Investigating Copper Wire Bonding Technology in Chip-on-Board Applications

被引：0
|
作者：
Krammer, Oliver [1 ]
Roka, Peter [1 ]
Jakab, Laszlo [1 ]
机构：
[1] Budapest Univ Technol & Econ, Dept Elect Technol, Budapest, Hungary
来源：
2013 PROCEEDINGS OF THE 36TH INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE) | 2013年
关键词：
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
In our experiment, the possibility of forming copper wire bonds in Chip-on-Board (COB) applications was investigated. In the experiment, such surface finishes were studied and compared which are common in printed circuit board based COB applications and can be bonded with wire bonding technologies. These finishes were immersion silver (ImAg), electroless nickel / immersion gold (ENIG) and electroless nickel / electroless palladium / immersion gold (ENEPIG). On each type of surface finish, copper wires with two diameters (33 and 300 mu m) were bonded with a TPT Ultrasonic bonder. The wire bonds then characterized by optical inspections and mechanical measurements which are detailed in the paper.
引用
收藏
页码：94 / 98
页数：5
相关论文
共 50 条
  • [41] Characterisation of chip-on-board and flip chip packaging technologies by acoustic microscopy
    Lawton, W
    Barrett, J
    MICROELECTRONICS AND RELIABILITY, 1996, 36 (11-12): : 1803 - 1806
  • [42] FEM Wire Bonding Simulation for Sensor Chip Applications
    Kraemer, F.
    Wiese, S.
    2014 15TH INTERNATIONAL CONFERENCE ON THERMAL, MECHANICAL AND MULTI-PHYSICS SIMULATION AND EXPERIMENTS IN MICROELECTRONICS AND MICROSYSTEMS (EUROSIME), 2014,
  • [43] A thin film thermoelectric cooler for Chip-on-Board assembly
    Kim, Shiho
    Lee, Hyunju
    Kim, Namjae
    Yoo, Jungho
    IEICE ELECTRONICS EXPRESS, 2010, 7 (21): : 1615 - 1621
  • [44] Millimeter-Wave Chip-on-Board Integration and Packaging
    Stoneham, Edward B.
    RF AND MICROWAVE MICROELECTRONICS PACKAGING, 2010, : 69 - 90
  • [45] CHIP-ON-BOARD ALTERS THE LANDSCAPE OF PC BOARDS.
    Keeler, Robert
    Electronic Packaging and Production, 1985, 25 (07): : 62 - 67
  • [46] Study of the electrical performance of chip-on-board (COB) devices
    Suthiwongsunthorn, N
    Kilbey, N
    Cordery, A
    IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2003, 26 (03): : 503 - 508
  • [47] Tools for evaluation of electrical performance of chip-on-board devices
    Cordery, A
    Kilbey, N
    Suthiwongsunthorn, N
    MICROELECTRONICS INTERNATIONAL, 2002, 19 (02) : 8 - 12
  • [48] Thermo-mechanical reliability during technology development of power chip-on-board assemblies with encapsulation
    Wunderle, Bernhard
    Becker, K. -F.
    Sinning, R.
    Wittler, O.
    Schacht, R.
    Walter, H.
    Schneider-Ramelow, M.
    Halser, K.
    Simper, N.
    Michel, B.
    Reichl, H.
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2009, 15 (09): : 1467 - 1478
  • [49] Evaluation of wire bonding performance, process conditions, and metallurgical integrity of chip on board wire bonds
    Rooney, DT
    Nager, DP
    Geiger, D
    Shanguan, D
    MICROELECTRONICS RELIABILITY, 2005, 45 (02) : 379 - 390
  • [50] Thermo-mechanical reliability during technology development of power chip-on-board assemblies with encapsulation
    Bernhard Wunderle
    K.-F. Becker
    R. Sinning
    O. Wittler
    R. Schacht
    H. Walter
    M. Schneider-Ramelow
    K. Halser
    N. Simper
    B. Michel
    H. Reichl
    Microsystem Technologies, 2009, 15 : 1467 - 1478
12345