Effect of boron on intragranular ferrite nucleation mechanism in coarse grain heat-affected zone of high-nitrogen steel

被引：17

作者：

Shi, Zhongran ^{[1
,2
]}

Wang, Jiaji ^{[3
]}

Chai, Xiyang ^{[1
]}

Wang, Shihong ^{[1
]}

Chen, Gang ^{[1
]}

Wang, Ruizhen ^{[1
]}

机构：

[1] Cent Iron & Steel Res Inst, Dept Struct Steels, Beijing 100081, Peoples R China

[2] Yantai CISRI Marine Equipment Mat Appl Technol Co, Yantai 265600, Peoples R China

[3] State Key Lab Met Mat Marine Equipment & Applicat, Anshan 114000, Peoples R China

来源：

MATERIALS LETTERS | 2020年 / 258卷

基金：

国家重点研发计划;

关键词：

Welding; High-nitrogen steel; Boron; CGHAZ; Microstructure; TI; BOUNDARIES; AUSTENITE;

D O I：

10.1016/j.matlet.2019.126819

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The effect of boron on intragranular ferrite (IGF) nucleation mechanism in the simulated coarse grain heated-affected zone (CGHAZ) of a high-nitrogen steel was investigated. When boron (B) was added to the steel, the ferrite transformation temperature increased from 775 degrees C to 800 degrees C and the amount of polygonal ferrite increased from 63.2% to 78.6%. Consequently, the ductile-to-brittle transition temperature decreased from -30 degrees C to -50 degrees C. (Ti,V)(C,N)-MnS-BN, MnS-BN, Al2O3-MnS-BN, and BN served as IGF nucleation sites. The core of the complex precipitates was formed by undissolved (Ti,V)(C,N)-MnS, Al2O3-MnS, and MnS, with a BN cap formed on the undissolved precipitates, which increased the IGF nucleation potency. (C) 2019 Elsevier B.V. All rights reserved.

引用

页数：5

共 50 条

[31] Effects of Weld Heat Input on Microstructures of Coarse Grain Heat-Affected Zone of Bearing-Nb HF Steel Plate
Zhao, Yisheng
Zhang, Xinming
INDUSTRIAL DESIGN AND MECHANICS POWER II, 2013, 437 : 582 - 585
[32] Micromechanism of Decrease of Impact Toughness in Coarse-Grain Heat-Affected Zone of HSLA Steel with Increasing Welding Heat Input
R. Cao
J. Li
D. S. Liu
J. Y. Ma
J. H. Chen
Metallurgical and Materials Transactions A, 2015, 46 : 2999 - 3014
[33] Influence of welding heat input on microstructure and properties of coarse grain heat-affected zone in X100 pipeline steel
Zhang, Xiaoyong
Gao, Huilin
Zhuang, Chuanjing
Ji, Lingkang
Hanjie Xuebao/Transactions of the China Welding Institution, 2010, 31 (03): : 29 - 32
[34] Micromechanism of Decrease of Impact Toughness in Coarse-Grain Heat-Affected Zone of HSLA Steel with Increasing Welding Heat Input
Cao, R.
Li, J.
Liu, D. S.
Ma, J. Y.
Chen, J. H.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (07): : 2999 - 3014
[35] Microstructure, impact toughness and TEM analysis in the coarse grain heat-affected zone (CGHAZ) of HQ130 high strength steel
Zou, Zengda
Li, Yajiang
Yin, Shike
Journal of Materials Science and Technology, 1999, 15 (06): : 555 - 558
[36] Effect of Ti on structure and toughness of coarse grain heat affected zone of high strength low alloy steel
Chen, M.A.
Tang, Y.M.
Lou, S.N.
2001, Science Press (22):
[37] Physical simulation of the heat-affected zone in nickel-free high-nitrogen stainless steel weld at various peak temperatures and cooling rates
Dhanasekar, R.
Kumar, T. Satish
Kumar, K. Krishna
Jeyaprakash, N.
MATERIALS TODAY COMMUNICATIONS, 2024, 38
[38] Research on influencing factor of impact toughness in coarse grain heat-affected zone for X80 pipeline steel
Chen, C.-X., 2005, Beijing Institute of Aeronautical Materials (BIAM)
[39] Intercritical Austenite Formation and Decomposition in the Coarse Grain Heat-Affected Zone of an X80 Line Pipe Steel
Zhang, Tianbi
Roy, Sabyasachi
Patra, Sudipta
Poole, Warren J.
Militzer, Matthias
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2022, 53 (09): : 3239 - 3244
[40] Direct Observation of Austenite and Pearlite Formation in Thermally Simulated Coarse Grain Heat-Affected Zone of Pearlite Railway Steel
Adnan Raza khan
Yu Shengfu
Muhammad Zubair
Journal of Materials Engineering and Performance, 2021, 30 : 497 - 509

← 1 2 3 4 5 →