Effect of milling speed on the formation of Ti-6Al-4V via mechanical alloying

被引：8
|
作者：
Daswa, P. [1 ]
Gxowa, Z. [1 ]
Monareng, M. J., I [1 ]
Mutombo, K. [1 ]
机构：
[1] CSIR, Light Met Mat Sci & Mfg, Meiring Naude Rd, ZA-0185 Pretoria, South Africa
来源：
CONFERENCE OF THE SOUTH AFRICAN ADVANCED MATERIALS INITIATIVE (COSAAMI-2018) | 2018年 / 430卷
关键词：
D O I：
10.1088/1757-899X/430/1/012030
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ti-6Al-4V alloys are well known for good corrosion resistance, excellent surface oxide biocompatibility and high specific strength. This paper investigates the influence of milling parameters on the founation of Ti-6Al-4V alloy processed using mechanical alloying. A mixture of CP Ti and master alloy (60Al-40V) powder were milled using a high energy ball mill (HEBM) in order to produce a mechanically alloyed Ti-6Al-4V alloy powder. Milling was carried out at a constant milling time of 5 hours at varying speeds of 800, 900, 1000 and 1100 rpm in order to investigate the influence of speed on the founation of Ti-6Al-4V alloy. Scanning electron microscopy with energy dispersive analysis (EDX) and X-ray diffraction (XRD) were performed on the mechanically alloyed powder to investigate the chemical homogeneity and the founation of alpha (alpha) and beta (beta) phase during the mechanical alloying of CP Ti and 60Al-40V.
引用
收藏
页数：5
相关论文
共 50 条
  • [21] The Simulation of Cutting Force and Temperature in High-Speed Milling of Ti-6Al-4V
    Yang, Zhenchao
    Zhang, Dinghua
    Huang, Xinchun
    Yao, Changfeng
    Ren, Junxue
    MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3, 2011, 139-141 : 768 - 771
  • [22] Surface integrity in high speed end milling of titanium alloy Ti-6Al-4V
    Daymi, A.
    Boujelbene, M.
    Ben Amara, A.
    Bayraktar, E.
    Katundi, D.
    MATERIALS SCIENCE AND TECHNOLOGY, 2011, 27 (01) : 387 - 394
  • [23] Experimental Study on Surface Integrity of Ti-6Al-4V in High Speed Side Milling
    杨晓勇
    任成祖
    王焱
    陈光
    Transactions of Tianjin University, 2012, 18 (03) : 206 - 212
  • [24] Experimental study on the chip morpholgy in high speed milling Ti-6Al-4V alloy
    School of Mechanical and Power Engineering, North University of China, Taiyuan
    030051, China
    不详
    030024, China
    Jixie Gongcheng Xuebao, 3 (196-205):
  • [25] Experimental study on surface integrity of ti-6al-4v in high speed side milling
    Yang X.
    Ren C.
    Wang Y.
    Chen G.
    Transactions of Tianjin University, 2012, 18 (03) : 206 - 212
  • [26] Experimental Study on Surface Integrity of Ti-6Al-4V in High Speed Side Milling
    杨晓勇
    任成祖
    王焱
    陈光
    Transactions of Tianjin University, 2012, (03) : 206 - 212
  • [27] Simulation of The High-speed Milling Temperature of Titanium Alloy Ti-6Al-4V
    Huang, Xinchun
    Yao, Changfeng
    Zhang, Dinghua
    Ren, Junxue
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-3, 2011, 314-316 : 1171 - 1175
  • [28] Electrical discharge shape memory alloying of Ti-6Al-4V: Mechanisms and mechanical properties
    Arun, Ilangovan
    Velkavrh, Igor
    Rani, Uma R.
    Annamalai, Sivakumar
    Yuvaraj, C.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2024,
  • [29] Tool wear behavior of thermal-mechanical effect for milling Ti-6Al-4V alloy in cryogenic
    Wang, Fengbiao
    Wang, Yongqing
    Liu, Haibo
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 94 (5-8): : 2077 - 2088
  • [30] Tool wear behavior of thermal-mechanical effect for milling Ti-6Al-4V alloy in cryogenic
    Wang, Fengbiao (wangfb@dlut.edu.cn), 1600, Springer London (94): : 5 - 8
12345