Effect of C, N, Mn and Mo on the Ms and Md temperatures in high-purity Fe-18%Cr-10%Ni stainless steels

被引：0

作者：

Tanino, M ^{[1
]}

Liu, CM ^{[1
]}

Tsuchiya, A ^{[1
]}

Matsuo, T ^{[1
]}

机构：

[1] Tohoku Univ, Inst Mat Res, Aoba Ku, Sendai, Miyagi 98077, Japan

来源：

THERMEC '97 - INTERNATIONAL CONFERENCE ON THERMOMECHANICAL PROCESSING OF STEELS AND OTHER MATERIALS, VOLS I-II | 1997年

关键词：

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Effects of interstitial elements C and N as well as substitutional elements Mn and Mo on the Ms and Md30 temperatures in high purity 18mass%Cr-10mass%Ni metastable austenitic stainless steels were studied by means of magnetic measurement, and modified coefficients for these elements for calculating the Ms and Md30 temperatures were proposed. It is suggested that the constants in the modified equations should be increased by about 20 degrees C for high purity austenitic stainless steels. This may be mainly caused by the decrease in impurity elements such as O, S, P etc. which are not included in the equations.

引用

页码：195 / 201

页数：7

共 50 条

[41] Corrosion behavior in high heat input welded heat-affected zone of Ni-free high-nitrogen Fe-18Cr-10Mn-N austenitic stainless steel
Moon, Joonoh
Ha, Heon-Young
Lee, Tae-Ho
MATERIALS CHARACTERIZATION, 2013, 82 : 113 - 119
[42] Ductile-to-Brittle Transition Behavior of High-Nitrogen 18Cr-10Mn-0.35N Austenitic Steels Containing Ni and Cu
Hwang, Byoungchul
Lee, Tae-Ho
Park, Seong-Jun
Oh, Chang-Seok
Kim, Sung-Joon
PRICM 7, PTS 1-3, 2010, 654-656 : 158 - 161
[43] Precipitates in an isothermally aged Fe-18Cr-12Mn-0.04C-0.48N high-nitrogen austenitic stainless steel
Shi Feng
Wang Lijun
Cui Wenfang
Ren Yaping
Li Hongxiao
Liu Chunming
RARE METALS, 2007, 26 : 185 - 190
[44] Significance of Partial Substitution of Carbon by Nitrogen on Strengthening and Toughening Mechanisms of High Nitrogen Fe-15Cr-1Mo-C-N Martensitic Stainless Steels
Feng, Hao
Li, Hua-Bing
Jiao, Wei-Chao
Jiang, Zhou-Hua
Cai, Ming-Hui
Zhu, Hong-Chun
Chen, Zhi-Gang
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50A (11): : 4987 - 4999
[45] ROLE OF NIOBIUM AND MOLYBDENUM ON HIGH TEMPERATURE PROPERTIES OF 20 PERCENT CR-10 PERCENT MN-6 PERCENT NI-0.6 PERCENT N TYPE AUSTENITIC STEELS AND GRAIN BOUNDARY REACTION
YOSHIDA, H
KOIKE, K
YODA, R
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1971, 11 (02) : 76 - &
[46] Significance of Partial Substitution of Carbon by Nitrogen on Strengthening and Toughening Mechanisms of High Nitrogen Fe-15Cr-1Mo-C-N Martensitic Stainless Steels
Hao Feng
Hua-Bing Li
Wei-Chao Jiao
Zhou-Hua Jiang
Ming-Hui Cai
Hong-Chun Zhu
Zhi-Gang Chen
Metallurgical and Materials Transactions A, 2019, 50 : 4987 - 4999
[47] Effect of Grain Size on Ductile-Brittle Transition Behavior of Austenitic Fe-18Cr-10Mn-N-C Alloys
Lee, Sang-In
Lee, Seung-Yong
Nam, Seung Hoon
Hwang, Byoungchul
KOREAN JOURNAL OF MATERIALS RESEARCH, 2015, 25 (10): : 559 - 565
[48] Exploring the Effect of Lanthanum on the Corrosion Resistance and Antimicrobial Properties of Fe-20Cr-18Ni-6Mo-0.8Cu-0.2N Stainless Steel in Seawater
Li, Haojun
Jiang, Quantong
Liu, Xingbin
Sun, Chen
Lu, Dongzhu
Liu, Nazhen
Duan, Jizhou
Hou, Baorong
ADVANCED ENGINEERING MATERIALS, 2025,
[49] Degradation in mechanical properties of stainless steels C0.12Cr18Ni10Ti and C0.08Cr16Ni11Mo3 Materials for hexagonal ducts of spent fuel assemblies from the BN-350 fast neutron reactor
Kadyrzhanov, K. K.
Kislitsin, S. B.
Maksimkin, O. P.
Romanenko, O. G.
Turkebaev, T. E.
SAFETY RELATED ISSUES OF SPENT NUCLEAR FUEL STORAGE, 2007, : 329 - +
[50] Evaluation of the sliding wear and corrosion performance of triode-plasma nitrided Fe-17Cr-20Mn-0.5N high-manganese and Fe-19Cr-35Ni-1.2Si high-nickel austenitic stainless steels
Tao, Xiao
Li, Xiaoying
Dong, Hanshan
Matthews, Allan
Leyland, Adrian
SURFACE & COATINGS TECHNOLOGY, 2021, 409

← 1 2 3 4 5 →