A method to reduce power consumption of active-clamped flyback converter at no-load condition

被引：0
|
作者：
Kim, Jong Hyun [1 ]
Ryu, Myung Hyo [1 ]
Min, Byung Duk [1 ]
Song, Eui Ho [2 ]
机构：
[1] Korea Electrotechnol Res Inst, PO Box 20, Chang Won 641600, South Korea
[2] Changwon Natl Univ, Chang Won 641600, South Korea
来源：
IECON 2006 - 32ND ANNUAL CONFERENCE ON IEEE INDUSTRIAL ELECTRONICS, VOLS 1-11 | 2006年
关键词：
active-clamped flyback converter; power consumption; no-load condition;
D O I：
暂无
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
a method for lower power consumption of active-clamped flyback converter at no-load condition is proposed in this study. The active-clamped flyback converter is one of the most well known converters, which can reduce the switching losses and EMI noises. However this converter is more than conventional flyback converter with respect to power consumption in the no-load condition. This is due to high conduction current of resonant converter. To reduce conduction loss at no-load condition, the converter turns off the auxiliary switch and operates only flyback mode. Some experimental results are included to verify the system performances in this paper. The test result showed that the power loss is 0.75W at no-load condition. This result is the compliance with the European Code of Conduct limits regarding the no-load power consumption.
引用
收藏
页码：2544 / +
页数：2
相关论文
共 50 条
  • [21] Single-Phase Active-Clamped Isolated SEPIC PFC Converter with Partial Power Processing Output Stage
    Wu, Deliang
    Ayyanar, Raja
    2020 THIRTY-FIFTH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION (APEC 2020), 2020, : 1285 - 1291
  • [22] Single Power-Conversion Active-Clamped AC/DC Converter Employing Si/SiC Hybrid Switch
    Bai, Changkyu
    Kim, Minsung
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2024, 71 (02) : 1616 - 1630
  • [23] Isolated Active-Clamped SEPIC PFC Converter Based on SiC Devices and Integrated Magnetics
    Wu, Deliang
    Ayyanar, Rajapandian
    2019 IEEE 7TH WORKSHOP ON WIDE BANDGAP POWER DEVICES AND APPLICATIONS (WIPDA 2019), 2019, : 151 - 156
  • [24] Improvement of characteristics of active-clamped ZVS forward converter with a synchronous rectifier for high efficiency
    Lim, YH
    Park, SK
    Oh, YK
    Park, CB
    TENCON 2004 - 2004 IEEE REGION 10 CONFERENCE, VOLS A-D, PROCEEDINGS: ANALOG AND DIGITAL TECHNIQUES IN ELECTRICAL ENGINEERING, 2004, : D89 - D92
  • [25] Cyclic Modulation of Active-Clamped Single Power-Conversion AC–DC Converter for Self-Loss Balancing
    Bai, Changkyu
    Kim, Minsung
    IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, 2024, 20 (04) : 5899 - 5913
  • [26] Analysis of the active-clamped soft-switched forward converter without output filter
    Spiazzi, G
    Buso, S
    Mattavelli, P
    PESC 04: 2004 IEEE 35TH ANNUAL POWER ELECTRONICS SPECIALISTS CONFERENCE, VOLS 1-6, CONFERENCE PROCEEDINGS, 2004, : 3829 - 3835
  • [27] Low Standby Power Consumption and High Cross Regulation of Active Clamp Flyback Converter with SSPR
    Jung, Jee-Hoon
    Ahmed, Shehab
    IECON 2010: 36TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2010,
  • [28] MOSFET power consumption validation in flyback switching converter design
    Lee, Watson
    Zhang, YuBian
    TENCON 2006 - 2006 IEEE REGION 10 CONFERENCE, VOLS 1-4, 2006, : 1312 - +
  • [29] Ultra low input current consumption power supplies under no-load condition for discontinuous transmission systems
    Garate, Jose Ignacio
    de Diego, Jose Miguel
    Kaegi, Javier Monsalve
    2007 IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS, PROCEEDINGS, VOLS 1-8, 2007, : 1542 - +
  • [30] Zero-Voltage Switching Analysis of Active-Clamped Forward Converter with Current-Doubler Rectifier
    Jang, Paul
    Cho, Bo-Hyung
    2015 9TH INTERNATIONAL CONFERENCE ON POWER ELECTRONICS AND ECCE ASIA (ICPE-ECCE ASIA), 2015, : 253 - 258
12345