RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments

被引：0

作者：

Bahr, Ryan ^{[1
]}

Le, Taoran ^{[1
]}

Tentzeris, Manos M. ^{[1
]}

Moscato, Stefano ^{[2
]}

Pasian, Marco ^{[2
]}

Bozzi, Maurizio ^{[2
]}

Perregrini, Luca ^{[2
]}

机构：

[1] Georgia Inst Technol, Sch Elect & Comp Engn, Atlanta, GA 30332 USA

[2] Univ Pavia, Dept Elect Comp & Biomed Engn, I-27100 Pavia, Italy

来源：

2015 45TH EUROPEAN MICROWAVE CONFERENCE (EUMC) | 2015年

关键词：

3D printing; materiel characterization; UHF band; stretchable; patch antenna; NinjaFlex; flexible electronics; RF;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

The additive manufacturing technique of 3D printing has become increasingly popular for designs that have been previously unachievable due to cost and design complexity. Due to the special mechanical properties of NinjaFlex [1], there is great potential for its use in the 3D printed fabrications of numerous RF applications, such as strain sensors and wearable RF devices. This paper investigates for the first time the RF properties of various NinjaFlex filaments of varying densities utilizing the ring resonator approach, while these properties are verified on a 3D printed patch antenna topology.

引用

页码：742 / 745

页数：4

共 50 条

[41] Mechanical evaluation of polymeric filaments and their corresponding 3D printed samples
Oviedo, A. M.
Puente, A. H.
Bernal, C.
Perez, E.
POLYMER TESTING, 2020, 88
[42] 3D printed PM filled filaments could replace MIM
Metal Powder Report, 2015, 70 (04)
[43] Adjoint Optimization of 3D Printed RF GRIN Lenses
Whiting, Eric B.
Campbell, Sawyer D.
Mackertich-Sengerdy, Galestan
Soltani, Saber
Werner, Douglas H.
Werner, Pingjuan L.
2022 16TH EUROPEAN CONFERENCE ON ANTENNAS AND PROPAGATION (EUCAP), 2022,
[44] 3D PRINTED POROUS DIELECTRIC SUBSTRATES FOR RF APPLICATIONS
SnigdhaTummala, Vana
Mian, Ahsan
Chamok, Nowrin H.
Ali, Mohammod
Clifford, Jallisa
Majumdar, Prasun
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 10, 2017,
[45] 3D Printed Substrates for the Design of Compact RF Systems
Ghazalil, Mohd Ifwat Mohd
Mondal, Saikat
Karuppuswami, Saranraj
Chahal, Premjeet
2019 IEEE 69TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2019, : 113 - 118
[46] Production and Characterization of Composite Filaments for 3D Printing
Canti, Ebubekir
Aydin, Mustafa
Yildirim, Ferhat
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2018, 21 (02): : 397 - 402
[47] Fabrication and Characterization of 3D Printed PLA
Arora, Jassimran Kaur
Bhati, Pooja
PROCEEDINGS OF THE 35TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (PPS-35), 2020, 2205
[48] Microstructural characterization of 3D printed concrete
Yu, Shiwei
Xia, Ming
Sanjayan, Jay
Yang, Lin
Xiao, Jianzhuang
Du, Hongjian
JOURNAL OF BUILDING ENGINEERING, 2021, 44
[49] 3D characterization of RF power transistors
Arnborg, Torkel
Johansson, Ted
IEEE International Conference on Microelectronic Test Structures, 1999, : 131 - 134
[50] 3D characterization of RF power transistors
Arnborg, T
Johansson, T
ICMTS 1999: PROCEEDINGS OF THE 1999 INTERNATIONAL CONFERENCE ON MICROELECTRONIC TEST STRUCTURES, 1999, : 131 - 134

← 1 2 3 4 5 →