Effect of milling speed on the formation of Ti-6Al-4V via mechanical alloying

被引：8
|
作者：
Daswa, P. [1 ]
Gxowa, Z. [1 ]
Monareng, M. J., I [1 ]
Mutombo, K. [1 ]
机构：
[1] CSIR, Light Met Mat Sci & Mfg, Meiring Naude Rd, ZA-0185 Pretoria, South Africa
来源：
CONFERENCE OF THE SOUTH AFRICAN ADVANCED MATERIALS INITIATIVE (COSAAMI-2018) | 2018年 / 430卷
关键词：
D O I：
10.1088/1757-899X/430/1/012030
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ti-6Al-4V alloys are well known for good corrosion resistance, excellent surface oxide biocompatibility and high specific strength. This paper investigates the influence of milling parameters on the founation of Ti-6Al-4V alloy processed using mechanical alloying. A mixture of CP Ti and master alloy (60Al-40V) powder were milled using a high energy ball mill (HEBM) in order to produce a mechanically alloyed Ti-6Al-4V alloy powder. Milling was carried out at a constant milling time of 5 hours at varying speeds of 800, 900, 1000 and 1100 rpm in order to investigate the influence of speed on the founation of Ti-6Al-4V alloy. Scanning electron microscopy with energy dispersive analysis (EDX) and X-ray diffraction (XRD) were performed on the mechanically alloyed powder to investigate the chemical homogeneity and the founation of alpha (alpha) and beta (beta) phase during the mechanical alloying of CP Ti and 60Al-40V.
引用
收藏
页数：5
相关论文
共 50 条
  • [1] Preparation of Nanocrystalline Ti-6Al-4V Alloy by Mechanical Alloying
    Wang, Jiahui (957302535@qq.com), 1600, Science Press (46):
  • [2] Preparation of Nanocrystalline Ti-6Al-4V Alloy by Mechanical Alloying
    Wang Jiahui
    Wu Chengling
    Shi Qingnan
    RARE METAL MATERIALS AND ENGINEERING, 2017, 46 (03) : 783 - 789
  • [3] Effect of niobium surface alloying on the antioxidation of Ti-6Al-4V
    Wang Wenbo
    Xu Zhong
    He Zhiyong
    Wang Zhenxia
    Zhang Pingze
    RARE METAL MATERIALS AND ENGINEERING, 2007, 36 (05) : 869 - 873
  • [4] Laser Gas Alloying of Ti-6Al-4V
    Majumdar, Jyotsna Dutta
    LASERS IN MANUFACTURING 2011: PROCEEDINGS OF THE SIXTH INTERNATIONAL WLT CONFERENCE ON LASERS IN MANUFACTURING, VOL 12, PT A, 2011, 12 : 472 - 477
  • [5] Microstructures evolution, formation mechanisms and properties of Sicp/Al composite coatings on Ti-6Al-4v substrate via mechanical alloying method
    Jiang, Jian
    Shen, Yifu
    Feng, Xiaomei
    SURFACES AND INTERFACES, 2020, 19
  • [6] Effect of Various Cooling Strategies on Surface Roughness of High Speed Milling Ti-6Al-4V
    Yang, X. Y.
    Ren, C. Z.
    Chen, G.
    Han, B.
    Wang, Y.
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIV, 2012, 697-698 : 49 - +
  • [7] Fabrication of Al-Si coating on Ti-6Al-4V substrate by mechanical alloying
    Chen, Cheng
    Lu, Congyang
    Feng, Xiaomei
    Shen, Yifu
    MATERIALS AND MANUFACTURING PROCESSES, 2018, 33 (02) : 186 - 195
  • [8] Use of nitrogen gas in high-speed milling of Ti-6Al-4V
    柯映林
    董辉跃
    刘刚
    章明
    Transactions of Nonferrous Metals Society of China, 2009, 19 (03) : 530 - 534
  • [9] Analysis of Burr Formation in Low Speed Micro-milling of Titanium Alloy (Ti-6Al-4V)
    Ul Rehman, Gulfam
    Jaffery, Syed Husain Imran
    Khan, Mushtaq
    Ali, Liaqat
    Khan, Ashfaq
    Butt, Shahid Ikramullah
    MECHANICAL SCIENCES, 2018, 9 (02) : 231 - 243
  • [10] Tool wear in high-speed milling of Ti-6Al-4V alloy
    Zhang, Song
    Li, Jianfeng
    Liu, Fengshi
    Jiang, Feng
    ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY IX, 2008, 375-376 : 435 - 439
12345