Sintering optimisation and solution annealing of high nitrogen nickel free austenitic stainless steels prepared by PIM

被引：11
|
作者：
Cui, D. W. [1 ,2 ]
Qu, X. H. [2 ]
Guo, P. [1 ]
Li, K. [2 ]
机构：
[1] Weifang Univ, Dept Machinery, Weifang 261061, Peoples R China
[2] Univ Sci & Technol Beijing, Sch Mat Sci & Engn, Beijing 100083, Peoples R China
来源：
POWDER METALLURGY | 2010年 / 53卷 / 01期
基金：
中国国家自然科学基金;
关键词：
High nitrogen nickel free; Austenitic stainless steel; Sintering optimisation; Solution annealing; CORROSION;
D O I：
10.1179/174329008X284930
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The effects of various sintering parameters (temperature, time and nitrogen pressure) on the density, nitrogen content and the mechanical properties of high nitrogen nickel free austenitic stainless steel (0Cr-17Mn-11Mo-3N) prepared by powder injection moulding were investigated, and the influence of solution annealing on the microstructure and mechanical properties was also discussed. The results show that the optimal sintering conditions are as follows: sintering temperature 1300 degrees C, sintering time 2 h and nitrogen pressure 0.1 MPa, under which a favourable combination of the relative density of 99.1% and the nitrogen content of 0.78 wt-% can be obtained. After solution annealing at 1150 degrees C for 90 min, the yield strength and ultimate tensile strength can reach 580 and 885 MPa respectively, which are about 2.9 and 1.7 times greater than those of 316L Metal Injection Molding (MIM) stainless steel. Before solution annealing, the sintered specimens mainly consist of gamma-austenite, alpha-ferrite and network of Cr2N phase, while after solution annealing, they reveals a fully austenitic structure without any intergranular nitrides.
引用
收藏
页码：91 / 95
页数：5
相关论文
共 50 条
  • [31] Nickel-free austenitic stainless steels for medical applications
    Yang, Ke
    Ren, Yibin
    SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2010, 11 (01)
  • [32] Influence of thermal and mechanical processing on room temperature mechanical properties of nickel free high nitrogen austenitic stainless steels
    Balachandran, G
    Bhatia, ML
    Ballal, NB
    Rao, PK
    ISIJ INTERNATIONAL, 2000, 40 (05) : 501 - 510
  • [33] In vitro biocompatibility of a new high nitrogen nickel free austenitic stainless steel
    Ren, Yibin
    Yang, Huajuan
    Yang, Ke
    Zhang, Bingchun
    ASBM7: ADVANCED BIOMATERIALS VII, 2007, 342-343 : 605 - +
  • [34] On the strengthening mechanisms of high nitrogen austenitic stainless steels
    Odnobokova, M. V.
    Belyakov, A. N.
    Dolzhenko, P. D.
    Kostina, M. V.
    Kaibyshev, R. O.
    MATERIALS LETTERS, 2023, 331
  • [35] New high-nitrogen austenitic stainless steels
    Bernauer, JN
    Saller, G
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2002, 55 (04): : 193 - 199
  • [36] Effect of nitrogen content on precipitation during isothermal annealing of P/M high nitrogen austenitic stainless steels
    Romu, J.
    Hänninen, H.
    Materials Science Forum, 1999, 318 : 673 - 680
  • [37] Effect of nitrogen content on precipitation during isothermal annealing of P/M high nitrogen austenitic stainless steels
    Romu, J
    Hänninen, H
    HIGH NITROGEN STEELS '98, 1999, 318-3 : 673 - 680
  • [38] Development of nitrogen-containing nickel-free austenitic stainless steels for metallic biomaterials - Review
    Sumita, M
    Hanawa, T
    Teoh, SH
    MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, 2004, 24 (6-8): : 753 - 760
  • [39] Metal injection moulding of nickel-free austenitic stainless steels
    Bahre, WF
    Uggowitzer, PJ
    Speidel, MO
    COMPETITIVE ADVANTAGES BY NEAR-NET SHAPE MANUFACTURING, 1997, : 239 - 246
  • [40] Impact toughness properties of nickel-free austenitic stainless steels
    Mitititsky, M.
    Matlock, D. K.
    Regully, A.
    Dewispelaere, N.
    Penning, J.
    Hanninen, H.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 496 (1-2): : 189 - 199
12345