Fabrication of a widely tunable fiber Bragg grating filter using fused deposition modeling 3D printing

被引：7

作者：

Liu, Chunxin ^{[1
]}

Yang, Xiong ^{[1
,2
]}

Laurell, Fredrik ^{[1
]}

Fokine, Michael ^{[1
]}

机构：

[1] KTH Royal Inst Technol, Dept Appl Phys, S-10691 Stockholm, Sweden

[2] Zhejiang Univ, COER, State Key Lab Modern Opt Instrumentat, Hangzhou 310058, Zhejiang, Peoples R China

来源：

OPTICAL MATERIALS EXPRESS | 2019年 / 9卷 / 11期

关键词：

3-D printing - Bragg wavelength - Fused deposition modeling (FDM) - Polyethylene terephthalate glycols - Wavelength-tunable devices - Widely tunable;

D O I：

10.1364/OME.9.004409

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The use of 3D-printing for designing a simple wavelength tunable device based on fiber Bragg gratings is demonstrated. Using fused deposition modeling (FDM), the fiber Bragg grating is embedded into a beam of polyethylene terephthalate glycol (PETG). Through bending, resulting in compression or tension of the optical fiber, the Bragg wavelength could be continuously tuned over a range of 60 nm, with maintained reflectivity and 3-dB linewidth. (C) 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

引用

页码：4409 / 4417

页数：9

共 50 条

[31] Use of Biomaterials for 3D Printing by Fused Deposition Modeling Technique: A Review
Wasti, Sanjita
Adhikari, Sushil
FRONTIERS IN CHEMISTRY, 2020, 8
[32] Quality considerations on the pharmaceutical applications of fused deposition modeling 3D printing
Melocchi, Alice
Briatico-Vangosa, Francesco
Uboldi, Marco
Parietti, Federico
Turchi, Maximilian
von Zeppelin, Didier
Maroni, Alessandra
Zema, Lucia
Gazzaniga, Andrea
Zidan, Ahmed
INTERNATIONAL JOURNAL OF PHARMACEUTICS, 2021, 592
[33] Application of Thermoplastic Elastomer for 3D Printing by Fused Deposition Modeling(FDM)
M. V. Timoshenko
S. V. Balabanov
M. M. Sychev
D. I. Nikiforov
Glass Physics and Chemistry, 2021, 47 : 502 - 504
[34] Characterization of Thermal Expansion Coefficient of 3D Printing Polymeric Materials Using Fiber Bragg Grating Sensors
Matsika-Klossa, Constantina
Chatzidai, Nikoleta
Kousiatza, Charoula
Karalekas, Dimitrios
MATERIALS, 2024, 17 (18)
[35] Fabrication of Composite Filaments with High Dielectric Permittivity for Fused Deposition 3D Printing
Wu, Yingwei
Isakov, Dmitry
Grant, Patrick S.
MATERIALS, 2017, 10 (10):
[36] Fabrication of all-fiber bandpass filter using single fiber Bragg grating
Wei, ZX
Qin, L
Wang, QY
Li, HP
Zheng, W
Zhang, YS
OPTICS COMMUNICATIONS, 2000, 177 (1-6) : 201 - 205
[37] Simultaneous interrogation of fiber Bragg grating sensors using an acoustooptic tunable filter
Boulet, C
Webb, DJ
Douay, M
Niay, P
IEEE PHOTONICS TECHNOLOGY LETTERS, 2001, 13 (11) : 1215 - 1217
[38] Fabrication of Flexible and Transferable RTDs via Fused Deposition Modelling 3D Printing
Tan, Deck Khong
Nokhodchi, Ali
Munzenrieder, Niko
PROCEEDINGS OF THE 2021 IEEE INTERNATIONAL CONFERENCE ON FLEXIBLE AND PRINTABLE SENSORS AND SYSTEMS (FLEPS), 2021,
[39] Tunable wavelength filter using a Bragg grating fiber thinned by plasma etching
Kumazaki, H
Yamada, Y
Nakamura, H
Inaba, S
Hane, K
IEEE PHOTONICS TECHNOLOGY LETTERS, 2001, 13 (11) : 1206 - 1208
[40] Multiplexed fiber Bragg grating sensor using tunable FBG filter technique
Liu, Yunqi
Liu, Zhiguo
Guo, Zhuanyun
Dong, Xiaoyi
Guangxue Xuebao/Acta Optica Sinica, 2000, 20 (08): : 1084 - 1088

← 1 2 3 4 5 →