Effect of boron on intragranular ferrite nucleation mechanism in coarse grain heat-affected zone of high-nitrogen steel

被引：17

作者：

Shi, Zhongran ^{[1
,2
]}

Wang, Jiaji ^{[3
]}

Chai, Xiyang ^{[1
]}

Wang, Shihong ^{[1
]}

Chen, Gang ^{[1
]}

Wang, Ruizhen ^{[1
]}

机构：

[1] Cent Iron & Steel Res Inst, Dept Struct Steels, Beijing 100081, Peoples R China

[2] Yantai CISRI Marine Equipment Mat Appl Technol Co, Yantai 265600, Peoples R China

[3] State Key Lab Met Mat Marine Equipment & Applicat, Anshan 114000, Peoples R China

来源：

MATERIALS LETTERS | 2020年 / 258卷

基金：

国家重点研发计划;

关键词：

Welding; High-nitrogen steel; Boron; CGHAZ; Microstructure; TI; BOUNDARIES; AUSTENITE;

D O I：

10.1016/j.matlet.2019.126819

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The effect of boron on intragranular ferrite (IGF) nucleation mechanism in the simulated coarse grain heated-affected zone (CGHAZ) of a high-nitrogen steel was investigated. When boron (B) was added to the steel, the ferrite transformation temperature increased from 775 degrees C to 800 degrees C and the amount of polygonal ferrite increased from 63.2% to 78.6%. Consequently, the ductile-to-brittle transition temperature decreased from -30 degrees C to -50 degrees C. (Ti,V)(C,N)-MnS-BN, MnS-BN, Al2O3-MnS-BN, and BN served as IGF nucleation sites. The core of the complex precipitates was formed by undissolved (Ti,V)(C,N)-MnS, Al2O3-MnS, and MnS, with a BN cap formed on the undissolved precipitates, which increased the IGF nucleation potency. (C) 2019 Elsevier B.V. All rights reserved.

引用

页数：5

共 50 条

[41] Intercritical Austenite Formation and Decomposition in the Coarse Grain Heat-Affected Zone of an X80 Line Pipe Steel
Tianbi Zhang
Sabyasachi Roy
Sudipta Patra
Warren J. Poole
Matthias Militzer
Metallurgical and Materials Transactions A, 2022, 53 : 3239 - 3244
[42] (Ti, Nb) (C, N) comples particle coarsening in weld coarse grain heat-affected zone for microalloyed steel
Zhang, Ying-Qiao
Zhang, Han-Qian
Liu, Wei-Ming
Cailiao Kexue yu Gongyi/Material Science and Technology, 2008, 16 (SUPPL. 1): : 33 - 37
[43] Direct Observation of Austenite and Pearlite Formation in Thermally Simulated Coarse Grain Heat-Affected Zone of Pearlite Railway Steel
Khan, Adnan Raza
Shengfu, Yu
Zubair, Muhammad
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (01) : 497 - 509
[44] Grain refinement in coarse-grained heat-affected zone of Al-Ti-Mg complex deoxidised steel
Liu, Yu
Wan, Xiangliang
Li, Guangqiang
Wang, Yong
Zheng, Wan
Hou, Yanhui
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2019, 24 (01) : 43 - 51
[45] Heat-affected zone cracking susceptibility in high nitrogen-containing austenitic stainless steel
Woo, I
Horinouchi, T
Kikuchi, Y
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2001, 87 (07): : 486 - 493
[46] Influence of Boron on Stress-Relief Cracking Susceptibility of T23 Steel The effects of increasing boron content levels in the coarse grain heat-affected zone are analyzed
Zhang, D.
Wang, X.
WELDING JOURNAL, 2024, 103 (01) : 1S - 11S
[47] Chromium nitride precipitation behavior in weld heat-affected zone of high nitrogen stainless steel
Ogawa, M
Hiraoka, K
Katada, Y
Sagara, M
Tsukamoto, S
ISIJ INTERNATIONAL, 2002, 42 (12) : 1391 - 1398
[48] Mechanism of BN-Promoting Acicular Ferrite Nucleation to Improve Heat-Affected Zone Toughness of V-N-Ti Microalloyed Offshore Steel
Shi, Zhongran
Pan, Tao
Li, Yu
Luo, Xiaobing
Chai, Feng
MATERIALS, 2022, 15 (04)
[49] Effect of High Heat Input on Toughness and Microstructure of Coarse Grain Heat Affected Zone in Zr Bearing Low Carbon Steel
Shi, Minghao
Zhang, Pengyan
Wang, Chao
Zhu, Fuxian
ISIJ INTERNATIONAL, 2014, 54 (04) : 932 - 937
[50] Effect of heat-input on austenite grain size in the heat-affected zone of HSLA-100 steel
Shome, M.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 445 : 454 - 460

← 1 2 3 4 5 →