The effect of crack insertion for FDM printed PLA materials on Mode I and Mode II fracture toughness

被引：31
|
作者：
Valean, Cristina [1 ]
Marsavina, Liviu [1 ]
Marghitas, Mihai [1 ]
Linul, Emanoil [1 ]
Razavi, Nima [2 ]
Berto, Filippo [2 ]
Brighenti, Roberto [3 ]
机构：
[1] Univ Politehn Timisoara, 1 Mihai Viteazu Ave, Timisoara 300222, Romania
[2] Norwegian Univ Sci & Technol NTNU, Richard Birkelands Vei 2b, N-7491 Trondheim, Norway
[3] Univ Parma, Viale Sci 181-A, I-43124 Parma, Italy
来源：
1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1 | 2020年 / 28卷
关键词：
Additive Manufacturing; Fused deposition modeling; PLA; mode I; mode II; fracture toughness;
D O I：
10.1016/j.prostr.2020.11.128
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
The paper presents mode I and II fracture toughness results for polylactic acid material obtained via fused deposition modeling. The tests were performed using Single Edge Notch Bend specimens loaded in four point bending: symmetric for mode I, asymmetric for mode II, respectively. The notch was inserted by 3D printing, and by milling, respectively. Fracture toughness values measured for the specimens with 3D printed notch resulted to be higher than those obtained by milling. The effect of notch insertion is more evident in mode I while it is less important for mode II. (C) 2020 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the European Structural Integrity Society (ESIS) ExCo
引用
收藏
页码：1134 / 1139
页数：6
相关论文
共 50 条
  • [41] Theoretical and experimental investigations on the mode II fracture toughness of brittle materials
    Sistaninia, Masoud
    Sistaninia, Mahjoubeh
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2015, 98 : 1 - 13
  • [42] A New Approach for Investigation of Mode II Fracture Toughness in Orthotropic Materials
    Fakoor, Mahdi
    Khansari, Nabi Mehri
    LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, 2018, 15 (03):
  • [43] Nesting effect on the mode II fracture toughness of woven laminates
    Olave, Mireia
    Vara, Igor
    Usabiaga, Hodei
    Aretxabaleta, Laurentzi
    Lomov, Stepan V.
    Vandepitte, Dirk
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2015, 74 : 174 - 181
  • [44] Determination of mode I fracture toughness of brittle materials with a new method
    Fu, Jinwei
    Haeri, Hadi
    Labuz, Joseph F.
    Sarfarazi, Vahab
    Ebneabbasi, Pouyan
    Aliha, M. R. M.
    Karimi, Hamid Reza
    Jahanmiri, Shirin
    Marji, Mohammad Fatehi
    ACTA MECHANICA SINICA, 2024, 40 (02)
  • [45] Effect of specimen thickness on mode II fracture toughness of rock
    Rao, Q.-H.
    Sun, Z.-Q.
    Wang, G.-Y.
    Xu, J.-C.
    Zhang, J.-Y.
    Journal of Central South University of Technology (English Edition), 2001, 8 (02): : 114 - 119
  • [46] Effect of specimen thickness on Mode II fracture toughness of rock
    Qiu-hua Rao
    Zong-qi Sun
    Gui-yao Wang
    Ji-cheng Xu
    Jing-yi Zhang
    Journal of Central South University of Technology, 2001, 8 : 114 - 119
  • [47] Effect of specimen thickness on Mode II fracture toughness of rock
    Rao, QH
    Sun, ZQ
    Wang, GY
    Xu, JC
    Zhang, JY
    JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, 2001, 8 (02): : 114 - 119
  • [48] Effect of size and anisotropy on mode I fracture toughness of coal
    Sun, Zhuang
    Zhao, Yixin
    Gao, Yirui
    Gao, Sen
    Elmo, Davide
    Wei, Xindong
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2024, 129
  • [49] Effect of Fiber Orientation on Mode I Fracture Toughness of CFRP
    Miyagawa, Hiroaki
    Sato, Chiaki
    Ikegami, Kozo
    JOURNAL OF APPLIED POLYMER SCIENCE, 2010, 115 (06) : 3295 - 3302
  • [50] Nesting effect on the mode I fracture toughness of woven laminates
    Olave, Mireia
    Vara, Igor
    Husabiaga, Hodei
    Aretxabaleta, Laurentzi
    Lomov, Stepan V.
    Vandepitte, Dirk
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2015, 74 : 166 - 173
12345