A method to reduce power consumption of active-clamped flyback converter at no-load condition

被引:0
|
作者
Kim, Jong Hyun [1 ]
Ryu, Myung Hyo [1 ]
Min, Byung Duk [1 ]
Song, Eui Ho [2 ]
机构
[1] Korea Electrotechnol Res Inst, PO Box 20, Chang Won 641600, South Korea
[2] Changwon Natl Univ, Chang Won 641600, South Korea
关键词
active-clamped flyback converter; power consumption; no-load condition;
D O I
暂无
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
a method for lower power consumption of active-clamped flyback converter at no-load condition is proposed in this study. The active-clamped flyback converter is one of the most well known converters, which can reduce the switching losses and EMI noises. However this converter is more than conventional flyback converter with respect to power consumption in the no-load condition. This is due to high conduction current of resonant converter. To reduce conduction loss at no-load condition, the converter turns off the auxiliary switch and operates only flyback mode. Some experimental results are included to verify the system performances in this paper. The test result showed that the power loss is 0.75W at no-load condition. This result is the compliance with the European Code of Conduct limits regarding the no-load power consumption.
引用
收藏
页码:2544 / +
页数:2
相关论文
共 50 条
  • [31] Analysis and Design of a 2 MHz GaN-based Active-Clamped Isolated SEPIC Converter for Low-Power Automotive Subnets
    Cabizza, Stefano
    Corradini, Luca
    Spiazzi, Giorgio
    2022 IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION, APEC, 2022, : 2127 - 2134
  • [32] Modified Active-Clamped Current-Fed DC-DC Push-Pull Converter
    Miranda-Teran, Eldin Mario
    Tofoli, Fernando Lessa
    Torrico Bascope, Grover Victor
    Torrico Bascope, Rene Pastor
    ENERGIES, 2023, 16 (17)
  • [33] Design of Active-Clamped PushPull-Based DCDC Converter With High Step-Up Ratio and High Power Conversion Efficiency
    Huang, Kuan-Pin
    Wai, Rong-Jong
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 2023, 38 (12) : 15731 - 15749
  • [34] Vibration Characteristics of ±800kV Converter Transformer Under No-load Condition
    Yuan, Yao
    Qian, Menghao
    Zhao, Linjie
    Yin, Fanghui
    Wang, Liming
    2022 IEEE CONFERENCE ON ELECTRICAL INSULATION AND DIELECTRIC PHENOMENA (IEEE CEIDP 2022), 2022, : 202 - 205
  • [35] Active-Clamped Zero-Current Switching Current-Fed Half-Bridge Converter
    Moraes, Cassiano Ferro
    Carati, Emerson Giovani
    da Costa, Jean Patric
    Cardoso, Rafael
    de Oliveira Stein, Carlos Marcelo
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 2020, 35 (07) : 7100 - 7109
  • [36] Buck converter Associated with Active clamp Flyback converter for PV Power System
    Tseng, S. -Y.
    Li, Y. -J.
    Wu, Y. -J.
    2008 IEEE INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY TECHNOLOGIES (ICSET), VOLS 1 AND 2, 2008, : 916 - 921
  • [37] Direct AC-AC Active-Clamped Half-Bridge Converter for Inductive Charging Applications
    Huynh, Phuoc Sang
    Ronanki, Deepak
    Vincent, Deepa
    Williamson, Sheldon S.
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 2021, 36 (02) : 1356 - 1365
  • [38] FPGA Implementation of a PWM for a Three-Phase DC-AC Multilevel Active-Clamped Converter
    Lupon, Emili
    Busquets-Monge, Sergio
    Nicolas-Apruzzese, Joan
    IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, 2014, 10 (02) : 1296 - 1306
  • [39] Interleaved ZVS Active-Clamped Bidirectional DC-DC Converter for Hybrid-Electric Vehicles
    Gatto, G.
    Isastia, V.
    Marongiu, I.
    Meo, S.
    Perfetto, A.
    INTERNATIONAL REVIEW OF ELECTRICAL ENGINEERING-IREE, 2011, 6 (05): : 2188 - 2197
  • [40] An Active-Clamped Full-Wave Zero-Current-Switched Quasi-Resonant Boost Converter in Power Factor Correction Application
    Firmansyah, E.
    Abe, S.
    Shoyama, M.
    Tomioka, S.
    Ninomiya, T.
    2010 TWENTY-FIFTH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION (APEC), 2010, : 30 - 35