Cold sprayed metal-ceramic coatings using satellited powders

被引:35
|
作者
Al-Hamdani, K. S. [1 ,3 ]
Murray, J. W. [2 ]
Hussain, T. [2 ]
Kennedy, A. [2 ]
Clare, A. T. [1 ]
机构
[1] Univ Nottingham, ACEL, Nottingham NG7 2RD, England
[2] Univ Nottingham, Adv Mat Res Grp, Nottingham NG7 2RD, England
[3] Univ Thi Qar, Coll Engn, Nasiriyah 64001, Iraq
基金
英国工程与自然科学研究理事会;
关键词
Satelliting; Metal-ceramic; Titanium carbide; Aluminium; Cold spray; COMPOSITE COATINGS; TITANIUM; ALLOYS;
D O I
10.1016/j.matlet.2017.03.175
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A new 'satelliting' preparation method was used to create a feedstock of pure Al powder to which a much finer TiC powder was attached. Cold spray (CS) coatings of pure Al, blended Al/TiC and satellited Al/TiC were applied to Al substrates. A seven-fold increase in TiC area fraction was measured in the satellited coating compared to that in the blended coating. Coating thickness also increased as a result of increased ceramic deposition. Cross-sectional analysis revealed that the cohesion achieved between Al and TiC, during satelliting process, survives the CS process, and is hence an effective method of producing ceramic-metal coatings. (C) 2017 Elsevier B.V. All rights reserved.
引用
收藏
页码:184 / 187
页数:4
相关论文
共 50 条
  • [31] An investigation of thermal conductivity of ceramic plasma coatings sprayed with plated powders
    Gusev V.M.
    Elagina O.Y.
    Mordynsky V.B.
    Tyuftyaev A.S.
    Inorganic Materials: Applied Research, 2016, 7 (3) : 372 - 375
  • [32] Scaling Laws (SLM) for Additive Technologies of Metal-Ceramic Coatings
    Golyshev, A. A.
    Orishich, A. M.
    HIGH ENERGY PROCESSES IN CONDENSED MATTER (HEPCM 2019), 2019, 2125
  • [33] Tribological investigation of metal-ceramic composite coatings in high temperature
    H.T.MA
    R.J.ZHANG
    Y.S.JIN
    G.Barbezat
    Science China Mathematics, 2001, (S1) : 348 - 353
  • [34] Tribological investigation of metal-ceramic composite coatings in high temperature
    Ma, HT
    Zhang, RJ
    Jin, YS
    Barbezat, G
    SCIENCE IN CHINA SERIES A-MATHEMATICS PHYSICS ASTRONOMY, 2001, 44 : 348 - 353
  • [35] HYDROPHOBIZATION (WATERPROOFING) OF METAL-CERAMIC COMPONENTS WITH ZN AND CD COATINGS
    KOVARSKII, NY
    TOLSTOKONEV, AP
    BOGDANOVICH, VB
    PROTECTION OF METALS, 1988, 24 (04): : 465 - &
  • [36] Delamination analysis of metal-ceramic multilayer coatings subject to nanoindentation
    Jamison, Ryan D.
    Shen, Yu-Lin
    SURFACE & COATINGS TECHNOLOGY, 2016, 303 : 3 - 11
  • [37] Numerical simulations of ceramic deposition and retention in metal-ceramic composite cold spray
    Chakrabarty, Rohan
    Song, Jun
    SURFACE & COATINGS TECHNOLOGY, 2020, 385
  • [38] Optimization of Laser Cladding on The Base of Additive Technologies of Metal-Ceramic Powders
    Orishich, A. M.
    Golyshev, A. A.
    Malikov, A. G.
    Mesenzova, I. S.
    Pavlov, N. A.
    PROCEEDINGS OF THE XXV CONFERENCE ON HIGH-ENERGY PROCESSES IN CONDENSED MATTER (HEPCM 2017), 2017, 1893
  • [39] Graded plasma spraying of premixed metal-ceramic powders on metallic substrates
    Lima, CRC
    Trevisan, RE
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 1997, 6 (02) : 199 - 204
  • [40] Features of electron-beam processing of metal-ceramic powders in the forevacuum
    Klimov, A. S.
    Zenin, A. A.
    Tran Van Tu
    Bakeev, I. Yu
    14TH INTERNATIONAL CONFERENCE GAS DISCHARGE PLASMAS AND THEIR APPLICATIONS, 2019, 1393