Photoelastic analysis of edge-crack near a circular hole for vessel nozzle

被引：0
|
作者：
Liu, AZ [1 ]
Zhou, DX [1 ]
机构：
[1] Anhui Inst Architecture & Ind, Hefei 230022, Peoples R China
来源：
ENVIRONMENT EFFECTS ON FRACTURE AND DAMAGE | 2004年
关键词：
fracture mechanics; photo-elastic; stress concentration;
D O I：
暂无
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
In this paper certain results of photoelastic tests on the reinforced plates are introduced, which are experimental results to simulate the cracks at vessel nozzles. The behaviors of the cracks at the holes in the testing reinforced plates are analyzed in detail. It is helpful to estimate the fatigue life of the cracks.
引用
收藏
页码：187 / 189
页数：3
相关论文
共 50 条
  • [31] Analysis of a crack emanating from a circular hole in an infinite plane subjected to maxwell stress
    Omatsu, Norio
    Hasebe, Norio
    Wang, Xianfeng
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2003, 69 (05): : 888 - 893
  • [32] Hybrid stress analysis of a near-surface circular hole in finite structures
    Alshaya, Abdullah
    Lin, Shiang-Jiun
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2020, 234 (07) : 1366 - 1381
  • [33] Numerical analysis of rectangular plate with symmetric edge cracks and edge half-circular hole cracks in tension
    YAN, Xiangqiao
    JOURNAL OF TESTING AND EVALUATION, 2007, 35 (05) : 557 - 562
  • [34] Fracture analysis of the set-in nozzle of a PWR reactor pressure vessel - Part 1: Determination of critical crack
    Murtaza, Usman Tariq
    Hyder, M. Javed
    ENGINEERING FRACTURE MECHANICS, 2018, 192 : 343 - 361
  • [35] Analysis of a crack approaching a circular hole in cross-ply laminates under biaxial loading
    Cheong, SK
    Kwon, ON
    KSME INTERNATIONAL JOURNAL, 1998, 12 (01): : 41 - 49
  • [36] Analysis of a crack approaching a circular hole in cross-ply laminates under biaxial loading
    Seong Kyun Cheong
    Oh Nam Kwon
    KSME International Journal, 1998, 12 : 41 - 49
  • [37] COMPARISON OF AN ENGINEERING ESTIMATE WITH A NUMERICAL-SOLUTION FOR THE STRESS-CONCENTRATION FACTOR OF A HOLE NEAR A CIRCULAR EDGE NOTCH
    SCHIJVE, J
    FRAGA, WE
    HEWITT, RL
    INTERNATIONAL JOURNAL OF FATIGUE, 1986, 8 (03) : 111 - 118
  • [38] Elastic-plastic Stress and Strain Analysis of a Hole-edge Crack under Biaxial Load
    Wang Zhongxian
    Xu Wei
    Liu Rui
    MECHATRONICS AND INDUSTRIAL INFORMATICS, PTS 1-4, 2013, 321-324 : 218 - 221
  • [39] Engineering calculation and analysis for properties near the hole edge of 3D braided composites
    Chengdu Aircraft Design and Research Institute, Chengdu 610041, China
    Fuhe Cailiao Xuebao, 2006, 3 (176-180):
  • [40] Near tip stress intensity factor for an edge-crack in a Pb(ZrxTi1-x)O3 thin film with 90° domain switching under a continuous laser irradiation
    Wu, B.
    Zheng, X. J.
    Hu, H. P.
    Li, D. H.
    Ma, Y.
    Zhou, Y. C.
    ENGINEERING FRACTURE MECHANICS, 2009, 76 (12) : 1811 - 1821
12345