Grindability of Dental Cast Ti-Zr Binary Alloys

被引：0
|
作者：
Takahashi, Masatoshi [1 ]
Kikuchi, Masafumi [1 ]
Okuno, Osamu [1 ]
机构：
[1] Tohoku Univ, Grad Sch Dent, Div Dent Biomat, Sendai, Miyagi 9808575, Japan
来源：
JOURNAL OF THE JAPAN INSTITUTE OF METALS | 2010年 / 74卷 / 06期
关键词：
biomaterial; titanium alloy; grindability; microstructure; dental alloy; MECHANICAL-PROPERTIES; TITANIUM-ZIRCONIUM; PHASE; AG;
D O I：
10.2320/jinstmet.74.351
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The purpose of this study was to improve the grindability of titanium by alloying with zirconium. The grindability of dental cast Ti-Zr binary alloys (10, 20, 30, 40 and 50 mass%Zr) was evaluated using a carborundum wheel. The Ti-Zr alloys up to 30 mass%Zr formed an a structure, and the 40 mass%Zr and 50 mass%Zr alloys formed an alpha' structure. The Ti-40 mass%Zr alloy at up to 1000 m.min(-1) and the Ti-50 mass%Zr alloy at up to 1250 m.min(-1) exhibited significantly higher grindability than titanium. More than twice the volume of metal was removed from the alloys than from titanium per minute. The improved grindability could be attributed to the a' structure in addition to the decrease in elongation. The Ti-Zr alloys, which formed an a' phase structure, are candidates for use as machinable biomaterial in dental applications.
引用
收藏
页码：351 / 355
页数：5
相关论文
共 50 条
  • [31] Nanotube morphology changes for Ti-Zr alloys as Zr content increases
    Kim, Won-Gi
    Choe, Han-Cheol
    Ko, Yeong-Mu
    Brantley, William A.
    THIN SOLID FILMS, 2009, 517 (17) : 5033 - 5037
  • [32] Quantitative strengthening evaluation of powder metallurgy Ti-Zr binary alloys with high strength and ductility
    Kondoh, Katsuyoshi
    Fukuo, Mizuki
    Kariya, Shota
    Shitara, Kazuki
    Li, Shufeng
    Alhazaa, Abdulaziz
    Umeda, Junko
    JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 852
  • [33] The effect of the solute on the structure, selected mechanical properties, and biocompatibility of Ti-Zr system alloys for dental applications
    Correa, D. R. N.
    Vicente, F. B.
    Donato, T. A. G.
    Arana-Chavez, V. E.
    Buzalaf, M. A. R.
    Grandini, C. R.
    MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2014, 34 : 354 - 359
  • [34] The grindability and wear of Ti-Cu alloys for dental applications
    Toru Okabe
    Masafumi Kikuchi
    Chikahiro Ohkubo
    Marie Koike
    Osamu Okuno
    Yutaka Oda
    JOM, 2004, 56 : 46 - 48
  • [35] The grindability and wear of Ti-Cu alloys for dental applications
    Okabe, T
    Kikuchi, M
    Ohkubo, C
    Koike, M
    Okuno, O
    Oda, Y
    JOM, 2004, 56 (02) : 46 - 48
  • [36] SYSTEM TI-ZR
    CHATTERJI, D
    HEPWORTH, MT
    HRUSKA, SJ
    METALLURGICAL TRANSACTIONS, 1971, 2 (04): : 1271 - +
  • [37] Complete Composition Tunability of Cu(Ni)-Ti-Zr Alloys
    Zhang, Ze-xiu
    Dai, Chun-li
    Xu, Jian
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2009, 25 (01) : 39 - 47
  • [38] Structure and grindability of cast Ti-5Cr-xFe alloys
    Hsu, Hsueh-Chuan
    Pan, Chang-Hung
    Wu, Shih-Ching
    Ho, Wen-Fu
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 474 (1-2) : 578 - 583
  • [39] Research on Interdiffusion Behavior of Ti-Zr Binary Alloy in the β Phase
    Feng Liang
    Li Jinshan
    Cui Yuwen
    Huang Lei
    Kou Hongchao
    Zhou Lian
    RARE METAL MATERIALS AND ENGINEERING, 2011, 40 (04) : 610 - 614
  • [40] Study of the performance of Ti-Zr based hydrogen storage alloys
    Chuang, HJ
    Chan, SLI
    JOURNAL OF POWER SOURCES, 1999, 77 (02) : 159 - 163
12345