Enhanced tensile ductility through boundary structure engineering in ultrafine-grained aluminum

被引：28
|
作者：
Sun, P. L. [1 ]
Cerreta, E. K. [1 ]
Bingert, J. F. [1 ]
Gray, G. T., III [1 ]
Hundley, M. F. [1 ]
机构：
[1] Los Alamos Natl Lab, Los Alamos, NM 87545 USA
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2007年 / 464卷 / 1-2期
关键词：
ultratine-grained aluminum; boundary; mechanical properties;
D O I：
10.1016/j.msea.2007.02.007
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Commercial purity aluminum AA1050 billets with similar submicrometer grain sizes but distinctively different boundary structures were obtained by the use of different equal channel angular extrusion (ECAE) routes. Route "A'' is defined as no rotation between extrusion passes, while route "C" is rotated 180 degrees between extrusion passes. The microstructure processed by route "A" consists mainly of high-angle boundaries (HABS) while route "C" has primarily low-angle boundary (LAB) structures. Tensile tests conducted on these two microstructures at intermediate and dynamic strain rates at both 77 and 298 K were compared with the results of material tested at quasi-static strain rates. The boundary structure was found to play an important role in the mechanical properties at low temperature. (c) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：343 / 350
页数：8
相关论文
共 50 条
  • [41] Achieving synergy of high strength and ductility in ultrafine-grained aluminium through annealing and cryorolling
    Sadykov, D. I.
    Orlova, T. S.
    Lihachev, A. I.
    Kirilenko, D. A.
    MATERIALS LETTERS, 2025, 382
  • [42] LUDERS DEFORMATION IN ULTRAFINE-GRAINED PURE ALUMINUM
    WYRZYKOWSKI, JW
    GRABSKI, MW
    MATERIALS SCIENCE AND ENGINEERING, 1982, 56 (02): : 197 - 200
  • [43] Improving the tensile ductility and uniform elongation of high-strength ultrafine-grained Al alloys by lowering the grain boundary misorientation angle
    Hu, T.
    Ma, K.
    Topping, T. D.
    Saller, B.
    Yousefiani, A.
    Schoenung, J. M.
    Lavernia, E. J.
    SCRIPTA MATERIALIA, 2014, 78-79 : 25 - 28
  • [44] Factors influencing creep flow and ductility in ultrafine-grained metals
    Sklenicka, V.
    Dvorak, J.
    Kral, P.
    Svoboda, M.
    Kvapilova, M.
    Langdon, T. G.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 558 : 403 - 411
  • [45] High ductility of ultrafine-grained steel via phase transformation
    Department of Materials Science and Engineering, University of Tennessee, Knoxville, TN 37996, United States
    不详
    不详
    不详
    不详
    不详
    J Mater Res, 2008, 6 (1578-1586):
  • [46] High ductility of ultrafine-grained steel via phase transformation
    S. Cheng
    H. Choo
    Y.H. Zhao
    X-L. Wang
    Y.T. Zhu
    Y.D. Wang
    J. Almer
    P.K. Liaw
    J.E. Jin
    Y.K. Lee
    Journal of Materials Research, 2008, 23 : 1578 - 1586
  • [47] A critical examination of the paradox of strength and ductility in ultrafine-grained metals
    Tarang Mungole
    Praveen Kumar
    Megumi Kawasaki
    Terence G. Langdon
    Journal of Materials Research, 2014, 29 : 2534 - 2546
  • [48] A critical examination of the paradox of strength and ductility in ultrafine-grained metals
    Mungole, Tarang
    Kumar, Praveen
    Kawasaki, Megumi
    Langdon, Terence G.
    JOURNAL OF MATERIALS RESEARCH, 2014, 29 (21) : 2534 - 2546
  • [49] High ductility of ultrafine-grained steel via phase transformation
    Cheng, S.
    Choo, H.
    Zhao, Y. H.
    Wang, X-L.
    Zhu, Y. T.
    Wang, Y. D.
    Almer, J.
    Liaw, P. K.
    Jin, J. E.
    Lee, Y. K.
    JOURNAL OF MATERIALS RESEARCH, 2008, 23 (06) : 1578 - 1586
  • [50] The role of shear banding on the fatigue ductility of ultrafine-grained aluminium
    Malekjani, Shokoufeh
    Hodgson, Peter D.
    Stanford, Nicole E.
    Hilditch, Timothy B.
    SCRIPTA MATERIALIA, 2013, 68 (05) : 269 - 272
12345