Final report on EURAMET comparison on 1 kg stainless steel mass standards

被引：0

作者：

Alisic, S. ^{[1
]}

Gutfeldt, B. ^{[2
]}

Beaudoux, F. ^{[3
]}

Bezjak, M. ^{[4
]}

Coenegrachts, M. ^{[5
]}

Davidson, S. ^{[6
]}

Grgic, G. ^{[7
]}

Hanrahan, R. ^{[8
]}

van Geel, J. L. W. A. ^{[9
]}

Kacmaz, S. ^{[10
]}

Mangutova-Stoilkovska, B. ^{[11
]}

Miteva, M. ^{[12
]}

Navrozidis, G. ^{[13
]}

Neuvonen, P. T. ^{[14
]}

Nielsen, L. ^{[15
]}

Ojanen-Saloranta, M. ^{[16
]}

Pantic, D. ^{[17
]}

Parn, A. ^{[18
]}

Popa, G. F. ^{[19
]}

Snopko, L. ^{[20
]}

Spohr, I. ^{[21
]}

Conceicao, P. ^{[22
]}

Stock, M. ^{[22
]}

Vamossy, Cs ^{[23
]}

Wuthrich, C. ^{[24
]}

Zandarova, T. ^{[25
]}

Zelenka, Z. ^{[26
]}

Zuda, J. ^{[27
]}

AlQarni, Saud M. ^{[28
]}

机构：

[1] Inst Metrol B&H, Augusta Brauna 2, Sarajevo 71000, Bosnia & Herceg

[2] RISE Matteknik, Res Inst Sweden, Brinellgatan 4, S-50264 Boras, Sweden

[3] Lab Natl Metrol & Essais, 23 Ave Albert Bartholome, F-75015 Paris, France

[4] State Off Metrol, Ibrisimoviceva 11, Zagreb 10000, Croatia

[5] FPS Econ DG Qual & Safety, Metrol Div, Koning Albert II Laan 16, B-1000 Brussels, Belgium

[6] Natl Phys Lab, Hampton Rd, London TW11 0LW, England

[7] Metrol Inst Republ Slovenia, Grudnovo Nabrezje 17, Ljubljana 1000, Slovenia

[8] NSAI Natl Metrol Lab, Griffith Ave Extens,Glasnevin 11 E527, Dublin, Ireland

[9] VSL, Thijsseweg 11, NL-2628 JA Delft, Netherlands

[10] Ulusal Metrol Enstitusu, Gebze Yerleskesi, TR-41470 Gebze, Turkey

[11] Bur Metrol, Blvd Jane Sandanski 109a, Skopje 1000, North Macedonia

[12] Bulgarian Inst Metrol, 52B GM Dimitrov Blvd, Sofia 1040, Bulgaria

[13] Hellen Inst Metrol, Intersect NB6 & DA10 Ind Area Thessaloniki, Block 45, Thessaloniki 57022, TK, Greece

[14] Justervesenet, Fetveien 99, N-2007 Kjeller, Norway

[15] Danish Fundamental Metrol, Matematiktorvet 307, DK-2800 Lyngby, Denmark

[16] VTT Tech Res Ctr Finland Ltd, Ctr Metrol MIKES, Tekniikantie 1, Espoo 02150, Finland

[17] Directorate Measures & Precious Met, Mike Alasa 14, Beograd 11000, Serbia

[18] AS Metrosert, Teaduspargi 8, EE-12618 Tallinn, Estonia

[19] Inst Natl Metrol, Sos Vitan Barzesti 11, Bucharest 042122, Romania

[20] Slovensky Metrol Ustav, Karloveska 63, Bratislava 84255, Slovakia

[21] Inst Portugues Qualidade, Rua Antonio Giao 2, P-2829513 Caparica, Portugal

[22] Bur Int Poids & Mesures, Pavillon Breteuil, F-92312 Sevres, France

[23] Govt Off Capital City Budapest, Nemetvolgyi Ut 37-39, H-1124 Budapest, Hungary

[24] Eidgenoss Inst Metrol, Lindenweg 50, CH-3003 Bern, Switzerland

[25] Latvian Natl Metrol Ctr Ltd, K Valdemara Str 157, LV-1013 Riga, Latvia

[26] Bundesamt Eich & Vermessungswesen, Arltgasse 35, A-1160 Vienna, Austria

[27] Czech Metrol Inst, Okruzni 31, Brno 63800, Czech Republic

[28] Riyadh Al Muhammadiyah King Saud Univ, Saudi Stand Metrol & Qual Org, POB 3437, Riyadh 11471, Saudi Arabia

来源：

METROLOGIA | 2020年 / 57卷 / 1A期

关键词：

D O I：

10.1088/0026-1394/57/1A/07011

中图分类号：

TH7 [仪器、仪表];

学科分类号：

0804 ; 080401 ; 081102 ;

摘要：

In order to demonstrate the equivalence in calibration of mass standards among National Metrology Institutes (NMIs) of EURAMET this key comparison (KC) on 1 kg stainless steel mass standards has been carried out under the auspices of EURAMET. The comparison was undertaken with reference to the International Prototype Kilogram (IPK) as the definition of the unit of mass. The overall result shows good consistency among the participants. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA). Export citation and abstract BibTeX RIS.

引用

页数：3

共 50 条

[31] Final report: key comparison EURAMET.AUV.A-K5
Avison, Janine
Harris, Peter
Robinson, Stephen
Rodrigues, Dominique
Guglielmone, Claudio
Hof, Christian
Sadikoglu, Enver
Chushkov, Marin
Zelenika, Slobodan
Rosenkrantz, Peter
Andersson, Hakan
Fedtke, Thomas
Koch, Christian
Martin, Nieves Medina
Ruiz, Salustiano
Shawky, Hany
METROLOGIA, 2019, 56 (1A) : 1 - 43
[32] EURAMET Supplementary Comparison, EURAMET.L-S20 (#1169) Comparison of laser distance measuring instruments Final Report
Wisniewski, Mariusz
Ramotowski, Zbigniew
METROLOGIA, 2014, 51
[33] Final report on key comparison EURAMET.AUV.V-K2
Kolasa, Joanna
Virovska, Daniela
METROLOGIA, 2020, 57 (1A)
[34] Final Report of EURAMET.EM-S26 Supplementary Comparison Inductance measurements of 100 mH at 1 kHz EURAMET project 816
Dierikx, E.
Nestor, A.
Melcher, J.
Koelling, A.
Callegaro, L.
METROLOGIA, 2012, 49
[35] Final report on the supplementary comparison EURAMET.AUV.V-S2
Rosenkranz P.
Hof C.
Metrologia, 2022, 59 (1 A)
[36] Final report EURAMET Supplementary Comparison EURAMET.EM.RF-S27 "Antenna factor for Loop Antennas"
Pythoud, Frederic
Borsero, Michele
Bownds, Daniel
Cakir, Soydan
Cetintas, Mustafa
Drazil, Karel
Gentle, David
Giordano, Domenico
Harmon, Stuart
Kupec, Josef
Le Sage, Yannick
Muehlemann, Beat
Ulvr, Michal
Vizio, Giuseppe
Zhao, Dongsheng
METROLOGIA, 2014, 51
[37] FINAL REPORT SIM COMPARISON IN MASS STANDARDS SIMMM-K5
Kornblit, F.
Leiblich, J.
Becerra, L. O.
Pena, L. M.
Lujan, L.
Diaz, J. C.
Centeno, L. M.
Ramos, O.
Rodriguez, S.
Santo, C.
Caceres, J.
Garcia, F.
Leyton, F.
Claude, J.
Loayza, V. M.
Cacais, F. A.
METROLOGIA, 2016, 53
[38] Final report EURAMET.EM-S30 on EURAMET Project 1081: Supplementary comparison of measurements of current transformers
Dimitrov, Emil
Kumanova, Ginka
Styblikova, Renata
Draxler, Karel
Dierikx, Erik
METROLOGIA, 2010, 47
[39] EURAMET Key-Comparison Luminous Intensity EURAMET.PR-K3.a Final Report, May 2014
Sperling, A.
Sauter, G.
Lindner, D.
Eltmann, M.
METROLOGIA, 2014, 51
[40] Mass stability of 1-kg stainless steel weights in the past 13 years
Ueki, Masaaki
Mizishima, Shigeki
Sun, Jian-Xin
Ueda, Kazunaga
2008 PROCEEDINGS OF SICE ANNUAL CONFERENCE, VOLS 1-7, 2008, : 984 - 987

← 1 2 3 4 5 →