Study on the process characteristics of vacuum hot pressing sintering of TiNiNb alloy based on "near net shape forming"

被引：5
|
作者：
Liu Junwei [1 ]
Li Yong [1 ]
Lu Shiqiang [1 ]
Wan Jun [1 ]
Gao Wenliang [1 ]
机构：
[1] Nanchang Hangkong Univ, Key Lab M Crostruct Control Metall Mat Jiangxi Pr, Nanchang 330063, Jiangxi, Peoples R China
来源：
MATERIALS LETTERS | 2021年 / 294卷
关键词：
TiNiNb alloy; Vacuum hot pressing sintering; Relative density; Microstructure; MECHANICAL-PROPERTIES; MICROSTRUCTURE; NB; TI;
D O I：
10.1016/j.matlet.2021.129758
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The TiNiNb pre-alloyed powder prepared after mechanical alloying was used as experimental material, and TiNiNb alloy was prepared by vacuum hot pressing sintering method (temperature 900 degrees C, pressure 35 MPa, vacuum degree 1.6 x 10(-3) Pa). The relative density and microstructure evoultion were analyzed by a serial of testing methods, such as: XRD and SEM etc. The results showed that the TiNiNb pre-alloyed powder presented amorphous state, the relative density of TiNiNb alloy after vacuum hot pressing sintering was 98.8%, and the alloy was completely crystallized. The microstructure of vacuum hot-pressed TiNiNb alloy is uniform, mainly composed of Ti-Ni matrix phase, beta-Nb phase, (Ti,Nb)(2)Ni hard phase and a small amount of TiC impurity phase. (C) 2021 Elsevier B.V. All rights reserved.
引用
收藏
页数：3
相关论文
共 50 条
  • [31] Effects of Vacuum Hot Pressing Sintering on the Performance of High Purity W-Si Alloy Target
    Ding Zhaochong
    He Jinjiang
    Luo Junfeng
    Li Yongjun
    Xiong Xiaodong
    RARE METAL MATERIALS AND ENGINEERING, 2014, 43 (06) : 1403 - 1406
  • [32] Near-Net-Shaping Hot Isostatic Pressing of Complicated Titanium Alloy Air Inlet
    Zhang H.-Y.
    Shi J.-L.
    Zhang X.-H.
    Yin Z.-W.
    Deng T.-Q.
    Xu X.-Z.
    Tuijin Jishu/Journal of Propulsion Technology, 2022, 43 (08):
  • [33] Study on Powder Metallurgy TC11 Alloy and Near-Net-Shape Process
    Wang Liang
    Lang Zebao
    Xu Xiaojing
    Shi Jinliang
    Jiang Yanqing
    Yao Caogen
    TI-2011: PROCEEDINGS OF THE 12TH WORLD CONFERENCE ON TITANIUM, VOL III, 2012, : 1839 - 1843
  • [34] Near net shape production of monolithic and composite high temperature ceramics by hot isostatic pressing (HIP)
    Larker, HT
    Lundberg, R
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1999, 19 (13-14) : 2367 - 2373
  • [35] Characterization and properties of CuZrAlTiNi high entropy alloy coating obtained by mechanical alloying and vacuum hot pressing sintering
    Ge, Wenjuan
    Wu, Bo
    Wang, Shouren
    Xu, Shuai
    Shang, Caiyun
    Zhang, Zitang
    Wang, Yan
    ADVANCED POWDER TECHNOLOGY, 2017, 28 (10) : 2556 - 2563
  • [36] A study on the optimal tool shape design in a hot forming process
    Jo, HH
    Lee, SK
    Ko, DC
    Kim, BM
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 111 (1-3) : 127 - 131
  • [37] Electromagnetic Continuous Casting Process for Near Net Shape Aluminum Alloy Billet
    Kim, Jong Ho
    Kim, Myoung-Gyun
    Park, Joonpyo
    Lee, Gyu-Chang
    Kim, Jubum
    PRICM 7, PTS 1-3, 2010, 654-656 : 1400 - 1403
  • [38] PRESSURE SINTERING OF SI3N4 SYSTEM FOR NEAR-NET SHAPE FORMING
    SAMANTA, SK
    WADA, H
    WANG, L
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1989, 111 (02): : 176 - 182
  • [39] Preform optimization for near-net-shape forming process of complex knuckle forging
    Cai Z.-Y.
    Meng F.-X.
    Chen Q.-M.
    Zhao X.
    Chen, Qing-Min (chenqm@jlu.edu.cn), 1600, Editorial Board of Jilin University (50): : 84 - 90
  • [40] Study of the hot-pressing sintering process of diamond/copper composites and their thermal conductivity
    Lu, Kaijie
    Wang, Chunju
    Wang, Changrui
    He, Haidong
    Fan, Xueliang
    Chen, Feng
    Qi, Fei
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 960
12345