Enhanced tensile ductility through boundary structure engineering in ultrafine-grained aluminum

被引：28
|
作者：
Sun, P. L. [1 ]
Cerreta, E. K. [1 ]
Bingert, J. F. [1 ]
Gray, G. T., III [1 ]
Hundley, M. F. [1 ]
机构：
[1] Los Alamos Natl Lab, Los Alamos, NM 87545 USA
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2007年 / 464卷 / 1-2期
关键词：
ultratine-grained aluminum; boundary; mechanical properties;
D O I：
10.1016/j.msea.2007.02.007
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Commercial purity aluminum AA1050 billets with similar submicrometer grain sizes but distinctively different boundary structures were obtained by the use of different equal channel angular extrusion (ECAE) routes. Route "A'' is defined as no rotation between extrusion passes, while route "C" is rotated 180 degrees between extrusion passes. The microstructure processed by route "A" consists mainly of high-angle boundaries (HABS) while route "C" has primarily low-angle boundary (LAB) structures. Tensile tests conducted on these two microstructures at intermediate and dynamic strain rates at both 77 and 298 K were compared with the results of material tested at quasi-static strain rates. The boundary structure was found to play an important role in the mechanical properties at low temperature. (c) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：343 / 350
页数：8
相关论文
共 50 条
  • [31] The Effect of Grain Boundary Sliding and Strain Rate Sensitivity on the Ductility of Ultrafine-Grained Materials
    Chinh, Nguyen Q.
    Csanadi, Tamas
    Gubicza, Jeno
    Valiev, Ruslan Z.
    Straumal, Boris B.
    Langdon, Terence G.
    NANOMATERIALS BY SEVERE PLASTIC DEFORMATION: NANOSPD5, PTS 1 AND 2, 2011, 667-669 : 677 - +
  • [32] Enhanced Thermal Stability And Mechanical Properties of Ultrafine-Grained Aluminum Alloy
    Islamgaliev, Rinat K.
    Nikitina, Marina A.
    Kamalov, Aidar F.
    NANOMATERIALS BY SEVERE PLASTIC DEFORMATION: NANOSPD5, PTS 1 AND 2, 2011, 667-669 : 331 - 336
  • [33] Enhanced Formability of Ultrafine-Grained Aluminum Blanks by Local Heat Treatments
    Merklein, M.
    Vogt, U.
    SHEET METAL 2009, 2009, 410-411 : 169 - 176
  • [34] Enhanced strength and ductility of bulk CoCrFeMnNi high entropy alloy having fully recrystallized ultrafine-grained structure
    Sun, S. J.
    Tian, Y. Z.
    Lin, H. R.
    Dong, X. G.
    Wang, Y. H.
    Zhang, Z. J.
    Zhang, Z. F.
    MATERIALS & DESIGN, 2017, 133 : 122 - 127
  • [35] Enhanced tensile ductility of an ultra-fine-grained aluminum alloy
    Sabirov, I.
    Estrin, Y.
    Barnett, M. R.
    Timokhina, I.
    Hodgson, P. D.
    SCRIPTA MATERIALIA, 2008, 58 (03) : 163 - 166
  • [36] Thickness-related synchronous increase in strength and ductility of ultrafine-grained pure aluminum sheets
    Yan, Ying
    Zhang, Guo-qiang
    Chen, Li-jia
    Li, Xiao-wu
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2019, 26 (11) : 1450 - 1456
  • [37] Effect of Hydrostatic Pressure on Defect Structure and Durability of Ultrafine-Grained Aluminum
    Betekhtin, V. I.
    Kadomtsev, A. G.
    Sklenicka, V.
    Narykova, M. V.
    TECHNICAL PHYSICS LETTERS, 2011, 37 (10) : 977 - 979
  • [38] Effect of hydrostatic pressure on defect structure and durability of ultrafine-grained aluminum
    V. I. Betekhtin
    A. G. Kadomtsev
    V. Sklenička
    M. V. Narykova
    Technical Physics Letters, 2011, 37 : 977 - 979
  • [39] Thickness-related synchronous increase in strength and ductility of ultrafine-grained pure aluminum sheets
    Ying Yan
    Guo-qiang Zhang
    Li-jia Chen
    Xiao-wu Li
    InternationalJournalofMineralsMetallurgyandMaterials, 2019, 26 (11) : 1450 - 1456
  • [40] Thickness-related synchronous increase in strength and ductility of ultrafine-grained pure aluminum sheets
    Ying Yan
    Guo-qiang Zhang
    Li-jia Chen
    Xiao-wu Li
    International Journal of Minerals, Metallurgy and Materials, 2019, 26 : 1450 - 1456
12345