Effects of Nb content on the microstructure and magnetic properties of Fe-6.5wt.%Si alloy

被引：0

作者：

Cheng, Zhaoyang ^{[1
]}

Liu, Jing ^{[1
]}

Xiang, Zhidong ^{[1
]}

Lin, Xifeng ^{[1
]}

Zhu, Shang ^{[1
]}

Chen, Wensi ^{[1
]}

Zhu, Jiachen ^{[1
]}

机构：

[1] Wuhan Univ Sci & Technol, State Key Lab Refractories & Met, Wuhan 430081, Peoples R China

来源：

OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS | 2016年 / 10卷 / 1-2期

关键词：

Fe-6.5 wt.% Si alloy; Nb micro-alloyed; Microstructure; Magnetic properties; HIGH-SILICON STEEL; SI; EVOLUTION; TEXTURE; SHEET; WORKABILITY;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The effects of adding different contents of Nb on microstructure and magnetic properties of Fe-6.5wt.%Si alloy were investigated. The results show that the addition of a suitable amount of Nb to Fe-6.5wt.%Si alloys has improved the ductility of the alloy by precipitating Nb-Fe-Si intermetallics. The precipitated Nb-Fe-Si particles have refined the grains and lowering the Si content in the matrix, the latter effect has resulted in the reduction of the ordered phases or the degree of long range order in the alloy. However, when the Nb content is 2.0wt.%, the numbers of precipitates are too high and starting to pin the movement of dislocations, which has an adverse effect on the processability of the alloy. Though the Fe-6.5Si-1.5Nb (wt.%) alloy showed better magnetic properties than the Fe-6.5Si-2.0Nb (wt.%) alloy, the addition of Nb would deteriorate the magnetic properties of Fe-6.5wt.%Si alloy. Thus, the addition of Nb should be less than 1.5 wt.% to balance the processability and magnetic properties of Fe-6.5wt.%Si alloy.

引用

页码：82 / 86

页数：5

共 50 条

[41] Alloy elements added in Fe-6.5wt% Si silicon steel and their effect on ductility and magnetic properties
Cheng, Zhaoyang
Liu, Jing
Chen, Wensi
Sun, Guodong
Lin, Xifeng
Zhu, Yuan
Zhu, Shang
Zhu, Jiachen
Xiang, Zhidong
ADVANCED ENGINEERING MATERIALS III, PTS 1-3, 2013, 750-752 : 426 - +
[42] Deformation twinning feature and its effects on significant enhancement of tensile ductility in columnar-grained Fe-6.5wt.%Si alloy at intermediate temperatures
Xie, Jianxin
Fu, Huadong
Zhang, Zhihao
Jiang, Yanbin
INTERMETALLICS, 2012, 23 : 20 - 26
[43] Serrated Flow Behavior of Hot-Rolled Fe-6.5wt.%Si Sheet with Layered Structure
Shi, Xiangju
Liang, Yongfeng
Liu, Binbin
Ding, Zhiyi
Zhang, Bao
Ye, Feng
METALS, 2019, 9 (10)
[44] Enhanced Processing Performance of Large-Sized Fe-6.5wt.%Si Alloy Through Grain Refinement and Reduction of Ordering Degree
Xuan, Dongpo
Xu, Ning
Liu, Xuming
Guo, Han
Li, Zhijian
Geng, Zhiyu
Wang, Yitong
Dong, Linshuo
Xue, Feng
Zhang, Zhihao
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,
[45] Effects of Cu content on magnetic properties of nanocrystalline Fe-Cu-Nb-Si-B alloy ribbons
Li, P.
Zheng, Z. X.
Su, H. L.
Wu, Y. C.
MATERIALS SCIENCE AND TECHNOLOGY, 2013, 29 (11) : 1324 - 1327
[46] Flow Behavior Characteristics and Processing Map of Fe-6.5wt. % Si Alloys during Hot Compression
Wen, Shibo
Han, Chaoyu
Zhang, Bao
Liang, Yongfeng
Ye, Feng
Lin, Junpin
METALS, 2018, 8 (03)
[47] Magnetic properties evaluation of spray formed and rolled Fe-6.5 wt.% Si-1.0 wt.% Al alloy
Kasama, A. H.
Bolfarini, C.
Kiminami, C. S.
Botta Filho, W. J.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 449 (375-377): : 375 - 377
[48] Directional recrystallization and microstructures of an Fe-6.5wt%Si alloy
Zhang Z.
Chen G.
Bei H.
Li F.
Ye F.
Chen G.
Liu C.-T.
Journal of Materials Research, 2009, 24 (8) : 2654 - 2660
[49] Directional recrystallization and microstructures of an Fe-6.5wt%Si alloy
Zhang, Zhongwu
Chen, Guang
Bei, Hongbin
Li, Feng
Ye, Feng
Chen, Guoliang
Liu, Chain-Tsuan
JOURNAL OF MATERIALS RESEARCH, 2009, 24 (08) : 2654 - 2660
[50] Impact of rolling temperature on microstructure, ordered phases, and ductility in Fe–6.5 wt% Si magnetic material
Changsheng Li
Guojun Cai
Ban Cai
Qiwen Wang
Journal of Materials Research, 2016, 31 : 3004 - 3015

← 1 2 3 4 5 →