Physical and Mechanical Properties of Kenaf Stems at Varying Moisture Contents

被引：9
|
作者：
Dauda, S. M. [1 ]
Ahmad, D. [1 ]
Khalina, A. [1 ]
Jamarei, O. [1 ]
机构：
[1] Univ Putra Malaysia, Dept Biol & Agr Engn, Fac Engn, Upm Serdang 43400, Selangor, Malaysia
来源：
2ND INTERNATIONAL CONFERENCE ON AGRICULTURAL AND FOOD ENGINEERING (CAFE 2014) - NEW TRENDS FORWARD | 2014年 / 2卷
关键词：
cutting energy; cutting force; kenaf stems; moisture content; HIBISCUS-CANNABINUS L; ALFALFA STEMS; CARBON;
D O I：
10.1016/j.aaspro.2014.11.051
中图分类号：
S [农业科学];
学科分类号：
09 ;
摘要：
Physical and mechanical properties of kenaf stem Malaysian variety V 36 were studied. The physical properties revealed maximum plant height was 310 cm and the lowest was 150 cm. Maximum stem diameter was 30 mm and the smallest was 14 mm. The mechanical properties revealed the maximum cutting force and shearing energy were 1584.55 N and 8.75 J, respectively for 35% moisture content. While 694.86 N and 3.50 J were recorded for 72% moisture content. The Young's modulus ranged between 67.59 MPa to 234.24 MPa. The greater shearing energy was obtained at the lower levels in the stem. (C) 2014 The Authors. Published by Elsevier B.V.
引用
收藏
页码：370 / 374
页数：5
相关论文
共 50 条
  • [31] Physicochemical, mechanical and thermal properties of brown rice grain with various moisture contents
    Cao, W
    Nishiyama, Y
    Koide, S
    INTERNATIONAL JOURNAL OF FOOD SCIENCE AND TECHNOLOGY, 2004, 39 (09): : 899 - 906
  • [32] The effect of different moisture contents on different mechanical properties of selected wood species
    Voros, Agnes
    Nemeth, Robert
    9TH HARDWOOD PROCEEDINGS, VOL 9 - PT I: AN UNDERUTILIZED RESOURCE: HARDWOOD ORIENTED RESEARCH, 2020, : 299 - 304
  • [33] Physical properties of MWL of kenaf core and kenaf cores treated with AP and AS
    Yan, Dongbo
    Yang, Shuhui
    Li, Yousen
    Chung-kuo Tsao Chih/China Pulp and Paper, 1999, 18 (01): : 31 - 35
  • [34] Physical, mechanical and biodegradable properties of kenaf/coir hybrid fiber reinforced polymer nanocomposites
    Islam, Md. Saiful
    Hasbullah, Nur Atiqah Binti
    Hasan, Mahbub
    Talib, Zainal Abidin
    Jawaid, M.
    Haafiz, M. K. Mohamad
    MATERIALS TODAY COMMUNICATIONS, 2015, 4 : 69 - 76
  • [35] Effect of moisture content on the physical and mechanical properties of quinoa seeds
    Jan, Khan Nadiya
    Panesar, Paramjit S.
    Singh, Sukhcharn
    INTERNATIONAL AGROPHYSICS, 2019, 33 (01) : 41 - 48
  • [36] Effect of Moisture Content on Sunflower Seed Physical and Mechanical Properties
    Ali, Khaled Abdeen Mousa
    Zong, Wangyuan
    Yang, Lin
    Abd El-Ghany, Horia Mohamed
    INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH IN AFRICA, 2021, 57 : 169 - 179
  • [37] Influence of Moisture on Physical in Mechanical Properties of Pouteria Pachycarpa Wood
    Arroyo, Felipe Nascimento
    Fraga, Iuri Fazolin
    Zanini Ribeiro Soares, Larissa Soriani
    de Moura Aquino, Vinicius Borges
    Ruthes, Heloiza Candeia
    Resende Mascarenhas, Fernando Junior
    dos Santos, Herisson Ferreira
    Christoforo, Andre Luis
    Rocco Lahr, Francisco Antonio
    FLORESTA E AMBIENTE, 2022, 29 (02):
  • [38] Physical and mechanical properties of wheat straw as influenced by moisture content
    Tavakoli, H.
    Mohtasebi, S. S.
    Jafari, A.
    INTERNATIONAL AGROPHYSICS, 2009, 23 (02) : 175 - 181
  • [39] Investigation on the Effect of Beating on the Physical and Mechanical Properties of Untreated Kenaf Based Insulation Paper
    Umair, Muhammad
    Azis, Norhafiz
    Halis, Rasmina
    Jasni, Jasronita
    2018 IEEE 5TH INTERNATIONAL CONFERENCE ON SMART INSTRUMENTATION, MEASUREMENT AND APPLICATION (ICSIMA), 2018,
  • [40] Evaluation of physical, mechanical, and thermal properties of woven kenaf/bio-epoxy composites
    Abare, Alhassan Yakubu
    Jawaid, Mohammad
    Hamid, Norul Hisham
    Bakar, Balkis Fatomer A.
    Ismail, Ahmad Safwan
    Sarmin, Siti Noorbaini
    Fouad, Hassan
    Midani, Mohamad
    JOURNAL OF INDUSTRIAL TEXTILES, 2023, 53
12345