Cold sprayed metal-ceramic coatings using satellited powders

被引：35
|
作者：
Al-Hamdani, K. S. [1 ,3 ]
Murray, J. W. [2 ]
Hussain, T. [2 ]
Kennedy, A. [2 ]
Clare, A. T. [1 ]
机构：
[1] Univ Nottingham, ACEL, Nottingham NG7 2RD, England
[2] Univ Nottingham, Adv Mat Res Grp, Nottingham NG7 2RD, England
[3] Univ Thi Qar, Coll Engn, Nasiriyah 64001, Iraq
来源：
MATERIALS LETTERS | 2017年 / 198卷
基金：
英国工程与自然科学研究理事会;
关键词：
Satelliting; Metal-ceramic; Titanium carbide; Aluminium; Cold spray; COMPOSITE COATINGS; TITANIUM; ALLOYS;
D O I：
10.1016/j.matlet.2017.03.175
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A new 'satelliting' preparation method was used to create a feedstock of pure Al powder to which a much finer TiC powder was attached. Cold spray (CS) coatings of pure Al, blended Al/TiC and satellited Al/TiC were applied to Al substrates. A seven-fold increase in TiC area fraction was measured in the satellited coating compared to that in the blended coating. Coating thickness also increased as a result of increased ceramic deposition. Cross-sectional analysis revealed that the cohesion achieved between Al and TiC, during satelliting process, survives the CS process, and is hence an effective method of producing ceramic-metal coatings. (C) 2017 Elsevier B.V. All rights reserved.
引用
收藏
页码：184 / 187
页数：4
相关论文
共 50 条
  • [41] Comparative Microstructural Study of Cold Sprayed Coatings Using Pure Aluminum and Aluminum Alloy Powders
    Qi, Jiashuo
    Raoelison, Rija Nirina
    Verdy, Christophe
    Li, Jishuai
    Rachik, Mohamed
    15TH INTERNATIONAL ALUMINIUM CONFERENCE, INALCO 2023, 2023,
  • [42] Calculation of Particle Parameters for Cold Spraying of Metal-Ceramic Mixtures
    Klinkov, S. V.
    Kosarev, V. F.
    Sova, A. A.
    Smurov, I.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2009, 18 (5-6) : 944 - 956
  • [43] Composite coatings with refractory metal matrix reinforced with nanodispersed metal-ceramic component
    Gorynin I.V.
    Burkhanov G.S.
    Farmakovskiy B.V.
    Burkhanov, G.S. (genburkh@imet.ac.ru), 2017, Maik Nauka Publishing / Springer SBM (08) : 75 - 80
  • [44] Calculation of Particle Parameters for Cold Spraying of Metal-Ceramic Mixtures
    S. V. Klinkov
    V. F. Kosarev
    A. A. Sova
    I. Smurov
    Journal of Thermal Spray Technology, 2009, 18 : 944 - 956
  • [45] Adhesion of rough cold sprayed metal coatings on polymers
    Tsai, Jung-Ting
    Jun, Martin Byung-Guk
    Bahr, David F.
    SURFACE ENGINEERING, 2023, 39 (02) : 161 - 173
  • [46] The structure and properties of metal and metal-ceramic coatings produced by physical vapour deposition
    Rybnikov, AI
    Tchizhik, AA
    Ogurtsov, AP
    Malashenko, IS
    Yakovchuk, KY
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 55 (3-4) : 234 - 241
  • [47] Utilization of Composite Powders to Apply Ceramic Coatings in Cold Spray
    Taylor, K.
    Jodoin, B.
    Karov, J.
    SURFACE ENGINEERING, PROCEEDINGS, 2006, : 119 - +
  • [48] METAL-CERAMIC BOUNDARY
    VANVLACK, LH
    METALS ENGINEERING QUARTERLY, 1965, 5 (04): : 7 - &
  • [49] METAL-CERAMIC BRAZING
    KYSER, RH
    SMOOT, AR
    ARNETT, HD
    REPORT OF NRL PROGRESS, 1969, (OCT): : 18 - &
  • [50] THE METAL-CERAMIC RESTORATION
    MCLEAN, JW
    DENTAL CLINICS OF NORTH AMERICA, 1983, 27 (04) : 747 - 761
12345