An investigation on fretting wear behaviour of MOS2-bonded coating on AISI 4340 steel

被引：4
|
作者：
Ramesh, R. [1 ]
Gnanamoorthy, R. [1 ]
机构：
[1] Indian Inst Technol, Dept Mech Engn, Madras 600036, Tamil Nadu, India
来源：
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY | 2007年 / 221卷 / J1期
关键词：
fretting wear; molybdenum disulphide coating; steel; mechanisms;
D O I：
10.1243/13506501JET171
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Fretting wear characteristics of Molybdenum disulphide (MoS2)-bonded solid lubricant coating on structural steel, AISI 4340, when fretted against hardened-tempered bearing steel, AISI 52100 are reported in this paper. Fretting wear tests were conducted at different normal loads and at constant slip amplitude of 60 mu m. Coefficient of friction under fretting conditions and wear resistance were measured. The MoS2-bonded solid lubricant offers improved fretting wear resistance against bearing steels. Substrate hardness has influenced the coating behaviour at high loads. The fretting wear resistance also depends upon the normal load and the nature of contact, stick slip, or gross slip.
引用
收藏
页码：41 / 47
页数：7
相关论文
共 50 条
  • [41] Wear Resistance Evaluation of Self-Fluxing Nickel-Based Coating Deposited on AISI 4340 Steel by Atmospheric Plasma Spray
    Moncao, Francisco C.
    Caliari, Felipe R.
    Freitas, Filipe E.
    Couto, Antonio A.
    Augusto, Arnaldo
    Lima, Carlos R. C.
    Massi, Marcos
    METALS, 2024, 14 (05)
  • [42] Study of sliding wear behaviour at high temperature of PVD MoZrSiAiN coating deposited on AISI 1045 steel
    Staia, MH
    D'Alessandria, M
    Cruz, MR
    Castro, A
    SURFACE ENGINEERING, 2003, 19 (04) : 292 - 298
  • [43] Dry sliding wear behaviour of steel (AISI 1078) after coating with steam treatment and manganese phosphating
    Kaushik, Siddhant
    Panwar, Ranvir Singh
    TRIBOLOGY-MATERIALS SURFACES & INTERFACES, 2021, 15 (04) : 292 - 302
  • [44] Experimental investigation of cutting force, surface roughness and tool wear in high-speed dry milling of AISI 4340 steel
    Guangming Zheng
    Xiang Cheng
    Li Li
    Rufeng Xu
    Yebing Tian
    Journal of Mechanical Science and Technology, 2019, 33 : 341 - 349
  • [45] Experimental investigation of cutting force, surface roughness and tool wear in high-speed dry milling of AISI 4340 steel
    Zheng, Guangming
    Cheng, Xiang
    Li, Li
    Xu, Rufeng
    Tian, Yebing
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2019, 33 (01) : 341 - 349
  • [46] Investigation of hot deformation characteristics of AISI 4340 steel using processing map
    Sanrutsadakorn, Apichat
    Uthaisangsuk, Vitoon
    Suranuntchai, Surasak
    Thossatheppitak, Borpit
    ADVANCED MATERIALS AND ENGINEERING MATERIALS II, 2013, 683 : 301 - +
  • [47] Effect of laser shock peening on fretting wear behaviour of AISI 304 stainless alloy
    Li, Chao
    Amanov, Auezhan
    Wang, Can
    Wang, Lihua
    Wahab, Magd Abdel
    TRIBOLOGY INTERNATIONAL, 2024, 193
  • [48] Influence of pad span on fretting fatigue behaviour of AISI 304 stainless steel
    M. Jayaprakash
    S. Ganesh Sundara Raman
    Journal of Materials Science, 2007, 42 : 4308 - 4315
  • [49] Influence of pad span on fretting fatigue behaviour of AISI 304 stainless steel
    Jayaprakash, M.
    Raman, S. Ganesh Sundara
    JOURNAL OF MATERIALS SCIENCE, 2007, 42 (12) : 4308 - 4315
  • [50] Plain fatigue and fretting fatigue behaviour of AISI 304 austenitic stainless steel
    Raman, S. Ganesh Sundara
    Jayaprakash, M.
    MATERIALS SCIENCE AND TECHNOLOGY, 2007, 23 (01) : 45 - 54
12345