Fabrication of a widely tunable fiber Bragg grating filter using fused deposition modeling 3D printing

被引：7
|
作者：
Liu, Chunxin [1 ]
Yang, Xiong [1 ,2 ]
Laurell, Fredrik [1 ]
Fokine, Michael [1 ]
机构：
[1] KTH Royal Inst Technol, Dept Appl Phys, S-10691 Stockholm, Sweden
[2] Zhejiang Univ, COER, State Key Lab Modern Opt Instrumentat, Hangzhou 310058, Zhejiang, Peoples R China
来源：
OPTICAL MATERIALS EXPRESS | 2019年 / 9卷 / 11期
关键词：
3-D printing - Bragg wavelength - Fused deposition modeling (FDM) - Polyethylene terephthalate glycols - Wavelength-tunable devices - Widely tunable;
D O I：
10.1364/OME.9.004409
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The use of 3D-printing for designing a simple wavelength tunable device based on fiber Bragg gratings is demonstrated. Using fused deposition modeling (FDM), the fiber Bragg grating is embedded into a beam of polyethylene terephthalate glycol (PETG). Through bending, resulting in compression or tension of the optical fiber, the Bragg wavelength could be continuously tuned over a range of 60 nm, with maintained reflectivity and 3-dB linewidth. (C) 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
引用
收藏
页码：4409 / 4417
页数：9
相关论文
共 50 条
  • [21] Determination of Material Requirements for 3D Gel Food Printing Using a Fused Deposition Modeling 3D Printer
    In, Jiwon
    Jeong, Haeun
    Song, Sanghoon
    Min, Sea C.
    FOODS, 2021, 10 (10)
  • [22] Innovative functionalized monofilaments for 3D printing using fused deposition modeling for the toy industry
    Leon-Cabezas, M. A.
    Martinez-Garcia, A.
    Varela-Gandia, F. J.
    MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2017 (MESIC 2017), 2017, 13 : 738 - 745
  • [23] Fused Deposition Modeling 3D Printing Fault Diagnosis using Temporal Convolutional Network
    Sampedro, Gabriel Avelino
    Agron, Dannielle Jaye
    Kim, Ryanne Gail
    Kim, Dong-Seong
    Lee, Jae-Min
    2021 1ST INTERNATIONAL CONFERENCE IN INFORMATION AND COMPUTING RESEARCH (ICORE 2021), 2021, : 62 - 71
  • [24] Material requirements for printing cookie dough using a fused deposition modeling 3D printer
    Jiwon In
    Haeun Jeong
    Sea Cheol Min
    Food Science and Biotechnology, 2022, 31 : 807 - 817
  • [25] Dual extruder 3D printer printing process using fused deposition modeling (FDM)
    Molina-Salazar, Javier
    Ramos-Lozano, Secundino
    Rodriguez-Medina, Manuel-Arnoldo
    Poblano-Ojinaga, Eduardo-Rafael
    DYNA, 2022, 97 (03): : 230 - 230
  • [26] Material requirements for printing cookie dough using a fused deposition modeling 3D printer
    In, Jiwon
    Jeong, Haeun
    Min, Sea Cheol
    FOOD SCIENCE AND BIOTECHNOLOGY, 2022, 31 (07) : 807 - 817
  • [27] Fabrication and Properties of Wood-Polylactic Acid Composite Filaments for Fused Deposition Modeling 3D Printing
    Lin, Po-Heng
    Ho, Chen-Lung
    Lin, Cheng-Jung
    Tu, San-Hsien
    Taiwan Journal of Forest Science, 2022, 37 (03): : 167 - 178
  • [28] 3D Printing of Polypropylene Using the Fused Filament Fabrication Technique
    Silva, A. F.
    Carneiro, O. S.
    Gomes, R.
    PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017), 2017, 1896
  • [29] Application of Thermoplastic Elastomer for 3D Printing by Fused Deposition Modeling(FDM)
    Timoshenko, M., V
    Balabanov, S., V
    Sychev, M. M.
    Nikiforov, D., I
    GLASS PHYSICS AND CHEMISTRY, 2021, 47 (05) : 502 - 504
  • [30] 3D Printing of Low Melting Temperature Alloys by Fused Deposition Modeling
    Hsieh, P. C.
    Tsai, C. H.
    Liul, B. H.
    Wei, W. C. J.
    Wang, A. B.
    Luo, R. C.
    PROCEEDINGS 2016 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY (ICIT), 2016, : 1138 - 1142
12345