Effect of milling speed on the formation of Ti-6Al-4V via mechanical alloying

被引：8
|
作者：
Daswa, P. [1 ]
Gxowa, Z. [1 ]
Monareng, M. J., I [1 ]
Mutombo, K. [1 ]
机构：
[1] CSIR, Light Met Mat Sci & Mfg, Meiring Naude Rd, ZA-0185 Pretoria, South Africa
来源：
CONFERENCE OF THE SOUTH AFRICAN ADVANCED MATERIALS INITIATIVE (COSAAMI-2018) | 2018年 / 430卷
关键词：
D O I：
10.1088/1757-899X/430/1/012030
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ti-6Al-4V alloys are well known for good corrosion resistance, excellent surface oxide biocompatibility and high specific strength. This paper investigates the influence of milling parameters on the founation of Ti-6Al-4V alloy processed using mechanical alloying. A mixture of CP Ti and master alloy (60Al-40V) powder were milled using a high energy ball mill (HEBM) in order to produce a mechanically alloyed Ti-6Al-4V alloy powder. Milling was carried out at a constant milling time of 5 hours at varying speeds of 800, 900, 1000 and 1100 rpm in order to investigate the influence of speed on the founation of Ti-6Al-4V alloy. Scanning electron microscopy with energy dispersive analysis (EDX) and X-ray diffraction (XRD) were performed on the mechanically alloyed powder to investigate the chemical homogeneity and the founation of alpha (alpha) and beta (beta) phase during the mechanical alloying of CP Ti and 60Al-40V.
引用
收藏
页数：5
相关论文
共 50 条
  • [41] Wear mechanism analysis in milling of Ti-6Al-4V alloy
    Jaffery, Syed H. I.
    Khan, Mushtaq
    Sheikh, Nadeem A.
    Mativenga, Paul
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2013, 227 (08) : 1148 - 1156
  • [42] The effect of microstructure on mechanical behaviour for titanium alloy (Ti-6Al-4V)
    Kwon, JD
    Bae, YT
    Choi, SJ
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2003, 17 (8-9): : 1297 - 1303
  • [43] Effect of anisotropy on mechanical properties of Ti-6Al-4V in superplastic region
    Wahed, M. A.
    Gupta, A. K.
    Singh, S. K.
    Kotkunde, N.
    INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS & MANUFACTURING TECHNOLOGIES, 2018, 346
  • [44] Effect of microstructure on mechanical properties and topography of a Ti-6Al-4V alloy
    Azkarate, I.
    Gil-Negrete, A.
    Irisarri, A.M.
    Revista de Metalurgia (Madrid), 1988, 24 (06): : 372 - 378
  • [45] Effect of porosity on mechanical and electrochemical properties of Ti-6Al-4V alloy
    Martinez, Carola
    Guerra, Carolina
    Silva, Daniela
    Cubillos, Mariela
    Briones, Francisco
    Munoz, Lisa
    Paez, M. A.
    Aguilar, Claudio
    Sancy, Mamie
    ELECTROCHIMICA ACTA, 2020, 338
  • [46] TEFLON TUBES IN HEAT-EXCHANGERS SPEED CHEMICAL MILLING OF TI-6AL-4V FORGINGS
    不详
    METAL PROGRESS, 1972, 101 (06): : 85 - &
  • [47] THE EFFECT OF EXPOSURE ON THE MECHANICAL-PROPERTIES OF THE TI-6AL-4V ALLOY
    BENDERSKY, L
    ROSEN, A
    ENGINEERING FRACTURE MECHANICS, 1984, 20 (02) : 303 - 311
  • [48] PERFORMANCE OF A COATED CEMENTED CARBIDE TOOL IN HIGH SPEED MILLING OF TI-6AL-4V ALLOY
    Tan, Guangyu
    Zhang, Yuhua
    Li, Guanghui
    Liu, Guangjun
    Rong, Yiming
    JOURNAL OF ADVANCED MANUFACTURING SYSTEMS, 2013, 12 (02) : 131 - 146
  • [49] High Speed Infrared Measurement of the Cutting Temperature during Milling of Titanium Ti-6Al-4V
    Obermair, Franz
    Feichtenschlager, Hans-Peter
    2022 IEEE 13TH INTERNATIONAL CONFERENCE ON MECHANICAL AND INTELLIGENT MANUFACTURING TECHNOLOGIES (ICMIMT 2022), 2022, : 196 - 201
  • [50] Effect of rotation speed on microstructure and mechanical properties of Ti-6Al-4V friction stir welded joints
    Zhou, L.
    Liu, H. J.
    Liu, Q. W.
    MATERIALS & DESIGN, 2010, 31 (05) : 2631 - 2636
12345