Effect of preaging on precipitation hardening in Al-Si-Mg alloys

被引：0
|
作者：
Tan, YH [1 ]
Lee, SL [1 ]
Wang, PS [1 ]
机构：
[1] Natl Cent Univ, Dept Mech Engn, Chungli 32054, Taiwan
来源：
THERMEC '97 - INTERNATIONAL CONFERENCE ON THERMOMECHANICAL PROCESSING OF STEELS AND OTHER MATERIALS, VOLS I-II | 1997年
关键词：
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The effect of various water quenching temperature and duration time of precipitation hardened Al-7Si-0.65Mg cast alloy is investigated by differential scanning calorimeter, electrical onductivity, hardness and tensile properties measurements. The results shows a positive response to 95 degrees C water quenched from solid solution treatment. The largest hardened rate can be obtained at 95 degrees C water-quenching for 60 minutes duration time in natural aging. The tensile strength and hardness following 95 degrees C quenched is found to be higher than that 25 degrees C and 60 degrees C water quenched in the shorter artificial aging time. High temperature water-quenching parameters available to high temperature(>180 degrees C) artificial aging treatment with the shorter aging time.
引用
收藏
页码：959 / 964
页数：6
相关论文
共 50 条
  • [1] Effect of pre-aging on precipitation hardening in Al-Si-Mg alloys
    Lee, SL
    Tan, YH
    Yie, SN
    Lin, JC
    SCANDINAVIAN JOURNAL OF METALLURGY, 1998, 27 (03) : 112 - 115
  • [2] EFFECT OF AGING CONDITIONS ON PRECIPITATION HARDENING IN Al-Si-Mg AND Al-Si-Cu-Mg ALLOYS
    Ibrahim, Mohamed F.
    Samuel, Agnes M.
    Samuel, Fawzy H.
    Doty, Herbert W.
    INTERNATIONAL JOURNAL OF METALCASTING, 2017, 11 (02) : 274 - 286
  • [3] Natural ageing effect on the bake hardening response in Al-Si-Mg alloys
    Zhuang, L
    Janse, JE
    De Smet, P
    Chen, JH
    Zandbergen, HW
    ALUMINUM 2001: PROCEEDINGS OF THE TMS 2001 ANNUAL MEETING ALUMINUM AUTOMOTIVE AND JOINING SYMPOSIA, 2001, : 77 - 91
  • [4] The effect of melt thermal-rate treatment on precipitation hardening and mechanical properties of Al-Si-Mg alloys
    Lee, Sang-Ik
    Kayani, Saif Haider
    Lee, Yoon-Ho
    Kim, Byung-Joo
    Euh, Kwangjun
    Lee, Je-In
    Cho, Young-Hee
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 33 : 2704 - 2717
  • [5] Improvement in bake hardening response of Al-Si-Mg alloys
    Zhuang, L
    de Haan, R
    Bottema, J
    Lahaye, CTW
    De Smet, P
    ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 2000, 331-3 : 1309 - 1314
  • [6] On the strain hardening behaviour of Al-Si-Mg casting alloys
    Wang, QG
    Caceres, CH
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 234 : 106 - 109
  • [7] Effect of Aging Conditions on Precipitation Hardening in Al–Si–Mg and Al–Si–Cu–Mg Alloys
    Mohamed F. Ibrahim
    Agnes M. Samuel
    Herbert W. Doty
    Fawzy H. Samuel
    International Journal of Metalcasting, 2017, 11 : 274 - 286
  • [8] Analyzing Si precipitation on age hardening of an Al-Si-Mg cast alloy
    Wang, Guiqing
    Liu, Yan
    Ren, Guocheng
    Zhao, Zhongkui
    ADVANCES IN SUPERALLOYS, PTS 1 AND 2, 2011, 146-147 : 1685 - 1689
  • [9] Solidification and precipitation behaviour of Al-Si-Mg casting alloys
    Wang, QG
    Davidson, CJ
    JOURNAL OF MATERIALS SCIENCE, 2001, 36 (03) : 739 - 750
  • [10] Solidification and precipitation behaviour of Al-Si-Mg casting alloys
    Q. G. Wang
    C. J. Davidson
    Journal of Materials Science, 2001, 36 : 739 - 750
12345