - 185
  • [45] Investigating the properties and microstructure of high-performance cement composites with nano-silica, silica fume, and ultra-fine TiO2
    Ashkan Saradar
    Yousof Rezakhani
    Komeil Rahmati
    Farzad Johari Majd
    Mohammad Mohtasham Moein
    Moses Karakouzian
    Innovative Infrastructure Solutions, 2024, 9
  • [46] Investigating the properties and microstructure of high-performance cement composites with nano-silica, silica fume, and ultra-fine TiO2
    Saradar, Ashkan
    Rezakhani, Yousof
    Rahmati, Komeil
    Johari Majd, Farzad
    Mohtasham Moein, Mohammad
    Karakouzian, Moses
    INNOVATIVE INFRASTRUCTURE SOLUTIONS, 2024, 9 (04)
  • [47] Characteristics of TiO2 Nanotubes Fabricated by High-Frequency Cyclic Anodization
    Wei, Fang
    Chen, Zhenhui
    Lin, Yue
    Qian, Qun
    Jiang, Hongyi
    Su, Penghao
    Liao, Dexiang
    Feng, Daolun
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2021, 168 (03)
  • [48] FAST LOW-TEMPERATURE CONSOLIDATION OF NANOCRYSTALLINE Fe-ZrO2 COMPOSITE BY HIGH-FREQUENCY INDUCTION-HEATED SINTERING
    Shon, In-Jin
    Kang, Hyun-Su
    Ko, In-Yong
    Yoon, Jin-Kook
    Doh, Jung-Mann
    REVIEWS ON ADVANCED MATERIALS SCIENCE, 2011, 28 (01) : 1 - 4
  • [49] Consolidation and mechanical properties of nanostructured MoSi2 from mechanically reacted powder by high-frequency induction-heated sintering
    Ko, In-Yong
    Park, Jeong-Hwan
    Yoon, Jin-Kook
    Doh, Jung-Mann
    Shon, In-Jin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 505 (02) : L31 - L34
  • [50] Electrodeposition of Hydroxyapatite Nanoparticles Onto Ultra-Fine TiO2 Nanotube Layer by Electrochemical Reaction in Mixed Electrolyte
    Park, Su-Jung
    Jang, Jae-Myung
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2011, 11 (08) : 7167 - 7171
12345