Final report on EURAMET comparison on 1 kg stainless steel mass standards

被引：0

作者：

Alisic, S. ^{[1
]}

Gutfeldt, B. ^{[2
]}

Beaudoux, F. ^{[3
]}

Bezjak, M. ^{[4
]}

Coenegrachts, M. ^{[5
]}

Davidson, S. ^{[6
]}

Grgic, G. ^{[7
]}

Hanrahan, R. ^{[8
]}

van Geel, J. L. W. A. ^{[9
]}

Kacmaz, S. ^{[10
]}

Mangutova-Stoilkovska, B. ^{[11
]}

Miteva, M. ^{[12
]}

Navrozidis, G. ^{[13
]}

Neuvonen, P. T. ^{[14
]}

Nielsen, L. ^{[15
]}

Ojanen-Saloranta, M. ^{[16
]}

Pantic, D. ^{[17
]}

Parn, A. ^{[18
]}

Popa, G. F. ^{[19
]}

Snopko, L. ^{[20
]}

Spohr, I. ^{[21
]}

Conceicao, P. ^{[22
]}

Stock, M. ^{[22
]}

Vamossy, Cs ^{[23
]}

Wuthrich, C. ^{[24
]}

Zandarova, T. ^{[25
]}

Zelenka, Z. ^{[26
]}

Zuda, J. ^{[27
]}

AlQarni, Saud M. ^{[28
]}

机构：

[1] Inst Metrol B&H, Augusta Brauna 2, Sarajevo 71000, Bosnia & Herceg

[2] RISE Matteknik, Res Inst Sweden, Brinellgatan 4, S-50264 Boras, Sweden

[3] Lab Natl Metrol & Essais, 23 Ave Albert Bartholome, F-75015 Paris, France

[4] State Off Metrol, Ibrisimoviceva 11, Zagreb 10000, Croatia

[5] FPS Econ DG Qual & Safety, Metrol Div, Koning Albert II Laan 16, B-1000 Brussels, Belgium

[6] Natl Phys Lab, Hampton Rd, London TW11 0LW, England

[7] Metrol Inst Republ Slovenia, Grudnovo Nabrezje 17, Ljubljana 1000, Slovenia

[8] NSAI Natl Metrol Lab, Griffith Ave Extens,Glasnevin 11 E527, Dublin, Ireland

[9] VSL, Thijsseweg 11, NL-2628 JA Delft, Netherlands

[10] Ulusal Metrol Enstitusu, Gebze Yerleskesi, TR-41470 Gebze, Turkey

[11] Bur Metrol, Blvd Jane Sandanski 109a, Skopje 1000, North Macedonia

[12] Bulgarian Inst Metrol, 52B GM Dimitrov Blvd, Sofia 1040, Bulgaria

[13] Hellen Inst Metrol, Intersect NB6 & DA10 Ind Area Thessaloniki, Block 45, Thessaloniki 57022, TK, Greece

[14] Justervesenet, Fetveien 99, N-2007 Kjeller, Norway

[15] Danish Fundamental Metrol, Matematiktorvet 307, DK-2800 Lyngby, Denmark

[16] VTT Tech Res Ctr Finland Ltd, Ctr Metrol MIKES, Tekniikantie 1, Espoo 02150, Finland

[17] Directorate Measures & Precious Met, Mike Alasa 14, Beograd 11000, Serbia

[18] AS Metrosert, Teaduspargi 8, EE-12618 Tallinn, Estonia

[19] Inst Natl Metrol, Sos Vitan Barzesti 11, Bucharest 042122, Romania

[20] Slovensky Metrol Ustav, Karloveska 63, Bratislava 84255, Slovakia

[21] Inst Portugues Qualidade, Rua Antonio Giao 2, P-2829513 Caparica, Portugal

[22] Bur Int Poids & Mesures, Pavillon Breteuil, F-92312 Sevres, France

[23] Govt Off Capital City Budapest, Nemetvolgyi Ut 37-39, H-1124 Budapest, Hungary

[24] Eidgenoss Inst Metrol, Lindenweg 50, CH-3003 Bern, Switzerland

[25] Latvian Natl Metrol Ctr Ltd, K Valdemara Str 157, LV-1013 Riga, Latvia

[26] Bundesamt Eich & Vermessungswesen, Arltgasse 35, A-1160 Vienna, Austria

[27] Czech Metrol Inst, Okruzni 31, Brno 63800, Czech Republic

[28] Riyadh Al Muhammadiyah King Saud Univ, Saudi Stand Metrol & Qual Org, POB 3437, Riyadh 11471, Saudi Arabia

来源：

METROLOGIA | 2020年 / 57卷 / 1A期

关键词：

D O I：

10.1088/0026-1394/57/1A/07011

中图分类号：

TH7 [仪器、仪表];

学科分类号：

0804 ; 080401 ; 081102 ;

摘要：

In order to demonstrate the equivalence in calibration of mass standards among National Metrology Institutes (NMIs) of EURAMET this key comparison (KC) on 1 kg stainless steel mass standards has been carried out under the auspices of EURAMET. The comparison was undertaken with reference to the International Prototype Kilogram (IPK) as the definition of the unit of mass. The overall result shows good consistency among the participants. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA). Export citation and abstract BibTeX RIS.

引用

页数：3

共 50 条

[11] Report on EUROMET key comparison of 1 kg standards in stainless steel (EUROMETMM-K4)
Perkin, M.
METROLOGIA, 2008, 45
[12] Final report on bilateral key comparison EUROMETMM-K4.1: Comparison of 1 kg stainless steel weights
Grum, Matej
Nielsen, Lars
METROLOGIA, 2008, 45
[13] EURAMET Supplementary Comparison EURAMET.L-S24 Involute Gear Standards Final Report October 2013
Kniel, Karin
METROLOGIA, 2014, 51
[14] AFRIMETS - INTRA-AFRICA METROLOGY SYSTEM Final Report of AFRIMETSMM-S6 Supplementary Comparison of 100 mg, 100 g, 500 g, 1 kg and 5 kg Stainless Steel Mass Standards
Mautjana, Thomas
Matali, Simasiku
Molefe, Peter
Albasini, Geraldo
Mutsimba, Fedeth
Ramasawmy, Vaneeda
Mutale, Daniel
Ngindu, Florian
Armah, Michael
Kiwanuka, John
Rusimbi, Vida
Richmond, Herve
METROLOGIA, 2018, 55
[15] Supplementary Comparison EURAMET.EM-S32 Comparison of Resistance Standards at 1 TΩ and 100 TΩ Final Report
Jeckelmann, Beat
van der Beek, J. H. N.
Capra, Pier Paolo
Chrobok, Petr
Cirneanu, Liliana
Dudek, Edy-ta
Erkan, Omer
Flouda, Irene
Galliana, Flavio
Godinho, Isabel
Gunnarsson, Ove
Iisakka, Ilkka
Istrate, Daniela
Lindic, Matjaz
Nicolas, Jacques
Orzepowski, Marcin
Pezel, Alain
Raso, Felix
Rietveld, Gert
Schumacher, Bernhard
Snopek, Lidia
Tenev, Andrey
Vrabcek, Peter
METROLOGIA, 2013, 50
[16] Final report on APMP comparison of 1 kg mass standards APMPMM-K1 (APMP-IC-3-96)
Tulasombut, Veera
Sutton, Chris M.
METROLOGIA, 2004, 41
[17] The final report for CCM.M-K7: key comparison of 5 kg, 100 g, 10 g, 5 g and 500 mg stainless steel mass standards
Lee, Sungjun
Borys, Michael
Abbott, Patrick
Becerra, Luis Omar
Eltawil, Alaaeldin A.
Jian, Wang
Malengo, Andrea
Medina, Nieves
Snegov, Victor
Wuethrich, Christian
METROLOGIA, 2017, 54
[18] On EURAMET bilateral comparison on volume of mass standards Project number: 1356 (EURAMET.M.D-S2) Volume of mass standards of 10g, 20 g, 200 g, 1 kg
Zelenka Z.
Davidson S.
Vámossy C.
2016, IOP Publishing Ltd (53)
[19] RMO Key Comparison EURAMET.EM-K2.1 Comparison of Resistance Standards at 10 MΩ and 1 GΩ Final Report
Jeckelmann, Beat
Aziz, Hani Saad Abdel
Dudek, Edyta
Ilic, Damir
Lenicek, Ivan
Tadros, Nadia Nassif
Orzepowski, Marcin
Tenev, Andrey
METROLOGIA, 2013, 50
[20] Final report of CCM key comparison of mass standards CCM.M-K6, 50 kg
Abbott, Patrick J.
Becerra, Luis O.
Borys, Michael
Davidson, Stuart
Jacques, Claude
Lee, Sungjun
Loayza, Victor
Malengo, Andrea
Medina, Ma Nieves
METROLOGIA, 2015, 52

← 1 2 3 4 5 →