Fabrication of a freestanding GaN layer by direct growth on a ZnO template using hydride vapor phase epitaxy

A new hydride vapor phase epitaxy (HVPE)-based approach for the fabrication of freestanding GaN (FS-GaN) substrates was investigated. For the direct formation of low-temperature GaN (LT-GaN) layers, the growth parameters were optimized: the polarity of ZnO, the growth temperature, and the V/III ratio. The FS-GaN layer was achieved by gas etching in an HVPE reactor. A fingerprint of Zn out-diffusion was detected in the photoluminescence measurements, especially for the thin (80 mu m) FS-GaN film; however, a thicker film (400 mu m) was effectively reduced by optimization of GaN growth. (C) 2010 Elsevier B.V. All rights reserved.