Physical and Mechanical Properties of Kenaf Stems at Varying Moisture Contents

被引：9
|
作者：
Dauda, S. M. [1 ]
Ahmad, D. [1 ]
Khalina, A. [1 ]
Jamarei, O. [1 ]
机构：
[1] Univ Putra Malaysia, Dept Biol & Agr Engn, Fac Engn, Upm Serdang 43400, Selangor, Malaysia
来源：
2ND INTERNATIONAL CONFERENCE ON AGRICULTURAL AND FOOD ENGINEERING (CAFE 2014) - NEW TRENDS FORWARD | 2014年 / 2卷
关键词：
cutting energy; cutting force; kenaf stems; moisture content; HIBISCUS-CANNABINUS L; ALFALFA STEMS; CARBON;
D O I：
10.1016/j.aaspro.2014.11.051
中图分类号：
S [农业科学];
学科分类号：
09 ;
摘要：
Physical and mechanical properties of kenaf stem Malaysian variety V 36 were studied. The physical properties revealed maximum plant height was 310 cm and the lowest was 150 cm. Maximum stem diameter was 30 mm and the smallest was 14 mm. The mechanical properties revealed the maximum cutting force and shearing energy were 1584.55 N and 8.75 J, respectively for 35% moisture content. While 694.86 N and 3.50 J were recorded for 72% moisture content. The Young's modulus ranged between 67.59 MPa to 234.24 MPa. The greater shearing energy was obtained at the lower levels in the stem. (C) 2014 The Authors. Published by Elsevier B.V.
引用
收藏
页码：370 / 374
页数：5
相关论文
共 50 条
  • [21] Physical and mechanical properties of wood after moisture conditioning
    Ishimaru, Y
    Arai, K
    Mizutani, M
    Oshima, K
    Iida, I
    JOURNAL OF WOOD SCIENCE, 2001, 47 (03) : 185 - 191
  • [22] Physical and mechanical properties of wood after moisture conditioning
    Yutaka Ishimaru
    Kazutoshi Arai
    Masato Mizutani
    Katsuhito Oshima
    Ikuho Iida
    Journal of Wood Science, 2001, 47 : 185 - 191
  • [23] Effect of Moisture Contents on Physical-Mechanical Properties of Lavandin (Lavandula X Intermedia Emeric Ex Loisel.)
    Yilmaz, Deniz
    Gokduman, Mehmet Emin
    JOURNAL OF ESSENTIAL OIL BEARING PLANTS, 2014, 17 (06) : 1224 - 1232
  • [24] Flow properties of DDGS with varying soluble and moisture contents using jenike shear testing
    Ganesan, V.
    Muthukumarappan, K.
    Rosentrater, K. A.
    POWDER TECHNOLOGY, 2008, 187 (02) : 130 - 137
  • [25] Moisture Susceptibility of Superpave Mixtures with Varying Binder Contents
    Uppu, Kiran Kumar
    Hossain, M.
    Ingram, Lon S.
    Kreider, Rick
    AIRFIELD AND HIGHWAY PAVEMENTS 2015: INNOVATIVE AND COST-EFFECTIVE PAVEMENTS FOR A SUSTAINABLE FUTURE, 2015, : 86 - 96
  • [26] Effects of Different Moisture Contents on Physical Properties of PVA-Gelatin Films
    Bergo, P.
    Moraes, I. C. F.
    Sobral, P. J. A.
    FOOD BIOPHYSICS, 2012, 7 (04) : 354 - 361
  • [27] Effects of Different Moisture Contents on Physical Properties of PVA-Gelatin Films
    P. Bergo
    I. C. F. Moraes
    P. J. A. Sobral
    Food Biophysics, 2012, 7 : 354 - 361
  • [28] Development of a model to estimate moisture contents based on physical properties and capacitance of seeds
    Besharati, Bahram
    Lak, Arezou
    Ghaffari, Hossein
    Karimi, Hadi
    Fattahzadeh, Mohadeseh
    SENSORS AND ACTUATORS A-PHYSICAL, 2021, 318
  • [29] Some Physical Properties of Cotton Seed ('Varamin' Cultivar) at Different Moisture Contents
    Asadzadeh, A. H.
    INTERNATIONAL CONFERENCE ON AGRICULTURAL ENGINEERING: NEW TECHNOLOGIES FOR SUSTAINABLE AGRICULTURAL PRODUCTION AND FOOD SECURITY, 2014, 1054 : 205 - 213
  • [30] Mechanical Properties of Cashew Nut Under Compression Loading at Varied Moisture Contents
    Swami S.B.
    Thakor N.S.J.
    Gawai A.M.
    Swami, Shrikant Baslingappa (swami_shrikant1975@yahoo.co.in), 2018, Springer (07) : 347 - 359
12345