Grindability of Dental Cast Ti-Zr Binary Alloys

被引：0

作者：

Takahashi, Masatoshi ^{[1
]}

Kikuchi, Masafumi ^{[1
]}

Okuno, Osamu ^{[1
]}

机构：

[1] Tohoku Univ, Grad Sch Dent, Div Dent Biomat, Sendai, Miyagi 9808575, Japan

来源：

JOURNAL OF THE JAPAN INSTITUTE OF METALS | 2010年 / 74卷 / 06期

关键词：

biomaterial; titanium alloy; grindability; microstructure; dental alloy; MECHANICAL-PROPERTIES; TITANIUM-ZIRCONIUM; PHASE; AG;

D O I：

10.2320/jinstmet.74.351

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The purpose of this study was to improve the grindability of titanium by alloying with zirconium. The grindability of dental cast Ti-Zr binary alloys (10, 20, 30, 40 and 50 mass%Zr) was evaluated using a carborundum wheel. The Ti-Zr alloys up to 30 mass%Zr formed an a structure, and the 40 mass%Zr and 50 mass%Zr alloys formed an alpha' structure. The Ti-40 mass%Zr alloy at up to 1000 m.min(-1) and the Ti-50 mass%Zr alloy at up to 1250 m.min(-1) exhibited significantly higher grindability than titanium. More than twice the volume of metal was removed from the alloys than from titanium per minute. The improved grindability could be attributed to the a' structure in addition to the decrease in elongation. The Ti-Zr alloys, which formed an a' phase structure, are candidates for use as machinable biomaterial in dental applications.

引用

页码：351 / 355

页数：5

共 50 条

[41] Grindability of Ti alloys
Chan, KS
Koike, M
Okabe, T
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (04): : 1323 - 1331
[42] ON THE ALPHA-]BETA-TRANSFORMATION IN TI-ZR ALLOYS
SAUNDERS, N
ARGENT, BB
JOURNAL OF THE LESS-COMMON METALS, 1986, 125 : L11 - L13
[43] COMPOSITIONAL CHANGE IN SURFACE OF TI-ZR ALLOYS IN ARTIFICIAL BIOLIQUID
HANAWA, T
OKUNO, O
HAMANAKA, H
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1992, 56 (10) : 1168 - 1173
[44] Strengthening Mechanism of Ti-Zr Sintered Alloys with Sc Addition
Kariya, Shota
Nagata, Kouki
Umeda, Junko
Chen, Biao
Shen, Jianghua
Li, Shufeng
Kondoh, Katsuyoshi
Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 71 (10): : 482 - 491
[45] Grindability of Ti alloys
Kwais Chan
Marie Koike
Toru Okabe
Metallurgical and Materials Transactions A, 2006, 37 : 1323 - 1331
[46] INVESTIGATION OF SOME PHYSICAL-PROPERTIES OF TI-ZR ALLOYS
SHUSHKANOV, VM
RUSSIAN METALLURGY, 1975, (02): : 144 - 147
[47] Development of Ti-Zr alloys by powder metallurgy for biomedical applications
Amigo-Mata, Angelica
Haro-Rodriguez, Montserrat
Vicente-Escuder, Angel
Amigo-Borras, Vicente
POWDER METALLURGY, 2022, 65 (01) : 31 - 38
[48] A review in titanium-zirconium binary alloy for use in dental implants: Is there an ideal Ti-Zr composing ratio?
Zhao, Qian
Ueno, Takeshi
Wakabayashi, Noriyuki
JAPANESE DENTAL SCIENCE REVIEW, 2023, 59 : 28 - 37
[49] Replacement with Each Other of Ti and Zr in the Intermetallics of Al-(Si-)Ti-Zr Alloys
Tong Gao
Xiangfa Liu
JournalofMaterialsScience&Technology, 2013, 29 (03) : 291 - 296
[50] Replacement with Each Other of Ti and Zr in the Intermetallics of Al-(Si-) Ti-Zr Alloys
Gao, Tong
Liu, Xiangfa
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2013, 29 (03) : 291 - 296

← 1 2 3 4 5 →