Effect of C, N, Mn and Mo on the Ms and Md temperatures in high-purity Fe-18%Cr-10%Ni stainless steels

被引：0
|
作者：
Tanino, M [1 ]
Liu, CM [1 ]
Tsuchiya, A [1 ]
Matsuo, T [1 ]
机构：
[1] Tohoku Univ, Inst Mat Res, Aoba Ku, Sendai, Miyagi 98077, Japan
来源：
THERMEC '97 - INTERNATIONAL CONFERENCE ON THERMOMECHANICAL PROCESSING OF STEELS AND OTHER MATERIALS, VOLS I-II | 1997年
关键词：
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Effects of interstitial elements C and N as well as substitutional elements Mn and Mo on the Ms and Md30 temperatures in high purity 18mass%Cr-10mass%Ni metastable austenitic stainless steels were studied by means of magnetic measurement, and modified coefficients for these elements for calculating the Ms and Md30 temperatures were proposed. It is suggested that the constants in the modified equations should be increased by about 20 degrees C for high purity austenitic stainless steels. This may be mainly caused by the decrease in impurity elements such as O, S, P etc. which are not included in the equations.
引用
收藏
页码：195 / 201
页数：7
相关论文
共 50 条
  • [21] Effect of Ni and Mn on the Creep Behaviour of 9–10 %Cr Steels with Low N and High B
    R. Kaibyshev
    R. Mishnev
    E. Tkachev
    N. Dudova
    Transactions of the Indian Institute of Metals, 2016, 69 : 203 - 210
  • [22] Effect of Ni and Mn on the Creep Behaviour of 9-10 %Cr Steels with Low N and High B
    Kaibyshev, R.
    Mishnev, R.
    Tkachev, E.
    Dudova, N.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2016, 69 (02) : 203 - 210
  • [23] TEM & EBSD study on deformation behavior of high nitrogen austenitic Fe-18Cr-18Mn-Mo-0.9N stainless steel
    Lee, Tae-Ho
    Kim, Sung-Joon
    Kang, Suk Hoon
    Oh, Kyu Hwan
    Takaki, Setsuo
    ADVANCES IN NANOMATERIALS AND PROCESSING, PTS 1 AND 2, 2007, 124-126 : 1333 - +
  • [24] Crystallographic details of precipitates in Fe-22Cr-21Ni-6Mo-(N) superaustenitic stainless steels aged at 900 °C
    Tae-Ho Lee
    Sung-Joon Kim
    Yun-Chul Jung
    Metallurgical and Materials Transactions A, 2000, 31 : 1713 - 1723
  • [25] Crystallographic details of precipitates in Fe-22Cr-21Ni-6Mo-(N) superaustenitic stainless steels aged at 900°C
    Lee, TH
    Kim, SJ
    Jung, YC
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2000, 31 (07): : 1713 - 1723
  • [26] VOLUME AND INTERGRANULAR SELF-DIFFUSION OF FE-59 IN AUSTENITE OF HIGH-PURITY WITH 18-PERCENT CR AND 10-PERCENT NI
    JUVEDUC, D
    TREHEUX, D
    GUIRALDENQ, P
    SCRIPTA METALLURGICA, 1978, 12 (12): : 1107 - 1110
  • [27] HOT CORROSION OF FE-10CR-18NI-5MN-5AL-SI-N STEELS IN MOLTEN SULFATE DEPOSITS
    GHANEM, WA
    STEEL RESEARCH, 1994, 65 (03): : 120 - 123
  • [28] Developing high-strength, ductile Ni-free Fe-Cr-Mn-C-N stainless steels by interstitial-alloying and thermomechanical processing
    Rasouli, Dariush
    Kermanpur, Ahmad
    Najafizadeh, Abbas
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2019, 8 (03): : 2846 - 2853
  • [29] Analysis of small-angle neutron scattering from Fe-18Cr-10Mn-16Ni-0.5N and Fe-21Cr-10Mn-17Ni-0.5C austenites
    Nadutov, VM
    Bulavin, LA
    Garamus, VM
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 264 (1-2): : 286 - 290
  • [30] Analysis of small-angle neutron scattering from Fe-18Cr-10Mn-16Ni-0.5N and Fe-21Cr-10Mn-17Ni-0.5C austenites
    Natl Acad of Sciences of Ukraine, Kiev, Ukraine
    Mater Sci Eng A Struct Mater Prop Microstruct Process, 1 (286-290):
12345